有没有办法提高easyflash读取变量的速度呢

硬件环境：

STM32F407
SPI3
W25Q128
软件环境：

rtthread 4.0.5
easyflash 4.1.99
spi3 无DMA 模式

软件配置

FAL 配置：

#define FAL_PART_TABLE
{
/* {FAL_PART_MAGIC_WROD, "bootloader", "onchip_flash_16k", 0 , FLASH_SIZE_GRANULARITY_16K , 0}, /
/ {FAL_PART_MAGIC_WROD, "param", "onchip_flash_64k", 0 , FLASH_SIZE_GRANULARITY_64K , 0}, /
{FAL_PART_MAGIC_WROD, "app", "onchip_flash_128k", 0 , FLASH_SIZE_GRANULARITY_128K, 0},
{FAL_PART_MAGIC_WROD, "easyflash", SPI_FALSH_NAME, 0 , 1024 * 1024, 0},
{FAL_PART_MAGIC_WROD, "download", SPI_FALSH_NAME, 1024 * 1024 , 1024 * 1024, 0},
{FAL_PART_MAGIC_WROD, "filesystem", SPI_FALSH_NAME, 2048 * 1024 , 13 * 1024 * 1024, 0},
}
#endif / FAL_PART_HAS_TABLE_CFG */

easyflash 配置：

/* ENV area size. It's at least one empty sector for GC. So it's definition must more then or equal 2 flash sector size. /
//#define ENV_AREA_SIZE (EF_ERASE_MIN_SIZE * 128) / default is the double erase min size /
#define ENV_AREA_SIZE (EF_ERASE_MIN_SIZE * 64) / default is the double erase min size */
rtconfig.h

#define PKG_USING_EASYFLASH
#define PKG_EASYFLASH_ENV
#define PKG_EASYFLASH_ERASE_GRAN 4096
#define PKG_EASYFLASH_WRITE_GRAN_1BIT
#define PKG_EASYFLASH_WRITE_GRAN 1
#define PKG_EASYFLASH_START_ADDR 0
#define PKG_EASYFLASH_DEBUG
#define PKG_USING_EASYFLASH_LATEST_VERSION
#define PKG_EASYFLASH_VER_NUM 0x99999
#define RT_USING_SPI
#define RT_USING_SFUD
#define RT_SFUD_USING_SFDP
#define RT_SFUD_USING_FLASH_INFO_TABLE
#define RT_SFUD_SPI_MAX_HZ 50000000 //spi 挂载的时候速度

问题现象：

再系统开机的时候，需要读取大量的参数配置字。
每次读取使用 ef_get_env_blob 函数来读取。
开机后每个环境变量的读取时间大概是1S少一点点的时间。

读取日志：

[7703] I/app.public: Read meterType from flash ok,value:1, 1,1,1.
[8163] I/app.public: Read use3pAs1p from flash ok,value:0, 1,1,1.
[10461] I/app.public: Read ethDhcp from flash ok,value:1, 1,1,1.
[10700] I/app.public: Read ethIP from flash ok,value:33597632, 4,4,4.
[10939] I/app.public: Read ethMask from flash ok,value:16777215, 4,4,4.
[11180] I/app.public: Read ethGW from flash ok,value:16820416, 4,4,4.

问题是有没有办法来提高这个读取的速度？