求助，error flash espcom主板变砖了吗？

我已经在我的 lolin esp8266 D1 mini pro 上使用了不同的草图，突然变得不可能了。
环境：在完全重新安装之前和之后，我使用 IDE 或 Arduino Create 网络应用程序有相同的 essor 消息。在 /dev 端口上检测到电路板，但无法上传。我试过换数据线。
您可以看到错误消息
Is the board bricked ?
任何想法 ？
谢谢大家
代码：全选[...]
runtime.tools.serial-discovery.path=/home/builder/.arduino15/packages/builtin/tools/serial-discovery/1.1.0 -libraries /tmp/533186290/custom -libraries /tmp/533186290/pinned /tmp/533186290/Blink

Sketch uses 258580 bytes (24%) of program storage space. Maximum is 1044464 bytes.

Global variables use 26696 bytes (32%) of dynamic memory, leaving 55224 bytes for local variables. Maximum is 81920 bytes.

Upload started

Programming with: Serial

Flashing with command:/Users/thomas/.arduino-create/esp8266/esptool/2.5.0-3-20ed2b9/esptool -vv -cd nodemcu -cb 921600 -cp /dev/cu.usbserial-1420 -ca 0x00000 -cf /var/folders/8t/bfs2gtl52wj78bxgtl5f51pm0000gn/T/arduino-create-agent394983170/Blink.bin

esptool v0.4.13-1-gf80ae31 - (c) 2014 Ch. Klippel <ck@atelier-klippel.de>

setting board to nodemcu

setting baudrate from 115200 to 921600

setting port from /dev/tty.usbserial to /dev/cu.usbserial-1420

setting address from 0x00000000 to 0x00000000

espcomm_upload_file

espcomm_upload_mem

opening port /dev/cu.usbserial-1420 at 921600

tcgetattr

warning: serialport_set_baudrate: baud rate 921600 may not work

tcsetattr

serial open

opening bootloader

resetting board

trying to connect

espcomm_send_command: sending command header

espcomm_send_command: sending command payload

trying to connect

espcomm_send_command: sending command header

espcomm_send_command: sending command payload

espcomm_send_command: receiving 2 bytes of data

espcomm_send_command: receiving 2 bytes of data

espcomm_send_command: receiving 2 bytes of data

espcomm_send_command: receiving 2 bytes of data

espcomm_send_command: receiving 2 bytes of data

espcomm_send_command: receiving 2 bytes of data

espcomm_send_command: receiving 2 bytes of data

espcomm_send_command: receiving 2 bytes of data

Uploading 262720 bytes from /var/folders/8t/bfs2gtl52wj78bxgtl5f51pm0000gn/T/arduino-create-agent394983170/Blink.bin to flash at 0x00000000

erasing flash

size: 040240 address: 000000

first_sector_index: 0

total_sector_count: 65

head_sector_count: 16

adjusted_sector_count: 49

erase_size: 031000

espcomm_send_command: sending command header

espcomm_send_command: sending command payload

setting timeout 15000

setting timeout 1000

warning: espcomm_send_command: didn't receive command response

warning: espcomm_send_command(FLASH_DOWNLOAD_BEGIN) failed

closing bootloader

error: espcomm_upload_mem failed