ESP32 DEBUG时启动后立刻就复位了，为什么？

下面是报错信息：

...
** Programming Started **
Info : [esp32.cpu0] Target halted, PC=0x40092612, debug_reason=00000001
Info : [esp32.cpu0] Target halted, PC=0x40092612, debug_reason=00000001
Info : PROF: Erased 28672 bytes in 322.999 ms
Info : PROF: Data transferred in 101.001 ms @ 277.225 KB/s
Info : [esp32.cpu0] Target halted, PC=0x40092612, debug_reason=00000001
Info : PROF: Wrote 28672 bytes in 281 ms (data transfer time included)
** Programming Finished in 1059 ms **
** Verify Started **
Info : [esp32.cpu0] Target halted, PC=0x40092612, debug_reason=00000001
Info : PROF: Flash verified in 45 ms
** Verify OK **
** Flashing done for bootloader/bootloader.bin in 1118 ms **
Flashing G:/Test/ESP32/EclipseIDE_Pj/blink2/build/blink2.bin at 0x10000
Info : JTAG tap: esp32.cpu0 tap/device found: 0x120034e5 (mfg: 0x272 (Tensilica), part: 0x2003, ver: 0x1)
Info : JTAG tap: esp32.cpu1 tap/device found: 0x120034e5 (mfg: 0x272 (Tensilica), part: 0x2003, ver: 0x1)
Info : [esp32.cpu0] requesting target halt and executing a soft reset
Info : [esp32.cpu0] Debug controller was reset.
Info : [esp32.cpu0] Core was reset.
Info : [esp32.cpu0] Target halted, PC=0x500000CF, debug_reason=00000000
Info : [esp32.cpu0] Reset cause (3) - (Software core reset)
Info : [esp32.cpu1] requesting target halt and executing a soft reset
Info : [esp32.cpu0] Core was reset.
Info : [esp32.cpu0] Target halted, PC=0x40000400, debug_reason=00000000
Info : [esp32.cpu1] Debug controller was reset.
Info : [esp32.cpu1] Core was reset.
Info : [esp32.cpu1] Target halted, PC=0x40000400, debug_reason=00000000
Info : [esp32.cpu1] Reset cause (14) - (CPU1 reset by CPU0)
Info : [esp32.cpu0] Reset cause (3) - (Software core reset)
** Programming Started **
Info : [esp32.cpu0] Target halted, PC=0x40092612, debug_reason=00000001
Info : [esp32.cpu0] Target halted, PC=0x40092612, debug_reason=00000001
Info : PROF: Erased 200704 bytes in 1085 ms
Info : PROF: Data transferred in 707.997 ms @ 276.837 KB/s
Info : [esp32.cpu0] Target halted, PC=0x40092612, debug_reason=00000001
Info : PROF: Wrote 200704 bytes in 966.999 ms (data transfer time included)
** Programming Finished in 2251 ms **
** Verify Started **
Info : [esp32.cpu0] Target halted, PC=0x40092612, debug_reason=00000001
Info : PROF: Flash verified in 140 ms
** Verify OK **
** Flashing done for blink2.bin in 2406 ms **
Flashing G:/Test/ESP32/EclipseIDE_Pj/blink2/build/partition_table/partition-table.bin at 0x8000
Info : JTAG tap: esp32.cpu0 tap/device found: 0x120034e5 (mfg: 0x272 (Tensilica), part: 0x2003, ver: 0x1)
Info : JTAG tap: esp32.cpu1 tap/device found: 0x120034e5 (mfg: 0x272 (Tensilica), part: 0x2003, ver: 0x1)
Info : [esp32.cpu0] requesting target halt and executing a soft reset
Info : [esp32.cpu0] Debug controller was reset.
Info : [esp32.cpu0] Core was reset.
Info : [esp32.cpu0] Target halted, PC=0x500000CF, debug_reason=00000000
Info : [esp32.cpu0] Reset cause (3) - (Software core reset)
Info : [esp32.cpu1] requesting target halt and executing a soft reset
Info : [esp32.cpu0] Core was reset.
Info : [esp32.cpu0] Target halted, PC=0x40000400, debug_reason=00000000
Info : [esp32.cpu1] Debug controller was reset.
Info : [esp32.cpu1] Core was reset.
Info : [esp32.cpu1] Target halted, PC=0x40000400, debug_reason=00000000
Info : [esp32.cpu1] Reset cause (14) - (CPU1 reset by CPU0)
Info : [esp32.cpu0] Reset cause (3) - (Software core reset)
** Programming Started **
Info : [esp32.cpu0] Target halted, PC=0x40092612, debug_reason=00000001
Info : [esp32.cpu0] Target halted, PC=0x40092612, debug_reason=00000001
Info : PROF: Erased 4096 bytes in 97.001 ms
Info : PROF: Data transferred in 18.98 ms @ 210.748 KB/s
Info : [esp32.cpu0] Target halted, PC=0x40092612, debug_reason=00000001
Info : PROF: Wrote 4096 bytes in 192.999 ms (data transfer time included)
** Programming Finished in 500 ms **
** Verify Started **
Info : [esp32.cpu0] Target halted, PC=0x40092612, debug_reason=00000001
Info : PROF: Flash verified in 36 ms
** Verify OK **
** Flashing done for partition_table/partition-table.bin in 550 ms **
** Total programming time 4083 ms **
** Resetting Target **
Info : JTAG tap: esp32.cpu0 tap/device found: 0x120034e5 (mfg: 0x272 (Tensilica), part: 0x2003, ver: 0x1)
Info : JTAG tap: esp32.cpu1 tap/device found: 0x120034e5 (mfg: 0x272 (Tensilica), part: 0x2003, ver: 0x1)
Info : [esp32.cpu0] requesting target halt and executing a soft reset
Info : [esp32.cpu0] Debug controller was reset.
Info : [esp32.cpu0] Core was reset.
Info : [esp32.cpu0] Target halted, PC=0x500000CF, debug_reason=00000000
Info : [esp32.cpu0] Reset cause (3) - (Software core reset)
Info : [esp32.cpu1] requesting target halt and executing a soft reset
Info : [esp32.cpu0] Core was reset.
Info : [esp32.cpu1] Debug controller was reset.
Info : [esp32.cpu1] Core was reset.
Info : [esp32.cpu0] Target halted, PC=0x4000921F, debug_reason=00000000
Info : [esp32.cpu0] Reset cause (3) - (Software core reset)
Info : [esp32.cpu1] Target halted, PC=0x400076E2, debug_reason=00000000
Info : [esp32.cpu1] Reset cause (14) - (CPU1 reset by CPU0)
shutdown command invoked