[问答]

ESP32 DEBUG启动后立刻就复位了怎么解决？

问答对人有帮助，内容完整，我也想知道答案 0 下面是报错信息： Programming Started Info : [esp32.cpu0] Target halted, PC=0x40092612, debug_reason=00000001 Info : [esp32.cpu0] Target halted, PC=0x40092612, debug_reason=00000001 Info : PROF: Erased 28672 bytes in 322.999 ms Info : PROF: Data transferred in 101.001 ms @ 277.225 KB/s Info : [esp32.cpu0] Target halted, PC=0x40092612, debug_reason=00000001 Info : PROF: Wrote 28672 bytes in 281 ms (data transfer time included) Programming Finished in 1059 ms Verify Started Info : [esp32.cpu0] Target halted, PC=0x40092612, debug_reason=00000001 Info : PROF: Flash verified in 45 ms Verify OK Flashing done for bootloader/bootloader.bin in 1118 ms Flashing G:/Test/ESP32/EclipseIDE_Pj/blink2/build/blink2.bin at 0x10000 Info : JTAG tap: esp32.cpu0 tap/device found: 0x120034e5 (mfg: 0x272 (Tensilica), part: 0x2003, ver: 0x1) Info : JTAG tap: esp32.cpu1 tap/device found: 0x120034e5 (mfg: 0x272 (Tensilica), part: 0x2003, ver: 0x1) Info : [esp32.cpu0] requesting target halt and executing a soft reset Info : [esp32.cpu0] Debug controller was reset. Info : [esp32.cpu0] Core was reset. Info : [esp32.cpu0] Target halted, PC=0x500000CF, debug_reason=00000000 Info : [esp32.cpu0] Reset cause (3) - (Software core reset) Info : [esp32.cpu1] requesting target halt and executing a soft reset Info : [esp32.cpu0] Core was reset. Info : [esp32.cpu0] Target halted, PC=0x40000400, debug_reason=00000000 Info : [esp32.cpu1] Debug controller was reset. Info : [esp32.cpu1] Core was reset. Info : [esp32.cpu1] Target halted, PC=0x40000400, debug_reason=00000000 Info : [esp32.cpu1] Reset cause (14) - (CPU1 reset by CPU0) Info : [esp32.cpu0] Reset cause (3) - (Software core reset) Programming Started Info : [esp32.cpu0] Target halted, PC=0x40092612, debug_reason=00000001 Info : [esp32.cpu0] Target halted, PC=0x40092612, debug_reason=00000001 Info : PROF: Erased 200704 bytes in 1085 ms Info : PROF: Data transferred in 707.997 ms @ 276.837 KB/s Info : [esp32.cpu0] Target halted, PC=0x40092612, debug_reason=00000001 Info : PROF: Wrote 200704 bytes in 966.999 ms (data transfer time included) Programming Finished in 2251 ms Verify Started Info : [esp32.cpu0] Target halted, PC=0x40092612, debug_reason=00000001 Info : PROF: Flash verified in 140 ms Verify OK Flashing done for blink2.bin in 2406 ms Flashing G:/Test/ESP32/EclipseIDE_Pj/blink2/build/partition_table/partition-table.bin at 0x8000 Info : JTAG tap: esp32.cpu0 tap/device found: 0x120034e5 (mfg: 0x272 (Tensilica), part: 0x2003, ver: 0x1) Info : JTAG tap: esp32.cpu1 tap/device found: 0x120034e5 (mfg: 0x272 (Tensilica), part: 0x2003, ver: 0x1) Info : [esp32.cpu0] requesting target halt and executing a soft reset Info : [esp32.cpu0] Debug controller was reset. Info : [esp32.cpu0] Core was reset. Info : [esp32.cpu0] Target halted, PC=0x500000CF, debug_reason=00000000 Info : [esp32.cpu0] Reset cause (3) - (Software core reset) Info : [esp32.cpu1] requesting