完善资料让更多小伙伴认识你,还能领取20积分哦, 立即完善>
电子发烧友论坛|
C66xx_0: Trouble Writing Memory Block at 0x400 on Page 0 of Length 0x200: (Error -1190 @ 0x400) Unable to access device memory. Verify that the memory address is in valid memory. If error persists, confirm configuration, power-cycle board, and/or try more reliable JTAG settings (e.g. lower TCLK). (Emulation package 5.0.838.0)
C66xx_0: GEL: File: D:tiprojecttest3GPIODebugGPIO.out: Load failed. C66xx_0: Power Failure on Target CPU C66xx_0: Failed to remove the debug state from the target before disconnecting. There may still be breakpoint op-codes embedded in program memory. It is recommended that you reset the emulator before you connect and reload your program before you continue debugging |
|
相关推荐
9 个讨论
|
|
|
先确认一下板子和仿真器的连接情况,是否能够正常连接。 然后再debug工程。 C66xx_0: Trouble Writing Memory Block at 0x400 on Page 0 of Length 0x200: (Error -1190 @ 0x400) Unable to access device memory. Verify that the memory address is in valid memory. 这个问题检查一下GEL文件中内存映射和你的板子是否匹配。 |
|
|
|
|
|
|
|
kingnet_52004 发表于 2018-8-3 09:25 不好意思啊,我是新手啊,GEL文件在哪呢,怎么工程文件夹里没有啊,有没有完整的资料描写工程的建立,以及相关的设置,包括仿真,谢谢 |
|
|
|
|
|
|
|
只有小组成员才能发言,加入小组>>
601 浏览 0 评论
1654 浏览 0 评论
2096 浏览 0 评论
为啥BQ7693003DBTR芯片在和BQ769X0盒子通讯时收不到信号?
1542 浏览 0 评论
DSP 28027F 开发板 XDS100v2调试探针诊断日志显示了 Error -150 (SC_ERR_FTDI_FAIL)如何解决
1386 浏览 0 评论
AT32F407在USART2 DMA发送数据时,接包接到了要发送的数据,程序还是处于等待传输完成的标识判断中,为什么?
1794浏览 29评论
2821浏览 23评论
请问下tpa3220实际测试引脚功能和官方资料不符,哪位大佬可以帮忙解答下
1748浏览 20评论
请教下关于TAS5825PEVM评估模块原理图中不太明白的地方,寻求答疑
1667浏览 14评论
两个TMP117传感器一个可以正常读取温度值,一个读取的值一直是0,为什么?
1681浏览 13评论
/9
小黑屋| 手机版| Archiver| 电子发烧友 ( 湘ICP备2023018690号 )
GMT+8, 2025-12-15 03:30 , Processed in 1.402838 second(s), Total 74, Slave 61 queries .
Powered by 电子发烧友网
© 2015 bbs.elecfans.com
关注我们的微信
下载发烧友APP
电子发烧友观察
版权所有 © 湖南华秋数字科技有限公司
电子发烧友 (电路图) 湘公网安备 43011202000918 号 电信与信息服务业务经营许可证:合字B2-20210191

淘帖
2463