哪里可以找到实现与ST25R3911B-DISCO的UART接口的文档？

我试图通过UART与ST25R3911B-DISCO板连接。


基本上我想向读卡器发送命令，然后通过提供的UART接收响应。我计划将ST25R3911B-DISCO板连接到外部MCU，因此希望使用UART作为两者之间的接口标准。


我正在努力寻找关于如何通过电路板UART实现这一目标的文档。哪里可以找出使用什么波特率？是否有特定模式，ST25R3911B-DISCO板必须通过UART进行通信才能工作？还有哪些命令可用，以及可以从电路板UART获得什么类型的响应。
任何文档，帮助或指导帮助将不胜感激。
我拥有的标签是随附的标准ST25TA64K
ST25R3911B-DISCO套件。

＃st25r3911b-disco＃i2c-and-uart＃ndef-st25ta64k



以下为原文




I am trying to interface with the ST25R3911B-DISCO board via UART.


Basically I want to send commands to the reader and then receive the response via the provided UART. I am planning on connecting the ST25R3911B-DISCO board to an external MCU and thus want to use UART as the interfacing standard between the two.


I am struggling to find documentation on on how this is possible via the boards UART. Where can one find out what baud rate to use? And Is there a specific mode in which the ST25R3911B-DISCO board must be in for communication via UART to work? Also what commands are available and what type of responses can be expected from the boards UART.
Any documentation, assistance or pointers to help would be greatly appreciated.
The tag I have is the stock standard ST25TA64K that came with the
ST25R3911B-DISCO kit.

#st25r3911b-disco #i2c-and-uart #ndef-st25ta64k