完善资料让更多小伙伴认识你，还能领取20积分哦， 立即完善>
3天内不再提示
电子发烧友论坛
1703
|
使用nfs加载失败
VFS: Mounted root (nfs filesystem) on device 0:14. devtmpfs: mounted Freeing init memory: 200K INIT: version 2.86 booting Please wait: booting... Error opening /dev/fb0: No such file or directory Starting udev WARNING: -e needs -E or -F FATAL: Could not open /lib/modules/2.6.37/modules.dep.temp for writing: Permission denied Root filesystem already rw, not remounting Caching udev devnodes WARNING: -e needs -E or -F FATAL: Could not open /lib/modules/2.6.37/modules.dep.temp for writing: Permission denied /etc/init.d/rc: /etc/rcS.d/S37populate-volatile.sh: line 1: can't create /etc/volatile.cache: Permission denied /etc/init.d/rc: /etc/rcS.d/S37populate-volatile.sh: line 1: can't create /etc/volatile.cache: Permission denied /etc/init.d/rc: /etc/rcS.d/S37populate-volatile.sh: line 1: can't create /etc/volatile.cache: Permission denied /etc/init.d/rc: /etc/rcS.d/S37populate-volatile.sh: line 1: can't create /etc/volatile.cache: Permission denied /etc/init.d/rc: /etc/rcS.d/S37populate-volatile.sh: line 1: can't create /etc/volatile.cache: Permission denied /etc/init.d/rc: /etc/rcS.d/S37populate-volatile.sh: line 1: can't create /etc/volatile.cache: Permission denied /etc/init.d/rc: /etc/rcS.d/S37populate-volatile.sh: line 1: can't create /etc/volatile.cache: Permission denied /etc/init.d/rc: /etc/rcS.d/S37populate-volatile.sh: line 1: can't create /etc/volatile.cache: Permission denied /etc/init.d/rc: /etc/rcS.d/S37populate-volatile.sh: line 1: can't create /etc/volatile.cache: Permission denied /etc/init.d/rc: /etc/rcS.d/S37populate-volatile.sh: line 1: can't create /etc/volatile.cache: Permission denied /etc/init.d/rc: /etc/rcS.d/S37populate-volatile.sh: line 1: can't create /etc/volatile.cache: Permission denied /etc/init.d/rc: /etc/rcS.d/S37populate-volatile.sh: line 1: can't create /etc/volatile.cache: Permission denied ALSA: Restoring mixer settings... /usr/***in/alsactl: load_state:1625: No soundcards found... Collected errors: * opkg_conf_load: Could not create lock file /usr/lib/opkg/lock: Permission denied. rm: cannot remove '/etc/rcS.d/S40configure': Permission denied NOT configuring network interfaces: / is an NFS mount rm: cannot remove '/tmp': Permission denied hwclock: can't open '/dev/misc/rtc': No such file or directory Thu Nov 10 21:26:00 UTC 2011 hwclock: can't open '/dev/misc/rtc': No such file or directory /etc/init.d/rc: /etc/rcS.d/S99finish.sh: line 5: 
0
|
|
相关推荐
2个回答
|
|
|
将NFS的配置文件改为
/nfsroot *(rw,no_root_squash,no_all_squash,sync) 错误变成下面的样子 看不到matrix-ui界面 VFS: Mounted root (nfs filesystem) on device 0:14. devtmpfs: mounted Freeing init memory: 200K INIT: version 2.86 booting Error opening /dev/fb0: No such file or directory Please wait: booting... Starting udev udevd (71): /proc/71/oom_adj is deprecated, please use /proc/71/oom_score_adj instead. Root filesystem already rw, not remounting Caching udev devnodes NET: Registered protocol family 10 ALSA: Restoring mixer settings... No state is present for card EVM Found hardware: "" "" "" "" "" Hardware is initialized using a generic method No state is present for card EVM NOT configuring network interfaces: / is an NFS mount Thu Nov 10 21:26:00 UTC 2011 INIT: Entering runlevel: 5 Loading HDVICP2 Firmware DM816X prcm_config_app