target halt and executing a soft reset Info : [esp32.cpu0] Core was reset. Info : [esp32.cpu0] Target halted, PC=0x40000400, debug_reason=00000000 Info : [esp32.cpu1] Debug controller was reset. Info : [esp32.cpu1] Core was reset. Info : [esp32.cpu1] Target halted, PC=0x40000400, debug_reason=00000000 Info : [esp32.cpu1] Reset cause (14) - (CPU1 reset by CPU0) Info : [esp32.cpu0] Reset cause (3) - (Software core reset) Programming Started Info : [esp32.cpu0] Target halted, PC=0x40092612, debug_reason=00000001 Info : [esp32.cpu0] Target halted, PC=0x40092612, debug_reason=00000001 Info : PROF: Erased 4096 bytes in 97.001 ms Info : PROF: Data transferred in 18.98 ms @ 210.748 KB/s Info : [esp32.cpu0] Target halted, PC=0x40092612, debug_reason=00000001 Info : PROF: Wrote 4096 bytes in 192.999 ms (data transfer time included) Programming Finished in 500 ms Verify Started Info : [esp32.cpu0] Target halted, PC=0x40092612, debug_reason=00000001 Info : PROF: Flash verified in 36 ms Verify OK Flashing done for partition_table/partition-table.bin in 550 ms Total programming time 4083 ms Resetting Target Info : JTAG tap: esp32.cpu0 tap/device found: 0x120034e5 (mfg: 0x272 (Tensilica), part: 0x2003, ver: 0x1) Info : JTAG tap: esp32.cpu1 tap/device found: 0x120034e5 (mfg: 0x272 (Tensilica), part: 0x2003, ver: 0x1) Info : [esp32.cpu0] requesting target halt and executing a soft reset Info : [esp32.cpu0] Debug controller was reset. Info : [esp32.cpu0] Core was reset. Info : [esp32.cpu0] Target halted, PC=0x500000CF, debug_reason=00000000 Info : [esp32.cpu0] Reset cause (3) - (Software core reset) Info : [esp32.cpu1] requesting target halt and executing a soft reset Info : [esp32.cpu0] Core was reset. Info : [esp32.cpu1] Debug controller was reset. Info : [esp32.cpu1] Core was reset. Info : [esp32.cpu0] Target halted, PC=0x4000921F, debug_reason=00000000 Info : [esp32.cpu0] Reset cause (3) - (Software core reset) Info : [esp32.cpu1] Target halted, PC=0x400076E2, debug_reason=00000000 Info : [esp32.cpu1] Reset cause (14) - (CPU1 reset by CPU0) shutdown command invoked 0
2023-3-3 08:08:58　　评论淘帖0 邀请回答您可以邀请以下用户，快速回答问题 × wang21cj 该类别下有 38 个回答。邀请回答 hgimtk 该类别下有 38 个回答。邀请回答新星之火12138 该类别下有 33 个回答。邀请回答 zyh34997 该类别下有 32 个回答。邀请回答就好国dd 该类别下有 32 个回答。邀请回答 chm5 该类别下有 32 个回答。邀请回答 heks 该类别下有 31 个回答。邀请回答 zaichenxi 该类别下有 31 个回答。邀请回答 flowerddd 该类别下有 29 个回答。邀请回答 muwersddg 该类别下有 29 个回答。邀请回答四川赵赵该类别下有 29 个回答。邀请回答星星公交站该类别下有 28 个回答。邀请回答 vinww特烦恼该类别下有 28 个回答。邀请回答 caosurround 该类别下有 28 个回答。邀请回答 gvjhvbc 该类别下有 27 个回答。邀请回答安德森大该类别下有 27 个回答。邀请回答 xwgc888 该类别下有 27 个回答。邀请回答 lkjflksjfsa 该类别下有 27 个回答。邀请回答 h1654155143.8331 该类别下有 27 个回答。邀请回答 723662364d 该类别下有 27 个回答。邀请回答举报李英相关推荐 • ESP32 DEBUG启动后立刻就复位了的原因？ 251 • ESP32 DEBUG时启动后立刻就复位了，为什么？ 174 • 为什么ESP32会引起断电探测器触发复位呢 6715 • ESP32-S2-SOLO-U-N4仅在第二次上电时启动的原因？ 260 • 请问ESP32如何触发软件复位？ 223 • 请问ESP32如何触发软件复位？ 152 • ESP32在按下复位按钮之前不启动是怎么回事？ 569 • esp32s3的启动时间远大于esp32，为什么？ 172 • ESP32 Rev 3内存分配差异是什么？ 252 • esp在释放复位按钮后将MTDO/GPIO40拉高是怎么回事？ 191