PNA-X FW 1.10.47.03 SMC测量类X轴问题

嗨，我在这里使用PNA-X系统上的A.10.47.03固件。
我无法升级到a.10.49.02，因为有一个说明它无法与Opt 90一起正常工作。我遇到的问题是，现在创建一个新的smc时行为似乎有所不同
具有此固件版本的测量通道。
之前，默认的x轴使用混频器的输出频率（用于SC21测量）。
但现在，它似乎已经改为默认输入频率范围！
它似乎也影响了VMC测量类测量。
但是，NFX和IMDX的行为与以前的固件相同。
（即默认X轴是调音台的输出频率。）如果您的团队可以修复SMC＆amp;
VMC默认的x轴行为回到先前的固件行为，这将非常感激。
谢谢，rok



     以下为原文

  Hi,

I am using A.10.47.03 firmware on the PNA-X systems here. I can't upgrade to the a.10.49.02, since there's a note that it won't work properly with Opt 90.  

The issue I'm encountering is that there seems to be a difference in behavior now when creating a new smc measurement channel with this firmware version. Before, the default x-axis was using the output frequency of the mixer (for a SC21 measurement). But now, it seems that it's changed to default to the input frequency range! It seems it also affected the VMC measurement class measurements as well. However, both the NFX and IMDX are behaving the same way as the previous firmwares. (i.e. default X-axis is the output frequency of the mixer.)

If your team can fix the SMC & VMC default x-axis behavior back to the prior firmware behavior, that would be greatly appreciated.

Thanks,
rok