version: 2.0.0.1 Doing PRCM settings... PRCM for IVHD0 is in Progress, Please wait..... BW Phy Addr : 0x48180600 Data : 0x00000002 AW Phy Addr : 0x48180600 Data : 0x00000002 Phy Addr : 0x48180c04 Data : 0x00000037 BW Phy Addr : 0x48180620 Data : 0x00070000 AW Phy Addr : 0x48180620 Data : 0x00070002 BW Phy Addr : 0x48180624 Data : 0x00030000 AW Phy Addr : 0x48180624 Data : 0x00010002 Phy Addr : 0x48180600 Data : 0x00000102 BW Phy Addr : 0x48180c10 Data : 0x00000007 AW Phy Addr : 0x48180c10 Data : 0x00000003 Phy Addr : 0x48180c14 Data : 0x00000004 BW Phy Addr : 0x58088000 Data : 0x14bd37d1 AW Phy Addr : 0x58088000 Data : 0xeafffffe BW Phy Addr : 0x58098000 Data : 0x5285668e AW Phy Addr : 0x58098000 Data : 0xeafffffe BW Phy Addr : 0x48180c10 Data : 0x00000003 AW Phy Addr : 0x48180c10 Data : 0x00000000 Phy Addr : 0x48180c14 Data : 0x00000007 PRCM for IVHD0 is Done Successfully PRCM for IVHD1 is in Progress, Please wait..... BW Phy Addr : 0x48180700 Data : 0x00000002 AW Phy Addr : 0x48180700 Data : 0x00000002 Phy Addr : 0x48180d04 Data : 0x00000037 BW Phy Addr : 0x48180720 Data : 0x00070000 AW Phy Addr : 0x48180720 Data : 0x00050002 BW Phy Addr : 0x48180724 Data : 0x00030000 AW Phy Addr : 0x48180724 Data : 0x00010002 Phy Addr : 0x48180700 Data : 0x00000102 BW Phy Addr : 0x48180d10 Data : 0x00000007 AW Phy Addr : 0x48180d10 Data : 0x00000003 Phy Addr : 0x48180d14 Data : 0x00000004 BW Phy Addr : 0x5a088000 Data : 0x8212a201 AW Phy Addr : 0x5a088000 Data : 0xeafffffe BW Phy Addr : 0x5a098000 Data : 0x1beb1c90 AW Phy Addr : 0x5a098000 Data : 0xeafffffe BW Phy Addr : 0x48180d10 Data : 0x00000003 AW Phy Addr : 0x48180d10 Data : 0x00000000 Phy Addr : 0x48180d14 Data : 0x00000007 PRCM for IVHD1 is Done Successfully PRCM for IVHD2 is in Progress, Please wait..... BW Phy Addr : 0x48180800 Data : 0x00000002 AW Phy Addr : 0x48180800 Data : 0x00000002 Phy Addr : 0x48180e04 Data : 0x00000037 BW Phy Addr : 0x48180820 Data : 0x00070000 AW Phy Addr : 0x48180820 Data : 0x00050002 BW Phy Addr : 0x48180824 Data : 0x00030000 AW Phy Addr : 0x48180824 Data : 0x00010002 Phy Addr : 0x48180800 Data : 0x00000102 BW Phy Addr : 0x48180e10 Data : 0x00000007 AW Phy Addr : 0x48180e10 Data : 0x00000003 Phy Addr : 0x48180e14 Data : 0x00000004 BW Phy Addr : 0x53088000 Data : 0x7ea799f5 AW Phy Addr : 0x53088000 Data : 0xeafffffe BW Phy Addr : 0x53098000 Data : 0x8bae73bf AW Phy Addr : 0x53098000 Data : 0xeafffffe BW Phy Addr : 0x48180e10 Data : 0x00000003 AW Phy Addr : 0x48180e10 Data : 0x00000000 Phy Addr : 0x48180e14 Data : 0x00000007 PRCM for IVHD2 is Done Successfully PRCM Initialization completed SysLink version : 2.00.04.83 SysLink module created on Date:Nov 10 2011 Time:19:41:10 FIRMWARE: Memory map bin file not passed Usage : firmware_loader FIRMWARE: Default memory configuration is used MemCfg: DCMM (Dynamically Configurable Memory Map) Version : 2.1.1.1 FIRMWARE: Memory Configuration status : In Progress FIRMWARE: 1 start Successful Loading HDVPSS Firmware FIRMWARE: Memory map bin file not passed Usage : firmware_loader FIRMWARE: Default memory configuration is used MemCfg: DCMM (Dynamically Configurable Memory Map) Version : 2.1.1.1 FIRMWARE: Memory Configuration status : In Progress FIRMWARE: 2 start Successful notify_shm_drv_sendevent failed! status = 0xfffffff0 notify_send_event