[问答]

Programming PSoC4 with Miniprog3

2017-9-1 16:13:03 5501

0 Dear , I use PSoC Programmer 3.26.0 to program PSoC4 , it is successful. but when I PPCLI.exe to Programming,when I use PSoC4_EraseAll, it will show error as follow: >PSoC4_EraseAll E SWD respond packet contains Failed status! PSoC4_EraseAll returned 80004005 80004005 OK 0 psoc4 programming_pass.png (567.19 KB, 下载次数: 7) eraseall.png (107.09 KB, 下载次数: 4) PPCLI_ERROR.txt.zip 506 Bytes , 下载次数: 15
2017-9-1 16:13:03　　 1 评论淘帖0 举报相关推荐 • 用Miniprog3编程PSoC4显示错误 1280 • CY8CKIT-002 PSoC®MiniProg3 PSoC 3/5编程及调试工具 56 • MiniProg3无法识别，无法更新PSoC Programmer 3545 • PSoC 3 Device Programming Specifications 15 • CYPD7191-40LDXS是否同时支持Miniprog3和Miniprog4？ 175 • PSoC Creator4.2使用MiniProg3烧录PSoC6时，芯片不能外部供电吗？ 626 • miniprog3不能调试的原因？ 219 • 如何使用miniprog3设置气象站 2458 • Miniprog3 revA突然失败了 1641 • miniprog3突然失败了 1879 1 条评论 btlook 2021-9-27 15:08 the same issue as you, do you have solution for this? 赞回复举报 1 个讨论

0 got the solution: OpenPort MiniProg3/1707CA000B2F "C:/Program Files (x86)/Cypress/Programmer" HEX_ReadFile "D:\Finis Test Sequence\Finis_Firmware\00007632B_CleanSwitch-Radar_V2_SVN273.hex" SetAcquireMode “Reset” SetProtocol 8 SetProtocolClock 224 SetProtocolConnector 1 DAP_Acquire PSoC4_WriteProtection 1 DAP_ReleaseChip ClosePort

2021-9-27 16:04:56 评论举报 1^# btlook