传感器共享

嘿，嘿，
所以我用CapSense Express芯片很快一个原型+十段滑块的一个客户的项目。
它很有效，但是客户想要更长的滑动条。这已经是在最大长度不影响响应的线性度（这是音频电平，使线性度是重要的）但表达芯片不能做滑块双工。
我想如果我添加了第二个表达芯片，把两滑块一起，共享一个共同的传感器之间避免死区，这可能在很短的时间内做的伎俩，因为我还没有花时间去学习PSoC Creator在正常psoc4芯片创建相同的功能。
问题是，这是可能的吗？可以一段一个滑块连接两个CapSense Express芯片引脚？那会起作用吗？它会造成传感器读数的问题吗？疯狂的想法，但是我渴望实现这一尽快运行。
干杯
~D
                    
                    
               
                                                                                      以下为原文
                                            Hey there all,

So I used a Capsense Express chip to very quickly prototype a 2-button + 10-segment slider for a customer project.

It worked, but the client wants a longer slider. It is already at the maximum length without compromising the linearity of the response (It's for audio level, so that linearity is important) - but the Express chips can't do slider diplexing.

I thought if I added a second express chip and put two sliders together, sharing a common sensor in between to avoid a dead-zone, this might do the trick in a very short space of time, as I haven't had to take the time to learn PSOC creator to create the same functionality on a normal PSOC4 chip.

Question is - is that possible? Can one segment of a slider be connected to two Capsense Express chip pins? Would that even work? Would it create a problem with the sensor reading? Crazy idea but I'm running on the desire to implement this as fast as possible.

Cheers
~D