failed! status = 0xfffffff0 notify_shm_drv_sendevent failed! status = 0xfffffff0 notify_send_event failed! status = 0xfffffff0 notify_shm_drv_sendevent failed! status = 0xfffffff0 notify_send_event failed! status = 0xfffffff0 notify_shm_drv_sendevent failed! status = 0xfffffff0 notify_send_event failed! status = 0xfffffff0 notify_shm_drv_sendevent failed! status = 0xfffffff0 notify_send_event failed! status = 0xfffffff0 notify_shm_drv_sendevent failed! status = 0xfffffff0 notify_send_event failed! status = 0xfffffff0 notify_shm_drv_sendevent failed! status = 0xfffffff0 notify_send_event failed! status = 0xfffffff0 notify_shm_drv_sendevent failed! status = 0xfffffff0 notify_send_event failed! status = 0xfffffff0 notify_shm_drv_sendevent failed! status = 0xfffffff0 notify_send_event failed! status = 0xfffffff0 notify_shm_drv_sendevent failed! status = 0xfffffff0 notify_shm_drv_sendevent failed! status = 0xfffffff0 notify_send_event failed! status = 0xfffffff0 notify_shm_drv_sendevent failed! status = 0xfffffff0 notify_send_event failed! status = 0xfffffff0 notify_shm_drv_sendevent failed! status = 0xfffffff0 notify_send_event failed! status = 0xfffffff0 notify_shm_drv_sendevent failed! status = 0xfffffff0 notify_send_event failed! status = 0xfffffff0 notify_shm_drv_sendevent failed! status = 0xfffffff0 notify_send_event failed! status = 0xfffffff0 notify_shm_drv_sendevent failed! status = 0xfffffff0 notify_send_event failed! status = 0xfffffff0 notify_shm_drv_sendevent failed! status = 0xfffffff0 notify_send_event failed! status = 0xfffffff0 notify_shm_drv_sendevent failed! status = 0xfffffff0 notify_send_event failed! status = 0xfffffff0 notify_shm_drv_sendevent failed! status = 0xfffffff0 notify_send_event failed! status = 0xfffffff0 VPSS_CORE : Failed to init fvid2 interface, vpss: probe of vpss failed with error -22 VPSS_CORE : failed to register ti81xx-vpss driver FATAL: Error inserting omaplfb (/lib/modules/2.6.37/kernel/drivers/gpu/pvr/omaplfb.ko): No such device /dev/mem opened. Memory mapped at address 0x4009f000. Read at address 0x48180F04 (0x4009ff04): 0x00000001 Write at address 0x48180F04 (0x4009ff04): 0x00000000, readback 0x00000000 /dev/mem opened. Memory mapped at address 0x400ba000. Read at address 0x48180900 (0x400ba900): 0x00000102 Write at address 0x48180900 (0x400ba900): 0x00000002, readback 0x00000002 /dev/mem opened. Memory mapped at address 0x40267000. Read at address 0x48180920 (0x40267920): 0x00040002 Write at address 0x48180920 (0x40267920): 0x00000002, readback 0x00000002 Starting Matrix GUI application. _____ _____ _ _ | _ |___ ___ ___ ___ | _ |___ ___ |_|___ ___| |_ | | _| .'| . | . | | __| _| . | | | -_| _| _| |__|__|_| |__,|_ |___| |__| |_| |___|_| |___|___|_| |___| |___| Arago Project http://arago-project.org dm816x-evm ttyO2 Arago 2011.09 dm816x-evm ttyO2 dm816x-evm login: root root@dm816x-evm:~# ls root@dm816x-evm:~# ls / bin etc linuxrc opt srv usr boot home media proc sys var dev lib mnt ***in tmp root@dm816x-evm:~# cd /dev root@dm816x-evm:/dev# ls bc_cat syslinkipc_NameServer bccat0 syslinkipc_Notify block syslinkipc_Osal bus syslinkipc_ProcMgr char syslinkipc_RingIO console syslinkipc_RingIOShm cpu_dma_latency syslinkipc_SharedRegion full syslinkipc_SyslinkMemMgr i2c-1 tty i2c-2 tty0 initctl tty1 input tty10 