PERL：RSYNC输入不会立即同步

您好我正在使用ICCAP20011，我尝试填充LSYNC输入但是输入的大小似乎没有立即跟随“主扫描”的大小作为一个例子，这里是一段PEL代码，假设我们有一个输入
“索引”是LSYNC输入“L”的主扫描。
输入的大小为10：+ newnumvalues = 11+ + iccap_func（“./Index”，“SetTableFieldValue”，“＃of Values”，VAL $（newnumvalues））+ + i = 1到newnumvalues + + iccap_func（
“./L”，“SetTableFieldValue”，“Value”＆amp; VAL $（i），VAL $（i））+ + next i +首次执行时，ic-cap抱怨它无法找到“Value 11”
输入“L”在第二个，它不再抱怨，L输入大小实际上是11也许使用“#ofvalue”来调整输入大小是不正确的事情，但我不知道该怎么做
相反，我终于通过在调整大小后强制重新实现补充行来找到解决方案：+ iccap_func（“./L”，“SetTableFieldValue”，“Master Sweep”，“Index”）+但它看起来有点像
hacking为了调整主扫描输入和LSYNC的大小，要做什么是正确的？
谢谢本杰明编辑：bdormieu于2013年2月1日上午5:19编辑：bdormieu于2013年2月1日上午5:26



     以下为原文

  Hello

I am currently using ICCAP20011 and i try to fill a LSYNC input
However the size of that input seems to not follow immediately the size of the "Master Sweep"  

As an example, here is a piece of PEL code, assuming we have a input "Index" which is the Master Sweep of the LSYNC input "L". Sizes of the input are initalized at 10 :


+newnumvalues = 11+

+iccap_func( "./Index", "SetTableFieldValue", "# of Values", VAL$(newnumvalues))+

+for i=1 to newnumvalues+
    +iccap_func( "./L", "SetTableFieldValue", "Value "&VAL$(i), VAL$(i) )+  
+next i+


At  first execution, ic-cap complains that it can't found "Value 11" for input "L"
At the second one, it does not complain anymore, L input size is actually 11

Maybe the use of  "# of Values" to resize the input is not the correct thing to do, but i don't know what to do instead

I finally found a solution by forcing the re-actualization  with the supplementary line after the resize:
+iccap_func( "./L", "SetTableFieldValue", "Master Sweep", "Index")+
but it slightly looks like a hacking

What is the correct thing to do in order to resize both the master sweep input and the LSYNC?

Thanks

Benjamin

Edited by: bdormieu on Feb 1, 2013 5:19 AM

Edited by: bdormieu on Feb 1, 2013 5:26 AM