对Harmony Configurator V 2.04的更改会破坏项目？

你看到的编译错误是什么？这是很难调试而不看到细节。你正在改变的目标设备或BSP选择？我们试图涵盖从AlmiaQuixEnject项目中可以从Microchip获得的每种可能的图形硬件配置。这是你正在使用的图形项目吗？



      以下为原文

    What are the compile errors you see?  This is very hard to debug without seeing the details.
Are you changing the target device or the BSP selected?
 
We try to cover every possible graphics hardware configuration that is available from Microchip in the aria_quickstart project.  Is this the graphics project you are using?

好的。“玩”的缺点之一是不记得事件的顺序。我发现昨天我在图形作曲家中添加了SQI内存，想看看我是否能在那里存储图形。我还添加了配置器中的SQI驱动程序。我已经删除了SQI驱动程序，但是SQI内存定义在作曲家中仍然存在，虽然没有完全定义，也没有使用，因为我不知道该怎么做。我删除了它，现在它编译了。我的一部分希望这样的工具会捕获所有的东西；我的一部分知道你不能。捕捉一切！请在我探索和学习时容忍我——我现在正在阅读文档，看看如何在SQI内存中添加并使用它。



      以下为原文

    OK...one of the downsides of "playing around" is not remembering the sequence of events.
 
I have found that yesterday I had added SQI memory in Graphics Composer, wanting to see if I can store graphics there. I had also added the SQI drivers in the Configurator. I had removed the SQI drivers, but the SQI memory definition was still there in the composer although not fully defined, nor used, as I didn't understand what to do.
 
I deleted that, and it now compiles.
 
Part of me expects that a tool such as this would trap for everything; part of me knows you can't trap for everything!
 
Please bear with me as I explore and learn - I am now reading the docs to see how to add in the SQI memory and use it.

我建议你看看ARIAL外部资源和阿里亚尔Flash演示项目。他们不使用SQI闪存，但他们存储芯片外的图形。



      以下为原文

    I would recommend you look at the aria_external_resources and aria_flash demonstration projects.  They don't use SQI flash, but they do store graphics off-chip.

我会的，谢谢你。但是到目前为止，经验表明他们不会编译和运行。但我可以看看这些配置。



      以下为原文

    I will, thank you...but experience, so far, suggests they won't compile and run. But I can look at the configurations of course.

至少，这些项目应该建立起来。如果你有硬件，这些项目应该运行。



      以下为原文

    At a minimum, these projects should build.  If you  have the hardware required, these project should run.