完善资料让更多小伙伴认识你，还能领取20积分哦， 立即完善>
3天内不再提示
电子发烧友论坛|
刚刚开始使用PSOC 4 BLE模块。我已经做了一个程序，并想发送到我的BLE模块，但当我去调试和GT程序在PSoC创建者4.2，它似乎找不到我的模块。我已经尝试通过BLE与CySMART软件连接，如快速入门指南中所示，只是简单地使用USB电缆，但似乎都不管用。请帮助！
以上来自于百度翻译 以下为原文 Just getting started with a used Psoc 4 ble module. I have made a program and would like to send it to my ble module, but when I go to Debug>Program in PSoc creator 4.2, it cant seem to find my module. I have tried connecting it through BLE with the cysmart dongle, like shown in the quick start guide, and just simply using a u*** cable, but neither seem to work. Please help! 
0
|
|
相关推荐
7个回答
|
|
|
你好，卢克，
请验证工具，您使用的是和你在项目选择的工具是相同的。如果没有请去“项目”在PSoC Creator点击“设备选择”，选择适当的试剂盒。 谢谢， 心理医生。 以上来自于百度翻译 以下为原文 Hello Luke, Please verify whether the kit which you are using and the kit you are selected in the project are same. If not please go to "Project" in PSoC Creator click on "Device Selector" and select proper kit. Thanks, PSYU. |
|
|
|
|
yu1004402274 发表于 2018-8-29 11:46 我在设备选择器中选择了CY8C4247LQI，因为这是我的模块所说的，但是当我去编程时，出现的唯一设备是不同的，似乎是软件狗。如果我试图把它编程，我会得到错误： “选定的调试目标”CYBL10162-56LQXI’与项目的选定设备“CY8C4248LQI-BL583'不兼容。” 谢谢你的帮助！ 以上来自于百度翻译 以下为原文 I have chosen the CY8C4247LQI in the device selector, as that is what it says on my module, but when I go to program it, the only device that appears is a different one, what seems to be the dongle. If I try to program it to that, I get the error: "The selected debug target 'CYBL10162-56LQXI' is not compatible with the project's selected device 'CY8C4248LQI-BL583'." Thanks for the help! |
|
|
|
|
tozhyan 发表于 2018-8-29 12:06 你好，卢克， 你不能在USB软件包CYBL10162-56LQXI中对项目进行编程。请验证您所拥有的模块和您在项目中选择的模块是相同的。 您的项目选择的设备是CY8C4248LQI-BL583D，但您的模块不同，请在设备选择器中选择相同的模块。 谢谢， 心理医生。 以上来自于百度翻译 以下为原文 Hello Luke, You can't program the project in USB Dongle CYBL10162-56LQXI. Please verify the module which you had and the module which you are selected in the project are same. Your project selected device is CY8C4248LQI-BL583 but your module is different please select the same module in the Device Selector. Thanks, PSYU. |
|
|
|
|
yu1004402274 发表于 2018-8-29 12:21 我知道我不能程序加密狗，在我印象中，我可以计划我的cy8c4248lqi-bl583芯片通过BLE加密狗。这是正确的，还是通过USB编程的唯一方法？ 以上来自于百度翻译 以下为原文 I realize that I cannot program the dongle, I was under the impression that I could program my CY8C4248LQI-BL583 chip via the dongle over BLE. Is this correct, or is the only way to program it via USB? |
|
|
|
|
tozhyan 发表于 2018-8-29 12:29 你好，卢克， 我们不能通过加密狗程序在BLE。我们计划我们的模块通过USB只。 谢谢， 心理医生。 以上来自于百度翻译 以下为原文 Hello Luke, We cannot program via dongle over BLE. We have to program our module via USB only. Thanks, PSYU. |
|
|
|
|
|
这就解释了为什么它不起作用！我想我的另一个问题可能是我的USB电缆只是电源，而不是数据电缆。谢谢你的帮助！ 以上来自于百度翻译 以下为原文 That would explain why its not working! I think my other problem may be that my USB cable is power only, and is not a data cable. Thanks for the help! |
|
|
|
|
|
编程进入模块后，只有实际的BLE通信发生。在此之前，它是不可能的因为我们要使固件BLE通信。 谢谢， 心理医生。 以上来自于百度翻译 以下为原文 After programming into the module only actual BLE communication takes place. Before that it is not possible because we are going to enable the BLE communication in the firmware. Thanks, PSYU. |
|
|
|
|
只有小组成员才能发言，加入小组>>
726个成员聚集在这个小组
加入小组1936 浏览 1 评论
1684 浏览 1 评论
3446 浏览 1 评论
请问可以直接使用来自FX2LP固件的端点向主机FIFO写入数据吗？
1605 浏览 6 评论
1404 浏览 1 评论
/6 
关注我们的微信
下载发烧友APP
电子发烧友观察
版权所有 © 湖南华秋数字科技有限公司
电子发烧友 （电路图） 湘公网安备 43011202000918 号 电信与信息服务业务经营许可证：合字B2-20210191
工商网监
湘ICP备2023018690号
1146
评论
淘帖
2465
