完善资料让更多小伙伴认识你,还能领取20积分哦, 立即完善>
我有一个PIC18F45 K22的产品。我有MPLAB 8.45,在那里我准备了这个项目,并把它发送到我的CutoMeor,也有MPLAB。直到几天前,他才能够编译我发给他的代码。他开始收到一个错误信息,说C18不支持扩展模式。OPEDE总是在扩展模式下定义,而我发送的旧版本仍然可以在他的MPLAB中编译。当我把这些旧版本重新编译到MPLAB中并发送给他时,他收到了同样的错误信息。有什么错误吗?GalIt是错误消息:从GALV1-0 V3.3.1 V1-0DEVIN ProPosior开始发布项目C:AuthsApple FWW。MCP启动。语言工具版本:MPASMWIN .EXE V5.54,MPLANKIK.EXE V5.00,MCC18.EXE V3.47,MPLBI.EXE V5.00 Mon 11月14日11:30:56 2016 -------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------:目标:“Galv1-0 v3.3.1v1-0dpay-ADC.O”是过时的。执行:“C:程序文件(x86) Microchip MPLABC18 V3.47 bin McC18.exe”-P= 18F45 K22“dpAdc.c”-Fo=“DPY-ADC.O”-扩展-OU-OT -OB-OP-或-O。-----------D-OPA-MPLAB C18 3.47(功能有限)版权为2000年至2011年的Microchip技术公司。该版本的MPLAB C18不支持扩展模式,不会执行所有优化。要购买一整套MPLAB C18,请与当地经销商联系或访问..micro..com.ERROR:此版本的MPLLABC18不支持扩展模式。根据请求在第一次失败时停止构建。--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------“C:用户\alonalon文档神圣Pro文档神圣Pro\FW\FroGal Gal神圣Pro文档\\V1-V1-V1-V1-0V1-0V3.3.3.3.3.1\\\\\\V1 V1 V1 V1 V1 V1-V1-V1-V1-V1-V1-V1-0V1-0V1-0V2016年11月14日11:31:00--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------发光二极管
以上来自于百度翻译 以下为原文 I have a producr with PIC18F45K22. I have MPLAB 8.45, where I prepare the project, and send it to my cutomer, that also have MPLAB. till a few days ago, he was able to compile the code I have sent him. Than, he started receive an error message, saying that the C18 does not support extended mode. The project was always defined in extended mode, and older versions that I have sent can still be compiled in his MPLAB. When I take these old versions, recompile again in my MPLAB, and send him, he receives the same error message. Any idea what went wrong? Gal Here is the error message: Release build of project `C:UsersalonDocumentsDivine ProFWFrom GalV1-0 V3.3.1V1-0DevineProApplicator.mcp' started. Language tool versions: mpasmwin.exe v5.54, mplink.exe v5.00, mcc18.exe v3.47, mplib.exe v5.00 Mon Nov 14 11:30:56 2016 ---------------------------------------------------------------------- Make: The target "C:UsersalonDocumentsDivine ProFWFrom GalV1-0 V3.3.1V1-0DP_Adc.o" is out of date. Executing: "C:Program Files (x86)Microchipmplabc18v3.47binmcc18.exe" -p=18F45K22 "DP_Adc.c" -fo="DP_Adc.o" --extended -Ou- -Ot- -Ob- -Op- -Or- -Od- -Opa- MPLAB C18 3.47 (feature limited) Copyright 2000-2011 Microchip Technology Inc. This version of MPLAB C18 does not support the extended mode and will not perform all optimizations. To purchase a full copy of MPLAB C18, please contact your local distributor or visit buy.microchip.com. ERROR: This version of MPLAB C18 does not support extended mode. Halting build on first failure as requested. ---------------------------------------------------------------------- Release build of project `C:UsersalonDocumentsDivine ProFWFrom GalV1-0 V3.3.1V1-0DevineProApplicator.mcp' failed. Language tool versions: mpasmwin.exe v5.54, mplink.exe v5.00, mcc18.exe v3.47, mplib.exe v5.00 Mon Nov 14 11:31:00 2016 ---------------------------------------------------------------------- BUILD FAILED |
|
相关推荐
3个回答
|
|
|
|
|
|
C18的免费/评估版本不支持扩展指令集和其他一些优化。你必须购买完整的编译器。它与MPLAIDE无关。你是否从另一个安装程序重新安装C18?
以上来自于百度翻译 以下为原文 The free/evaluation version of C18 doesn't support the extended instruction set and some other optimizations. You have to buy the full compiler. It has nothing to do with MPLAB IDE. Did you reinstall C18 from a different installer? |
|
|
|
直到几天前,他还能编译我发给他的代码。然后,他开始收到一条错误信息:“这听起来像是一个Eval版本过期了。你和他们有一个完全授权的版本吗?”
以上来自于百度翻译 以下为原文 "Till a few days ago, he was able to compile the code I have sent him. Than, he started receive an error message," That sounds like an Eval Version expiring. Do you and they have a Full Licensed version? |
|
|
|
只有小组成员才能发言,加入小组>>
5006 浏览 9 评论
1923 浏览 8 评论
1853 浏览 10 评论
请问是否能把一个ADC值转换成两个字节用来设置PWM占空比?
3067 浏览 3 评论
请问电源和晶体值之间有什么关系吗?PIC在正常条件下运行4MHz需要多少电压?
2143 浏览 5 评论
574浏览 1评论
432浏览 1评论
PIC Kit3出现目标设备ID(00000000)与预期的设备ID(02c20000)不匹配。是什么原因
475浏览 0评论
367浏览 0评论
IPECMD命令烧录AVR128DA48芯片,报找不到芯片错误
852浏览 0评论
小黑屋| 手机版| Archiver| 电子发烧友 ( 湘ICP备2023018690号 )
GMT+8, 2024-8-17 02:16 , Processed in 1.205485 second(s), Total 83, Slave 66 queries .
Powered by 电子发烧友网
© 2015 bbs.elecfans.com
关注我们的微信
下载发烧友APP
电子发烧友观察
版权所有 © 湖南华秋数字科技有限公司
电子发烧友 (电路图) 湘公网安备 43011202000918 号 电信与信息服务业务经营许可证:合字B2-20210191