完善资料让更多小伙伴认识你,还能领取20积分哦, 立即完善>
扫一扫,分享给好友
大家好!
我正在做的是将数据流数据的数据传输到ata100硬盘。 我真的不确定从哪里开始,并且会喜欢某个方向。 我们计划使用Ultra DMA 100规范并购买了使用规范的权利。 关于如何处理这个问题我一直在做很多阅读,并且没有提出任何与我们需要相关的内容。 我已经绘制了每个引脚以及它在ide驱动器上使用的内容,但这就是我已经消失了。 任何帮助将不胜感激。 多谢你们! 以上来自于谷歌翻译 以下为原文 Hey guys! What i am looking at doing is taking data from a digital camera that is streaming data, to a ata100 hard disk. I am really unsure of where to begin and would love some direction. We are planning to use the Ultra DMA 100 spec and have purchased the rights to use the spec as well. I have been doing alot of reading around as to how to approach this and am coming up with nothing relavent to what we need. I have mapped out each pin and what it is used for on the ide drive, but that is as far as ive gone. Any help would be greatly appreciated. Thanks guys! |
|
相关推荐
1个回答
|
|
好吧,首先,如果您告诉我们用于流式摄像机数据的格式,它可能会有所帮助。
-一个 ----------------------------是的,我这样做是为了谋生。 以上来自于谷歌翻译 以下为原文 Well, first it might help if you told us the format used for the streaming camera data. -a ----------------------------Yes, I do this for a living. |
|
|
|
只有小组成员才能发言,加入小组>>
2239 浏览 7 评论
2653 浏览 4 评论
Spartan 3-AN时钟和VHDL让ISE合成时出现错误该怎么办?
2142 浏览 9 评论
3210 浏览 0 评论
如何在RTL或xilinx spartan fpga的约束文件中插入1.56ns延迟缓冲区?
2276 浏览 15 评论
有输入,但是LVDS_25的FPGA内部接收不到数据,为什么?
520浏览 1评论
1598浏览 1评论
92浏览 1评论
在使用xc5vsx95T时JTAG扫片不成功,测量TDO无信号输出
2246浏览 0评论
565浏览 0评论
小黑屋| 手机版| Archiver| 电子发烧友 ( 湘ICP备2023018690号 )
GMT+8, 2024-7-27 04:10 , Processed in 1.139399 second(s), Total 78, Slave 62 queries .
Powered by 电子发烧友网
© 2015 bbs.elecfans.com
关注我们的微信
下载发烧友APP
电子发烧友观察
版权所有 © 湖南华秋数字科技有限公司
电子发烧友 (电路图) 湘公网安备 43011202000918 号 电信与信息服务业务经营许可证:合字B2-20210191