linux installer程序组条目已存在

你好@ theultimatesource，
我相信在您取消之前的安装时，已经创建了“Xilinx设计工具”文件夹。
你能导航到/home//.Xilinx/Common/（例如/ home /anatoli / .Xilinx / Common / 18.2），看看你是否在这里创建了'Xilinx Design Tools'文件夹？
如果不在上述位置，请在/home//.Xilinx/中搜索并查看是否可以检测到它的创建位置？
如果找到，请将其删除并重新启动安装程序，这样您就可以选择“Xilinx设计工具”，而不会告诉您这已存在。
或者，只需为程序组条目指定一个新名称，例如：“Xilinx设计工具2018.2”，这也将满足安装程序。
希望这可以帮助。
亲切的问候，Anatoli Curran，Xilinx技术支持-----------------------------------------
--------------------------------不要忘记回复，工作，并接受解决方案.----
--------------------------------------------------
-------------------
在原帖中查看解决方案



以下为原文

Hello @theultimatesource,
 
I believe at the time when you've cancelled your previous installation, the folder 'Xilinx Design Tools' has already been created.
Can you please navigate to /home//.Xilinx/Common/ (e.g./home/anatoli/.Xilinx/Common/2018.2) and see if you have 'Xilinx Design Tools' folder created somewhere here? If not in the above location, search within /home//.Xilinx/ and see if you can detect where it got created? If found, remove this and re-launch the installer and this should then let you then to select 'Xilinx Design Tools' without telling you this already exists.
Alternatively, just give this some new name for the program group entry, e.g.: 'Xilinx Design Tools 2018.2', and this will/should satisfy the installer too.
 
Hope this helps.
 
Kind Regards,
Anatoli Curran,
Xilinx Technical Support
-------------------------------------------------------------------------
Don’t forget to reply, kudo, and accept as solution.
-------------------------------------------------------------------------View solution in original post

您好@theultimatesource，
你能改变安装路径并检查吗？
例如，通过添加另一个目录结构。
谢谢
Prathik
--------------------------------------------------
---------------------------------
不要忘记回复，kudo，并将相应的帖子标记为“接受为解决方案”。
--------------------------------------------------
---------------------------------



以下为原文

Hi @theultimatesource,
 
Can you change the installation path and check? Like for example by adding another directory structure.
 
Thanks
Prathik
-----------------------------------------------------------------------------------
Don't forget to reply, kudo, and mark the appropriate post as 'accept as solution'.
-----------------------------------------------------------------------------------

你好@prathikm，
谢谢您的回复。
如果我选择其他安装路径，则错误仍然存​​在。
我不确定它对于简单地使用不同的程序组进行此安装会产生什么影响。
我不知道在linux机器上有这样的概念。



以下为原文

hello @prathikm,
 
thank you for your reply.
 
If I choose another installation path the error persists.
 
I am not sure what impact it has to simply use a different program group for this install. I am not aware of such concept on a linux machine.

你好@ theultimatesource，
我相信在您取消之前的安装时，已经创建了“Xilinx设计工具”文件夹。
你能导航到/home//.Xilinx/Common/（例如/ home /anatoli / .Xilinx / Common / 18.2），看看你是否在这里创建了'Xilinx Design Tools'文件夹？
如果不在上述位置，请在/home//.Xilinx/中搜索并查看是否可以检测到它的创建位置？
如果找到，请将其删除并重新启动安装程序，这样您就可以选择“Xilinx设计工具”，而不会告诉您这已存在。
或者，只需为程序组条目指定一个新名称，例如：“Xilinx设计工具2018.2”，这也将满足安装程序。
希望这可以帮助。
亲切的问候，Anatoli Curran，Xilinx技术支持-----------------------------------------
--------------------------------不要忘记回复，工作，并接受解决方案.----
--------------------------------------------------
-------------------



以下为原文

Hello @theultimatesource,
 
I believe at the time when you've cancelled your previous installation, the folder 'Xilinx Design Tools' has already been created.
Can you please navigate to /home//.Xilinx/Common/ (e.g./home/anatoli/.Xilinx/Common/2018.2) and see if you have 'Xilinx Design Tools' folder created somewhere here? If not in the above location, search within /home//.Xilinx/ and see if you can detect where it got created? If found, remove this and re-launch the installer and this should then let you then to select 'Xilinx Design Tools' without telling you this already exists.
Alternatively, just give this some new name for the program group entry, e.g.: 'Xilinx Design Tools 2018.2', and this will/should satisfy the installer too.
 
Hope this helps.
 
Kind Regards,
Anatoli Curran,
Xilinx Technical Support
-------------------------------------------------------------------------
Don’t forget to reply, kudo, and accept as solution.
-------------------------------------------------------------------------

在我的情况下没有文件夹〜/ .Xilinx / Common / 2018.2。
我在/ home /，/ etc /，/ usr /搜索'2018'以及'Xilinx设计工具'，但没有成功。
我给程序组条目一个替代名称，这使我能够完成安装。
谢谢



以下为原文

There is no folder ~/.Xilinx/Common/2018.2 in my case. I searched for '2018' as well as 'Xilinx Design Tools' in /home/, /etc/, /usr/ without success.
 
I gave the program group entry an alternative name which allowed me to conclude installation.
 
Thank you

你好再次@ theultimatesource，
谢谢你让我知道。
我从当地专家那里得到的一些额外信息：
此行为取决于您如何停止该过程。
那是不是通过GUI或安装程序刚被杀？
如果您刚刚杀死安装程序，则很可能是因为安装程序当时没有处理安装的删除。
要删除程序组条目，它取决于桌面管理器（例如，在KDE中，您可以从程序启动组编辑应用程序）：
然后从这里删除它们。
一旦删除了Xilinx设计工具，您就可以再次安装。
或者，可以取消选择创建程序启动组，并且不会进行检查，或者更改为其他名称，这就是您为克服此问题而实际执行的操作。
无论如何，我很高兴听到你现在设法克服这个问题，现在已成功安装了该软件。
再次感谢，祝你有个美好的一天/晚上。
亲切的问候，Anatoli Curran，Xilinx技术支持-----------------------------------------
--------------------------------不要忘记回复，工作，并接受解决方案.----
--------------------------------------------------
-------------------



以下为原文

Hello again @theultimatesource,
 
Thanks for letting me know.
Some additional info that I’ve found out from our local experts:
 
This behavior depends on how you’ve stopped the process. Was that done through the GUI or the installer was just killed?
If you’ve just killed the installer, it’s most likely expected because the installer didn’t handle the removal of the installation at the time.
 
To remove the Program Group Entries, it depends on the desktop manager (for example in KDE you can edit applications from the program start group):

 
And then delete them from here.
 
Once removed the Xilinx Design Tools, you will be able to install again.
 
Alternatively, the creating of the program start group can be unselected and that check won’t happen, or change to a different name and that is what you’ve actually done to overcome this issue.
 
Anyhow, I'm glad to hear you've now managed to overcome this problem and have now successfully installed the software.
 
Thanks once again and have a nice day/evening.
Kind Regards,
Anatoli Curran,
Xilinx Technical Support
-------------------------------------------------------------------------
Don’t forget to reply, kudo, and accept as solution.
-------------------------------------------------------------------------