X-NUCLEO.IDW04A陷入重置

您好
我们计划使用ST的新WIFI模块来替换旧模块（从另一个供应商处）
所以我 ：
1.购买了NUCLEO-F401RE和X-NUCLEO.IDW04A板。
2.下载了en.x-cube-wifi1_firmware软件。
3.根据UM2183中的第6页完成电路板设置（X-NUCLEO-IDW04A1入门）
4.使用IAR编译固件（Server_Socket），并将其下载到板上。
跑。
现在软件卡在wifi_reset（）函数中，以便让舞台开始使用。
while（IO_status_flag.WiFi_WIND_State！= WiFiHWStarted）

{
__NOP（）; //没事做
所以在我开始大调查之前，我在想，也许我不是唯一一个看到这个问题的人。
所以我希望你们其中一个人可以给我一个提示，谢谢你们...

#x-cube-wifi1＃spwf04sa＃x-nucleo-idw04a1



以下为原文




HI
We are planing to use a new WIFI module from ST for replacing the old module ( form another supplier )  
so I :
1. bought a NUCLEO-F401RE and a X-NUCLEO.IDW04A boards.
2. downloaded the en.x-cube-wifi1_firmware software.
3. done the board setup according to page 6 in UM2183 (Getting started with the X-NUCLEO-IDW04A1)
4. compiled the firmware (Server_Socket) with IAR, and downloaded it to the board.
5. run.
and now the software get stuck in the wifi_reset() function wating for the stage to get started.
while(IO_status_flag.WiFi_WIND_State != WiFiHWStarted)

{
__NOP(); //nothing to do
} so before I get started with the big investigation, I was thinking that maybe I wasn't the only one that have see this problem.
So I'm hoping that one of you guys can give me a hint, thanks in advance..

#x-cube-wifi1 #spwf04sa #x-nucleo-idw04a1