请问有哪些设备支持外部水晶？

理查德你好，
使用STM8CubeMX是一种简单的解决方案，可以检查设备是否支持外部晶振。
如果您对STM8S超值系列MCU特别感兴趣，那么在MCU选择器中请通过应用如下图所示的滤波器缩小设备列表：
一旦通过双重克隆选择器件，您可以通过打开RCC项目并检查是否有名为HSE：Crystal / Ceramic Resonator的选项来检查外部晶体支持。通过这种方法，您可以在下面看到，例如STM8S003F3Px支持外部晶振。
关于您的问题：所有STM8S超值线路器件都支持外部晶振，但8引脚STM8S001J3除外，它只有一个外部时钟输入。
我希望这些信息对您有所帮助。
问候
Szymon



以下为原文




Hello Richard,
Using of STM8CubeMX is an easy solution how you can check if device supports an external crystal.
If you are particularly interested in STM8S Value Line MCUs, then in MCU selector please shrink the list of devices by applying the filter like on picure below:
Once you select the device by double-clinking on it, you can check external crystal support by opening RCC item and by checking if there is an option named HSE: Crystal/Ceramic Resonator. With this approach you can see below that for example STM8S003F3Px supports external crystal.
Regarding your question: all STM8S Value Line devices support external crystal except 8-pin STM8S001J3, which has only one input for external clock.
I hope this information will be helpful to you.
Regards
Szymon

“
理想情况下，8引脚器件会支持它
 “
根据我的知识，没有那么多8针STM8S：1。
通过其数据表比在计算机上安装cubemx更容易。



以下为原文




'
Ideally, the 8-pin device would support it
'


there aren't that many 8-pin STM8S: 1 to my knowledge.


it is easier to go through its datasheet than getting cubemx installed on your computer.

“理想情况下”，8引脚器件应具有良好的内部振荡器，以便不会为外部引脚消耗有价值的引脚。



以下为原文




'Ideally', 8-pin devices should have good internal oscillators in order to not consume valuable pins for external ones.

什么是好的主观。



以下为原文




What's good is subjective.