Pic32mz2048efh144怎么使用s1d13517控制器与7英寸wvga显示器连接

嗨，上周我买了一个7英寸的显示器与PIC32 MZ控制器接口，我使用以下组件，PIC32 MZ2048 EF144控制器运行在200兆赫，PICTHOP加爱普生S1D13517板，168至132引脚连接器，7英寸定制设计板与PICTWEN板（引脚是适当的）接口，但问题是当程序被加载时，它开始显示红色屏幕，绿色屏幕，蓝色屏幕黑白，同样的事情会重复。我试图调试从最后一个，我无法检测到的问题。我检查了数据管脚和其他逻辑引脚，如帧、VSYNC、HSYNC所有信号都会正常，请帮我纠正这个问题。注意：我尝试了PIC32 MX795F512L控制器。7英寸LCD正在显示我运行的程序（我在MPLAB哈蒙中使用了图形对象代码示例）。Y文件夹，但不在PIC32 MZ。



      以下为原文

    hi,
last week i bought a 7 inch display to interfacing with pic32mz controller,
i am using following components,
Pic32mz2048ef144 controller running at 200Mhz,
pictail plus epson s1d13517 board,
168 to 132 pin connecter,
7inch custom designed board to interface with pictail board(pins are proper),

but,
the problem is when the program is loaded it start displaying the Red screen, Green screen, blue screen black white respectively and again the same thing will repeat.
i trying to debug from last one i am unable to detect the problem. i checked the data pins and other logical pins like frame, vsync, hsync all signals are coming properly,

please help me out to rectify this problem.

Note:
i tried with the pic32mx795f512l controller the 7inch lcd is displaying the program which i run(i used graphics object code example in mplab hARMony folder), but not in pic32mz.