完善资料让更多小伙伴认识你，还能领取20积分哦， 立即完善>
3天内不再提示
电子发烧友论坛|
首先，SyrSox1011调试器ICD3以前工作过……对所有这些都是……ICD3***入并显示在项目配置调试程序PaseSeAm硬件中，在程序员/调试器之前工作。尝试了我的另一个PIDIT3相同的结果。OSX 10.11看到调试器试图恢复到3。55相同的结果，3.40的相同的结果，是否有一个配置或缓存需要删除？
以上来自于百度翻译 以下为原文 firstly.. System OSX 10.11 debugger ICD3 everything worked before... YES to all these.. ICD3 is plugged in and shows in the project config Test debugger passes same hardware as before this programmer / debugger worked before. tried my other pickit3 same result.. OSX 10.11 sees the debugger USB 3.0 Bus: Host Controller Driver: AppleUSBXHCIPPT PCI Device ID: 0x1e31 PCI Revision ID: 0x0004 PCI Vendor ID: 0x8086 MPLAB¬Æ ICD3 tm (www.microchip.com): Product ID: 0x9009 Vendor ID: 0x04d8 (Microchip Technology Inc.) Version: 1.00 Serial Number: JIT170510561 Speed: Up to 480 Mb/sec Manufacturer: Microchip Technology, Inc. (www.microchip.com) Location ID: 0x14200000 / 17 Current Available (mA): 1000 Current Required (mA): 500 Extra Operating Current (mA): 0 Tried to revert to 3.55 same result, and 3.40 same result.. is there a config or cache i need to delete? 
0
|
|
相关推荐
8个回答
|
|
|
嗨，是的，有一个缓存。在MPLAB X中打开“帮助”菜单，除了“程序”和“版本”的信息外，选择“AbOutt”，在框的底部有一个Java缓存目录路径。还有一个用户设置目录的路径，其中可以下载下载的插件。迈西尔
以上来自于百度翻译 以下为原文 Hi, Yes, there is a cache. In MPLAB X open the 'Help' menu, and select 'About' In addition to information about program and version, there is directory path to java cache in bottom of the box. There is also path to user settings directory, where downloaded plugins may be stored. Mysil |
|
|
|
|
|
未安装的所有MPLAB版本，手动删除高速缓存目录…重新安装…相同的行为…所有的编程函数都变灰了，即使ICD3在属性中显示并通过测试功能。
以上来自于百度翻译 以下为原文 uninstalled all MPLAB version, manually deleted cache directories... reinstalled... same behaviour.. All programming functions grayed out, even though the icd3 shows in the properties and passes testing function |
|
|
|
|
|
你是否尝试过IPE（如果它也安装在OSX上）？Close MpLabX，在你尝试之前，你改变了USB端口吗？
以上来自于百度翻译 以下为原文 Did you try IPE (if that is installed also for OsX) ? Close MpLabX before you try that. Did you change USB ports ? |
|
|
|
|
|
ICD3是否连接到上电PIC？在识别出与之相连的PIC之前，不能进行编程。
以上来自于百度翻译 以下为原文 Is the ICD3 connected to a powered up PIC? You cannot program until it has identified what PIC it is connected to. |
|
|
|
|
|
您确定项目没有更改为模拟器吗？如果不选择另一个工具，则再次选择ICD3。
以上来自于百度翻译 以下为原文 Are you Sure the Project did not change to simulator? If Not Select another tool, then select ICD3 again. |
|
|
|
|
|
上面我指出，ICD3在MPELAB通过了“程序员自我测试功能”。此外，我还确认，这不是在模拟模式……在进一步测试，其他项目没有灰色时，加载。所以在这个项目中有一些东西使他们变灰了。（即使它在我更新MPLAB前10秒运行良好）我创建了一个新项目，剪切并粘贴源到项目中的新文件。这工作…道德的故事，如果你的东西是工作永远不会更新任何东西…曾经…信任更新简直是愚蠢的工作。
以上来自于百度翻译 以下为原文 I indicated above that the ICD3 PASSED the "Programmer Self Test Function" in MPELAB. Also i also confirmed that this was not in Simulation mode... Upon further testing, other projects WERE NOT grayed out when loaded.. so there was something in this project that caused them to be grayed out.. (even though it worked fine 10 seconds before i updated mplab) I created a new project an Cut and pasted the source into NEW FILES in the project.. that worked.. Moral of the story, if your stuff is working NEVER UPDATE ANYTHING.... EVER... its simply STUPID to trust an update will just work fine.... |
|
|
|
|
|
这就是为什么我建议切换到一个不同的工具，然后换回来。我曾经认为它是使用模拟器之前。但你修复它，所以这并不重要。
以上来自于百度翻译 以下为原文 That is why I suggested Switching to a Different Tool, Then changing back. I have had it think it was using the Simulator Before. But you fixed it so it does not matter. |
|
|
|
|
|
这个问题已经解决了…结果表明，该项目的配置从项目中的“应用程序”改为“库”-gt；构建-gt；“配置类型”。把它改回到“应用程序”固定它，当我找不到一个十六进制文件尝试用IPE编程时，灯泡就熄灭了，它只是一个LPP文件。
以上来自于百度翻译 以下为原文 The issue is resolved... It turned out to be that the config for the project changed from "Application" to "Library" in the project-->Building--> "Configuration Type".. Changing it back to "Application" fixed it The bulb went off when i couldn't find a Hex file to try and program with the IPE, it was only an LPP file.. |
|
|
|
|
只有小组成员才能发言，加入小组>>
5255 浏览 9 评论
2038 浏览 8 评论
1958 浏览 10 评论
请问是否能把一个ADC值转换成两个字节用来设置PWM占空比？
3219 浏览 3 评论
请问电源和晶体值之间有什么关系吗？PIC在正常条件下运行4MHz需要多少电压？
2268 浏览 5 评论
792浏览 1评论
688浏览 1评论
有偿咨询，关于MPLAB X IPE烧录PIC32MX所遇到的问题
617浏览 1评论
PIC Kit3出现目标设备ID(00000000)与预期的设备ID(02c20000)不匹配。是什么原因
686浏览 0评论
586浏览 0评论
/7 
关注我们的微信
下载发烧友APP
电子发烧友观察
版权所有 © 湖南华秋数字科技有限公司
电子发烧友 （电路图） 湘公网安备 43011202000918 号 电信与信息服务业务经营许可证：合字B2-20210191
工商网监
湘ICP备2023018690号
2664
评论
淘帖
1956
