Spartan 6，tcl文件的9K Block RAM初始化是否正常工作

大家好，
我正在尝试根据生成的报告文件确定我实现的初始化9k Block Ram的tcl命令是否正常工作。
我试图在tcl中实现基于AR＃39999的“-g INIT_9K：YES”命令。
当我将开关设置为“YES”时，我在位源摘要中得到以下信息：
信息：Bitgen：341  - 此设计使用一个或多个9K Block RAM（RAMB8BWER）。
用户定义和默认的9K Block RAM初始化数据需要特殊的比特流格式。
有关更多信息，请参阅Xilinx答复记录39999。
但是，当我将开关设置为“NO”时，我不会在位序摘要中获得前面的信息行。
是否有其他方法来检查交换机是否正常工作，因为上面显示的info语句没有特别提到交换机已设置且未包含在“Bitgen选项摘要”中。
谢谢。



以下为原文

Hi all,

I'm trying to determine if the tcl command I've implemented to initialize the 9k Block Ram is working correctly based on the reports files generated.

I've tried to implement the "-g INIT_9K:YES" command based on AR# 39999 in tcl.
When I have the switch set at "YES", then I get the following info statment in the bit gen summary:

INFO:Bitgen:341 - This design is using one or more 9K Block RAMs (RAMB8BWER).
   9K Block RAM initialization data, both user defined and default, requires a
   special bit stream format.  For more information, please reference Xilinx
   Answer Record 39999.

However when I have the switch set at "NO", then I do not get the preceding info line in the bit gen summary.

Is there some other way to check whether the switch is working correctly, since the info statement shown above does not specifiically mention that the switch has been set and it is not included in the "Summary of Bitgen Options".

Thanks.