kmem tty11 kmsg tty12 log tty13 loop0 tty14 loop1 tty15 loop2 tty16 loop3 tty17 loop4 tty18 loop5 tty19 loop6 tty2 loop7 tty20 mem tty21 mtd0 tty22 mtd0ro tty23 mtd1 tty24 mtd1ro tty25 mtd2 tty26 mtd2ro tty27 mtd3 tty28 mtd3ro tty29 mtd4 tty3 mtd4ro tty30 mtd5 tty31 mtd5ro tty32 mtd6 tty33 mtd6ro tty34 mtd7 tty35 mtd7ro tty36 mtd8 tty37 mtd8ro tty38 mtdblock0 tty39 mtdblock1 tty4 mtdblock2 tty40 mtdblock3 tty41 mtdblock4 tty42 mtdblock5 tty43 mtdblock6 tty44 mtdblock7 tty45 mtdblock8 tty46 network_latency tty47 network_throughput tty48 null tty49 port tty5 ptmx tty50 pts tty51 pvrsrvkm tty52 ram0 tty53 ram1 tty54 ram10 tty55 ram11 tty56 ram12 tty57 ram13 tty58 ram14 tty59 ram15 tty6 ram2 tty60 ram3 tty61 ram4 tty62 ram5 tty63 ram6 tty7 ram7 tty8 ram8 tty9 ram9 ttyO0 random ttyO1 rtc ttyO2 rtc0 ttyS0 shm ttyS1 snd ttyS2 syslinkipc_ClientNotifyMgr ttyS3 syslinkipc_FrameQ udev_network_queue syslinkipc_FrameQBufMgr urandom syslinkipc_GateMP vcs syslinkipc_HeapBufMP vcs1 syslinkipc_HeapMemMP vcsa syslinkipc_Ipc vcsa1 syslinkipc_ListMP vga_arbiter syslinkipc_MessageQ watchdog syslinkipc_MultiProc zero root@dm816x-evm:/dev# root@dm816x-evm:/dev# ls fb0 -al ls: fb0: No such file or directory root@dm816x-evm:/dev# ls fb* ls: fb*: No such file or directory root@dm816x-evm:/dev# ls bc_cat syslinkipc_NameServer bccat0 syslinkipc_Notify block syslinkipc_Osal bus syslinkipc_ProcMgr char syslinkipc_RingIO console syslinkipc_RingIOShm cpu_dma_latency syslinkipc_SharedRegion full syslinkipc_SyslinkMemMgr i2c-1 tty i2c-2 tty0 initctl tty1 input tty10 kmem tty11 kmsg tty12 log tty13 loop0 tty14 loop1 tty15 loop2 tty16 loop3 tty17 loop4 tty18 loop5 tty19 loop6 tty2 loop7 tty20 mem tty21 mtd0 tty22 mtd0ro tty23 mtd1 tty24 mtd1ro tty25 mtd2 tty26 mtd2ro tty27 mtd3 tty28 mtd3ro tty29 mtd4 tty3 mtd4ro tty30 mtd5 tty31 mtd5ro tty32 mtd6 tty33 mtd6ro tty34 mtd7 tty35 mtd7ro tty36 mtd8 tty37 mtd8ro tty38 mtdblock0 tty39 mtdblock1 tty4 mtdblock2 tty40 mtdblock3 tty41 mtdblock4 tty42 mtdblock5 tty43 mtdblock6 tty44 mtdblock7 tty45 mtdblock8 tty46 network_latency tty47 network_throughput tty48 null tty49 port tty5 ptmx tty50 pts tty51 pvrsrvkm tty52 ram0 tty53 ram1 tty54 ram10 tty55 ram11 tty56 ram12 tty57 ram13 tty58 ram14 tty59 ram15 tty6 ram2 tty60 ram3 tty61 ram4 tty62 ram5 tty63 ram6 tty7 ram7 tty8 ram8 tty9 ram9 ttyO0 random ttyO1 rtc ttyO2 rtc0 ttyS0 shm ttyS1 snd ttyS2 syslinkipc_ClientNotifyMgr ttyS3 syslinkipc_FrameQ udev_network_queue syslinkipc_FrameQBufMgr urandom syslinkipc_GateMP vcs syslinkipc_HeapBufMP vcs1 syslinkipc_HeapMemMP vcsa syslinkipc_Ipc vcsa1 syslinkipc_ListMP vga_arbiter syslinkipc_MessageQ watchdog syslinkipc_MultiProc zero |
|
|
|
|
|
在E2E得到解决了 需要修改启动参数 notifyk.vpssm3_sva=0xBF900000 |
|
|
|
|
只有小组成员才能发言，加入小组>>
354 浏览 1 评论
547 浏览 2 评论
NA555DR VCC最低电压需要在5V供电，为什么用3.3V供电搭了个单稳态触发器也使用正常?
793 浏览 3 评论
MSP430F249TPMR出现高温存储后失效了的情况，怎么解决？
664 浏览 1 评论
对于多级放大电路板，在PCB布局中，电源摆放的位置应该注意什么？
1141 浏览 1 评论
AT32F407在USART2 DMA发送数据时，接包接到了要发送的数据，程序还是处于等待传输完成的标识判断中，为什么？
88浏览 29评论
339浏览 23评论
请问下tpa3220实际测试引脚功能和官方资料不符，哪位大佬可以帮忙解答下
263浏览 20评论
请教下关于TAS5825PEVM评估模块原理图中不太明白的地方，寻求答疑
215浏览 14评论
两个TMP117传感器一个可以正常读取温度值，一个读取的值一直是0，为什么？
69浏览 13评论
/7 
关注我们的微信
下载发烧友APP
电子发烧友观察
版权所有 © 湖南华秋数字科技有限公司
电子发烧友 （电路图） 湘公网安备 43011202000918 号 电信与信息服务业务经营许可证：合字B2-20210191
工商网监
湘ICP备2023018690号
评论
淘帖
814
