AN91162中的高内存使用率怎么减少

BLE本身使用了大部分的Flash和RAM使用。
如果你删除了BLE组件，但是把剩下的代码放在芯片中，使用率应该从大约66%下降到3%左右。
BLE不是一个非常友好的组件



     以下为原文
  BLE itself uses most of the flash and ram usage sadly
If you remove the BLE component, but leave the rest of your code in the chip, the use should drop from roughly 66% down to 3% or so...
BLE is not a very space friendly component

我希望在我的应用程序无线连接。如果BLE是内存饥饿，那么CyPress是否有其他解决无线连接的方案？
此外，我所报告的内存利用率是CY8C4247LQI-BL43。如果我升级到CY8C4248LQQ-BL583T，那么我会以稍高的价格获得双倍内存。但真的很高兴知道是否有其他最佳的解决方案存在！
谢谢，
阿迪亚



     以下为原文
  I want wireless connectivity in my application. If BLE is that memory hungry then does Cypress have any other solution for wireless connectivity?
 
Also the memory utilization that I reported was for CY8C4247LQI-BL483. If I upgrade to CY8C4248LQQ-BL583T, then I get double memory at slightly higher price. But it really nice to know if any other optimal solution exists!
 
Thanks,
Aditya

我自己看了CyPress模块有点，但没有看到比256K更大的内存，其他选择将是Wi-Fi，WICE，或其他PSoC 3/4 / 5/6芯片之一。
一个HIMA可能有更多的信息推荐，因为我对CyPress有哪些芯片没有太多的了解。
PSoC 6具有1 MB的闪存空间，但这可能更昂贵。
如果你打开CyPress的一个案例，他们可以帮助你减少BLE代码的占用，或者找到你需要的合适的芯片/更低的价格等等。
虽然，33%的空间对于应用程序来说是足够的，这些应用程序主要是通过无线/蓝牙接口进行通信的。潜在地，改变配置文件/组件设置可能会产生更好的结果，但我认为不是很有效。



     以下为原文
  I looked at the cypress modules myself a little bit, but didn't see larger memory than the 256K, and the other choices would be WI-FI, WICED, or one of the other PSoC 3/4/5/6 chips.
A hima might have more information on recommendations, as I don't have great knowledge on which chips Cypress has available
The PSoC 6 has 1 MB of flash space, but that is probably more expensive
If you open a case with Cypress, potentially they can help you reduce the footprint of the BLE code, or to find the right chip that you need/lower price, etc.
Although, 33% of space is quite enough for applications that are mostly communicating through the wireless/bluetooth interface for the application. Potentially, changing the profile/component settings might yield better results as well, but not very effectively I think.