带CY8CKIT-024调谐器的CY8CKIT-042套件不起作用

大家好，
在我第一次体验CY8CKIT-042先锋套件时，我使用了像线性滑块那样的示例项目。
我也尝试了一些变化，只使用一个滑块元素作为一个按钮。
启动调谐器总是工作得很好。
但现在我开始使用CY8CKIT-024 CAPSENSE接近盾。我使用以下CyPress产品页面的示例项目：
HTTP://www. CyPress .COM/DICONtiON/APPLION-NOTES/AN92249近距离感测
不管我尝试什么样的项目（我只使用那些用0042命名的项目），没有一个让我用调谐器工作。调谐器总是抛出：
“读取操作失败！CKII2C连接“。
EZI2C SCB块的所有设置与文档AN92249完全匹配，这也是我在前面提到的链接中找到的。
更新组件，建立和闪烁工作良好（我使用PSoC创建者4.1）。
有什么我可以忘记的设定吗？
谢谢！



     以下为原文
  Hello together,

during my first experiences with the CY8CKIT-042 Pioneer Kit i worked with example projects like the one with the linear slider.
I also tried some variations by using only one of the slider elements as a button.

Starting the Tuner always worked well.

But now i started to work with the CY8CKIT-024 CAPSENSE PROXIMITY SHIELD in addition. I use the example projects from the following Cypress product page:
http://www.cypress.com/documentation/application-notes/an92239-proximity-sensing-capsense

Doesn't matter which example project i try (i only use the ones that are named with 0042), none of them lets me work with the Tuner. The tuner always throws:
"Read operation failed! Ceck I2C connection".
All my settings of the EzI2C SCB block exactly match the document AN92239, which is also to be found on the link i mentioned before.
Updating components, Building and Flashing were working well ( I'm using PSoC creator 4.1).

Is there any setting that i may could have forget?

Thanks a lot!