完善资料让更多小伙伴认识你,还能领取20积分哦, 立即完善>
有没有人能够使用USBS驱动程序在HTBASIC中对Agilent U2761A函数发生器进行编程?
以上来自于谷歌翻译 以下为原文 Has anyone successfully been able to program the Agilent U2761A Function geerator in HTBASIC using the USBS driver? |
|
相关推荐
1个回答
|
|
您好 - 您需要硬件驱动程序才能使U2761A正常工作。
不幸的是,非Windows操作系统不支持该驱动程序,并且很可能无法使用HTBASIC.Thanks!Steve 以上来自于谷歌翻译 以下为原文 Hello- You will need the hardware driver to make the U2761A work. Unfortunately, the driver isn't supported with non-Windows operating systems and will likely not work with HTBASIC. Thanks! Steve |
|
|
|
只有小组成员才能发言,加入小组>>
971 浏览 0 评论
2250 浏览 1 评论
2028 浏览 1 评论
1907 浏览 5 评论
2772 浏览 3 评论
753浏览 1评论
关于Keysight x1149 Boundary Scan Analyzer
548浏览 0评论
N5230C用“CALC:MARK:BWID?”获取Bwid,Cent,Q,Loss失败,请问大佬们怎么解决呀
642浏览 0评论
2430浏览 0评论
1486浏览 0评论
小黑屋| 手机版| Archiver| 电子发烧友 ( 湘ICP备2023018690号 )
GMT+8, 2024-9-5 09:20 , Processed in 1.289747 second(s), Total 79, Slave 62 queries .
Powered by 电子发烧友网
© 2015 bbs.elecfans.com
关注我们的微信
下载发烧友APP
电子发烧友观察
版权所有 © 湖南华秋数字科技有限公司
电子发烧友 (电路图) 湘公网安备 43011202000918 号 电信与信息服务业务经营许可证:合字B2-20210191 工商网监 湘ICP备2023018690号