NUC8i7HNK无法从USB启动

我有一个带有UEFI OS映像的USB驱动器，并使用它成功安装了操作系统。
但是当我下次尝试从这个USB驱动器启动时，它刚刚从启动菜单和视觉BIOS中的可启动设备列表中消失。
我使用前面板USB安装操作系统，但之后我尝试使用后面板上的一些USB端口，经过几次尝试后，我的所有u***端口都停止识别USB启动驱动器。
但港口本身运作良好。
当我启动到OS外围设备工作正常，我甚至可以访问连接到前面板USB的笔式驱动器上的数据。
另外u***键盘和鼠标连接到相同的端口在Visual BIOS中正常工作。
所以这不是硬件问题。
BIOS版本为0049。



以下为原文

I have an USB drive with UEFI OS image and successfully installed OS using it.
But when I tried to boot from this USB drive for the next time it just gone from boot menu and from list of bootable devices in visual bios.
I used the front panel USB to install OS but after that I've tried to use some of USB ports on back panel and after several attempts ALL of my u*** ports stopped to recognise USB boot drive.

But ports itself are working fine. When I boot into OS peripheral works fine and I can even access data on the pen drive attached to the front panel USB.
Also u*** keyboard and mouse connected to same ports working fine in Visual BIOS. So this is not a hardware issue I guess.

BIOS version is 0049.