是的,我浏览了各种帮助的OrthyTyxVoL*.pdf文档。我找不到基本的STEP1,步骤2的过程来启动我期待的电路板。我已经编程了8位设备,以前总是有一个小打印输出或帮助文件,给你非常具体的信息,让一切运行。我看到下面的第622页的伏尔加:步骤1:设置您的硬件提供信息,建立您的硬件。C32 MZ嵌入式连接(EF)启动器KEnter将启动工具箱板上的“USB调试”端口应用到PC上的USB端口,使用Mi-I B到A型USB电缆。请参阅PIC32 MZ嵌入式连接与浮点单元(EF)启动器套件的额外信息在这个硬件。PIC32 CZ CA70 XPLICAN超评估KITCONE的“调试USB”端口上的板上的USB端口在您的PC上使用微型B到A型USB电缆。请参阅PIC32 CZ CA70 XPrimultULVAULMI:从MPLAB和谐开始创建您的第一个项目教程步骤{ 2013-2017 Microchip技术公司MPLAB和谐V2.04 622评估工具包以获得关于hardwareOther BoardsConsult的更多信息,信息表或用户指南你的硬件。参考支持开发板的硬件支持BYMPLAB和谐的列表,我的困惑是,没有信息在信息表或用户指南的以太网启动器套件II。我尝试连接USB端口为其他工具包描述,但没有司机在设备管理器对不起,如果这是如此简单,这是令人沮丧的,但我花了2或3小时试图获得一个“Hello World”的经验&我只是一个硬件家伙试图运行足够的演示做PWORE度量和布局评估的新设计。谢谢您的帮助。乔
以上来自于百度翻译
以下为原文
Yes, I scanned through the various help_harmony_vol*.pdf docs. I couldn't find the basic step1 , step 2 process to start up the board that I was expecting. I've programmed the 8-bit devices before and there was always a little printout or help file that gave you very specific info on getting everything running.
I did see the following of page 622 of the vol1:
Step 1: Setting Up Your Hardware
Provides information for setting up your hardware.
Description
PIC32MZ Embedded Connectivity (EF) Starter Kit
Connect the "USB Debug" port on the starter kit board to a USB port on your PC using a Mini-B to Type-A USB cable. See PIC32MZ Embedded
Connectivity with Floating Point Unit (EF) Starter Kit for additional information on this hardware.
PIC32CZ CA70 Xplained Ultra Evaluation Kit
Connect the "Debug USB" port on the board to a USB port on your PC using a Micro-B to Type-A USB cable. See PIC32CZ CA70 Xplained Ultra
Volume I: Getting Started With MPLAB Harmony Creating Your First Project Tutorial Steps
© 2013-2017 Microchip Technology Inc. MPLAB Harmony v2.04 622
Evaluation Kit for additional information on this hardware
Other Boards
Consult the Information Sheet or User's Guide for your hardware. Refer to Supported Development Boards for the list of hardware supported by
MPLAB Harmony
My confusion was/ is that there is no information in the Information sheet or Users guide for the Ethernet Starter Kit II. I tried connecting the USB port as described for other kits but there was no driver detected in Device Manager
I'm sorry if this is so simplistic that it's frustrating but I have spent 2 or 3 hours trying to get a "hello world" experience> I'm just a hardware guy trying to run enough demo to do power metrics and layout evaluation for a new design.
Thanks for your help.
Joe