怎么在FM24CL64B-GA中写入100字节

170110/------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------我们正在使用的EEPROM是FM24C64 IC，在其中我已经编写了一个代码来读取和读取100字节。2。临时缓冲区加载了tempbuf[100]数组中的模拟数据，其中我加载了递增的0x01数据，并将该值存储在tempbuf中直到0x64或100（十进制）。IE 0x01,0x020x03…0x64。这个值我写在EEPROM上的间隔为5SES。4。稍后，我读取了间隔为10秒&加上0x05&在测试报告图像上显示的数据：170110_Eeprom100BWritetest_0X03FF，这样0x01,0x02,0x03将被检索为0x06,0x07,0x08.....5。0字节6。但是观察表明在38字节之后读出的数据是不正确的。请任何人帮我写并取回多达512字节的长字节，因为我知道任何选择主地址的规则。我还附上我为PIC32MZ和声P写的代码。IC324ECM100



      以下为原文

    170110//--------------------------------------------------------------------------------------------------------
1. Eeprom we are using is FM24C64 ic in which I have made a code to write & read 100bytes.
2. Temp buffer is loaded with a mock data in an tempbuf[100] array in which I have loaded the data of 0x01 incremented and stored the value in tempbuf upto 0x64 or 100(decimal). ie 0x01,0x02,0x03.......0x64
3. This value I have written on eeprom in an interval of 5secs.
4. Later on I have read the data with an interval of 10sec & added 0x05 & displayed it on uart the test report image: 170110_Eeprom100BWritetest_0X03FF.such that 0x01,0x02,0x03 will retrieved as 0x06,0x07,0x08.....
5.I have written the data in the eeprom from starting address of 0x03ff up to 100 bytes
6.But the observation showed that after 38bytes the data read was incorrect after this 38 bytes.
Please any one help me how to write & retrieve the long bytes upto 512Bytes,alos aware me of any rule for selecting the
memory address.I have also attached my code written for PIC32MZ hARMony PIC32048ECM100
   Attached Image(s)


Attachment(s)

mI2CdevicesCfile.txt (9.60 KB) - downloaded 164 times