完善资料让更多小伙伴认识你,还能领取20积分哦, 立即完善>
在调试器STVD永久存在故障。只有重启才有帮助
以上来自于谷歌翻译 以下为原文 In debugger STVD permanently there are failures. Only reboot helps |
|
相关推荐
7个回答
|
|
调试器被汇编程序的一个命令(bcp a,#)杀死。转换完毕后就开始工作了。
以上来自于谷歌翻译 以下为原文 The debugger was killed by one command of the assembler (bcp a,#). After changeover on all began to work. |
|
|
|
|
|
|
|
在使用之前我已经看到了这个问题。我认为STVD会泄漏内存,也就是说它不会释放它使用的所有PC资源。当你大部分时间使用它时,你可以解决这个问题。您需要关闭并重新启动释放资源的应用程序。
我没有在更高版本的STVD中看到这个问题。也许如果您使用的是旧版本,则应下载最新版本。 以上来自于谷歌翻译 以下为原文 I have seen this problem before it use to happen a lot. I think STVD leaks memory, that is it does not free up all PC resources it uses. When you use it most of the day you can get this problem. You need to shut down and restart the application which frees up the resources. I have not seen this problem with later versions of STVD. Maybe if you are using an older version you should download the latest version. |
|
|
|
|
|
|
|
但是你使用汇编语言还是C?如果汇编程序,你有像jp和调用指令一样的问题吗?
再见 以上来自于谷歌翻译 以下为原文 But do you use an assembler language or C? If assembler, have you the same problems like me with jp and call instructions? Bye |
|
|
|
我使用***osmiс的汇编程序和C. STVD汇编程序创建不是一个工作代码.....
以上来自于谷歌翻译 以下为原文 I use ***osmiс's assembler and C. STVD assembler creates not a working code..... |
|
|
|
你有没有尝试过STM8的IAR(它是免费的)。看看我的上一个回复:JP和CALL指令的问题。
以上来自于谷歌翻译 以下为原文 Have you ever tried IAR for STM8 (It's free). Look my last reply on: Problems with JP and CALL instructions. |
|
|
|
只有小组成员才能发言,加入小组>>
请教:在使用UDE STK时,单片机使用SPC560D30L1,在配置文件怎么设置或选择?里面只有SPC560D40的选项
1960 浏览 1 评论
2681 浏览 1 评论
请问是否有通过UART连接的两个微处理器之间实现双向值交换的方法?
1558 浏览 1 评论
3121 浏览 6 评论
5557 浏览 21 评论
533浏览 4评论
945浏览 4评论
在Linux上安装Atollic TRUEStudio的步骤有哪些呢?
349浏览 3评论
使用DMA激活某些外设会以导致外设无法工作的方式生成代码是怎么回事
912浏览 3评论
869浏览 3评论
小黑屋| 手机版| Archiver| 电子发烧友 ( 湘ICP备2023018690号 )
GMT+8, 2024-6-26 21:15 , Processed in 1.157558 second(s), Total 90, Slave 74 queries .
Powered by 电子发烧友网
© 2015 bbs.elecfans.com
关注我们的微信
下载发烧友APP
电子发烧友观察
版权所有 © 湖南华秋数字科技有限公司
电子发烧友 (电路图) 湘公网安备 43011202000918 号 电信与信息服务业务经营许可证:合字B2-20210191