完善资料让更多小伙伴认识你,还能领取20积分哦, 立即完善>
亲爱的ADS用户,我是ADS的新用户,我正在尝试使用S参数最小化多通道系统中线圈之间的互耦。
我在ADS中创建了一个差分通用端口,命令为“SnP_Diff组件”,带有3个端子,其中第一个端子是去耦电容,另外两个端子是指我的2个独立输入。 我的优化目标是找到最小化互感的电容值或特定频率下的S(2,3)(或S(3,2))。 我已经上传了与.Cti格式的等效my电路相关的S矩阵,我检查了3x3矩阵是否正确存在于文件中。 现在,在设置了OPTIMIZATION,GOAL和VARIABLES之后,ADS告诉我S-Matrix中可用的矩阵组件只有1,2。 它就像它没有看到第3行和列。 我的通用程序中是否有任何错误,或者我是否缺少有关S矩阵或ADS选项的一些知识? 非常感谢,Antonino M. Cassara'ps. 我以前在不同的时间做同样的程序并且正在工作,只是我一直在优化S(1,1)。 以上来自于谷歌翻译 以下为原文 Dear ADS users, I'm a new user of ADS and am trying to minimize the mutual coupling between coils in a multi-channel system using the S-parameters. I created in ADS a differential generic port with the command "SnP_Diff component" with 3 terminals, where the 1rst terminal is a decoupling capacitor and the other 2 terminals refers to my 2 indipendent input. The goal of my optimization is to find the value of the capacitor that minimizes the mutual induction or the S(2,3) (or S(3,2)) at a specific frequency. I have uploaded the S-matrix related to the equivalent my circuit in .CTI format, and I checked that the 3x3 matrix is present in the file correctly. Now, after setting the OPTIMIZATION, the GOAL and the VARIABLES, ADS tells me that the matrix components available in the S-Matrix are just 1,2. It is like it does not see the 3rd row&columns. Is there any error in my generic procedure, or am I missing some knowledge about the S-matrix or ADS option? Thank you so much, Antonino M. Cassara' p.s. I was doing the same procedure previously different time and was working, just I was having always to optimize with respect the S(1,1). |
|
相关推荐
1个回答
|
|
您好,您使用的.s3p文件的语法可能存在问题。
我建议使用常规的ADS S3P组件来读取citi .s3p文件以查看它是否返回相同的错误。 如果确实如此,则很可能是.s3p文件存在语法/格式问题。 以上来自于谷歌翻译 以下为原文 Hello, There might just be an issue with the syntax of the .s3p file you are using. I would suggest to use a regular ADS S3P component to read the citi .s3p file to see if it returns the same error. If it does then most likely there is a syntax/format issue with the .s3p file. |
|
|
|
只有小组成员才能发言,加入小组>>
1271 浏览 0 评论
2371 浏览 1 评论
2187 浏览 1 评论
2061 浏览 5 评论
2943 浏览 3 评论
1085浏览 1评论
关于Keysight x1149 Boundary Scan Analyzer
744浏览 0评论
N5230C用“CALC:MARK:BWID?”获取Bwid,Cent,Q,Loss失败,请问大佬们怎么解决呀
906浏览 0评论
1271浏览 0评论
小黑屋| 手机版| Archiver| 电子发烧友 ( 湘ICP备2023018690号 )
GMT+8, 2024-12-19 05:08 , Processed in 1.632988 second(s), Total 78, Slave 62 queries .
Powered by 电子发烧友网
© 2015 bbs.elecfans.com
关注我们的微信
下载发烧友APP
电子发烧友观察
版权所有 © 湖南华秋数字科技有限公司
电子发烧友 (电路图) 湘公网安备 43011202000918 号 电信与信息服务业务经营许可证:合字B2-20210191