请问我跟着做了nand erase root再烧写uImage启动一直停在那不动是怎么回事？

DA1341 audio driver initialized ALSA device list:   No soundcards found. TCP cubic registered NET: Registered protocol family 1 drivers/rtc/hctosys.c: unable to open rtc device (rtc0) end_request: I/O error, dev mtdblock3, sector 29440 UDF-fs: No VRS found yaffs: dev is 32505859 name is "mtdblock3" yaffs: passed flags "" yaffs: Attempting MTD mount on 31.3, "mtdblock3" yaffs: auto selecting yaffs2 block 116 is bad block 241 is bad block 568 is bad block 1011 is bad block 1056 is bad block 1336 is bad VFS: Mounted root (yaffs filesystem). Freeing init memory: 140K Warning: unable to open an initial console. Failed to execute /linuxrc.  Attempting defaults... Kernel panic - not syncing: No init found.  Try passing init= option to kernel.

待会我会发出一文档出来，里面有你的问题

好得  马上去查看

没有找到答案啊   不是相关的

我的也差不多，也是停在企鹅那里了，你解决了吗？我的信息是这样的，烧写的都是光盘里面的u-boot ，uImage和文件系统UDA1341 audio driver initialized
ALSA device list:
  No soundcards found.
TCP cubic registered
NET: Registered protocol family 1
drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
IP-Config: Complete:
      device=eth0, addr=192.168.1.105, mask=255.255.255.0, gw=192.168.1.1,
     host=192.168.1.105, domain=, nis-domain=(none),
     bootserver=192.168.1.110, rootserver=192.168.1.110, rootpath=
Looking up port of RPC 100003/2 on 192.168.1.110
rpcbind: server 192.168.1.110 not responding, timed out
Root-NFS: Unable to get nfsd port number from server, using default
Looking up port of RPC 100005/1 on 192.168.1.110
rpcbind: server 192.168.1.110 not responding, timed out
Root-NFS: Unable to get mountd port number from server, using default
mount: server 192.168.1.110 not responding, timed out
Root-NFS: Server returned error -5 while mounting /home/wgfxcu/work/share/nfs/fs_mini
VFS: Unable to mount root fs via NFS, trying floppy.
VFS: Cannot open root device "nfs" or unknown-block(2,0)
Please append a correct "root=" boot option; here are the available partitions:
1f00        256 mtdblock0 (driver?)
1f01        128 mtdblock1 (driver?)
1f02       2048 mtdblock2 (driver?)
1f03     259712 mtdblock3 (driver?)
Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(2,0)

我的问题同上面一样，怎知如何处理呀?过程如下
无论我由nor或nand改重绕u-ＢＯＯＴ後，用pc机的dnw 经u*** 烧uimage和fs_qtopia.yaffs2到开发板，都无法到qt画面(一直停留在企鹅画面，连LCD五点订位都没到)，错误讯息如下