MPLAB X v3.30和3.35 dll初始化问题

您好，当我启动MPLAB X（3.30或3.35）时，它需要几秒钟到一分钟，直到它冻结，并且弹出一条消息：LoadLibrary失败，出错1114：Eine DLL-Initialisierungsroutine ist fehlgeschlagen（翻译：A DLL Initialisation routinailed）（参见图片）。有此问题。我删除并重新安装了两个版本-和（在我曾经的小时隙）我删除了所有项目，除了我现在正在工作的项目（一个XC8项目，以前工作得很好，有时可以在这个短时间隙内通过ICD3实际下载）。我如何获得更多关于“可能丢失或有缺陷的DLL”的信息。！！！提前感谢



      以下为原文

    Hi There,
when i start MPLAB X (either 3.30 or 3.35) it takes a few seconds to a Minute until it freezes and a Message pops up: LoadLibrary failed with error 1114: Eine DLL-Initialisierungsroutine ist fehlgeschlagen (translation: A DLL Initialisation routine failed) (see Picture).
MPLAB X 3.20 doesn't have this problem.
I removed and reinstalled both Versions - and (in the small Time Slot i had) i removed all Projects exept the one i'm currently working on (a XC8 project that previously works fine and sometimes may be actually downloaded via ICD3 within in this short timeslot).
What can i do - and how do i get more information about the "maybe missing or defective DLL".
It's very URGEND !!!
Thanks in Advance



   Attached Image(s)