如何跳线将液晶显示屏图像旋转180度?

0

如何跳线将液晶显示屏图像旋转180度?接线端口如下:
 

5.1 TFT LCD MODULE

Pin         Name                       Description

1        RXO0-         Negative LVDS differential data input. Channel O0 (odd)

2        RXO0+        Positive LVDS differential data input. Channel O0 (odd)

3        RXO1-         Negative LVDS differential data input. Channel O1 (odd)

4        RXO1+        Positive LVDS differential data input. Channel O1 (odd)

5        RXO2-        Negative LVDS differential data input. Channel O2 (odd)

6        RXO2+        Positive LVDS differential data input. Channel O2 (odd)

7        GND          Ground

8        RXOC-        Negative LVDS differential clock input. (odd)

9        RXOC+       Positive LVDS differential clock input. (odd)

10       RXO3-        Negative LVDS differential data input. Channel O3(odd)

11       RXO3+       Positive LVDS differential data input. Channel O3 (odd)

12       RXE0-        Negative LVDS differential data input. Channel E0 (even)

13       RXE0+       Positive LVDS differential data input. Channel E0 (even)

14       GND         Ground

15       RXE1-        Negative LVDS differential data input. Channel E1 (even)

16       RXE1+       Positive LVDS differential data input. Channel E1 (even)

17       GND         Ground

18       RXE2-        Negative LVDS differential data input. Channel E2 (even)

19       RXE2+        Positive LVDS differential data input. Channel E2 (even)

20       RXEC-        Negative LVDS differential clock input. (even)

21       RXEC+        Positive LVDS differential clock input. (even)

22       RXE3-         Negative LVDS differential data input. Channel E3 (even)

23       RXE3+        Positive LVDS differential data input. Channel E3 (even)

24       GND          Ground

25       NC            Not connection, should open.

26       VCOM        VCOM Control, should open.

27       AGMODE      AGMODE should be tied to ground or open.

28      VCC +5.0V      power supply

29      VCC +5.0V      power supply

30      VCC +5.0V      power supply

Note (1) Connector Part No.: 093G30-B0001A(STARCONN) or FI-X30SSL-HF(JAE) or EQUIVALENT.

Note (2) Mating Connector Part No.:FI-X30H ; FI-X30C* ; FI-X30M* ; FI-X30HL(-T),FI-X30C*L(-T) [JAE]

Note (3) The first pixel is odd.

Note (4) Input signal of even and odd clock should be the same timing.

0