唤醒信号代码会丢失轨道

你好，

我正在尝试如下配置唤醒信号WKPU6。

WKUP.WISR.B.EIF = 0x02000000; //清除中断标志
WKUP.WIREER.B.IREE = 0x02000000; //禁用上升沿
WKUP.WIFEER.B.IFEE = 0x02000000; //启用下降沿
WKUP.IRER.B.EIRE = 0x00000000; //启用中断
WKUP.WRER.B.WRE = 0x02000000; //启用系统唤醒
WKUP.WIFER.B.IFE = 0x02000000;

但是当执行上面的代码时，在第一个语句之后，代码会丢失轨道并且永远不会返回。是什么原因？我也试图从另一端配置位。你能澄清一下这种行为吗？任何用于唤醒信号的测试应用程序？

在此先感谢您的帮助。
麦克风。
＃醒来



以下为原文




Hello,

I am trying to configure a wakeup signal WKPU6 as below.

WKUP.WISR.B.EIF = 0x02000000; //Clear interrupt flag
WKUP.WIREER.B.IREE = 0x02000000; //Disable rising edge
WKUP.WIFEER.B.IFEE = 0x02000000; //Enable falling edge
WKUP.IRER.B.EIRE = 0x00000000; //Enable interrupt
WKUP.WRER.B.WRE = 0x02000000; //Enable system wakeup
WKUP.WIFER.B.IFE = 0x02000000;

But when above code is executed, after the first statement, the code looses the track and never returns. What is the reason? I have tried to configure the bits from another end as well. Can you please clarify the behavior? Any test app for wakeup up signal?

Thanks in advance for all your help.
Mike.  
#wakeup