完善资料让更多小伙伴认识你,还能领取20积分哦, 立即完善>
在重新安装较低版本的多个临时版之后,我最近安装了14.7版本的Xiling Design Tools。
现在看来一切正常,我在翻译处理过程中出现以下错误。 [XdmHelpers 0]无法打开库C:/Xilinx/14.7/ISE_DS/ISE/data/xilinxun.xda:Xdm_Exception :: InvalidFileFormat format = binary file ='C:/Xilinx/14.7/ISE_DS/ISE/data/xilinxun。 XDA” 检查文件xilinxun.xda,我发现它分别为空(0字节)和其他7个文件 MapLibBB.ltl, MapLibRules.drml, ngdout.pfd, ngdout.prp, ui.ifd, vhdllang.ssd, xilinxun.ttl 所以我想在安装过程中出现了问题(第三次,使用不同版本的Xilinx),因为我没有看到在文件夹中包含空文件的重点(如果它是空的,因此没用,为什么它应该是 那里?)。 现在我想知道 1a)我可以将这些文件从其他机器复制到我的文件夹中,确信Planahead能正常运行吗? (实际上我已经尝试过并且它成功地完成了实现,但是成功的实现并不意味着它产生了正确的输出。) 1b)有没有另一种方法来解决这个问题,而不是做1a)? 2)安装过程中出了什么问题? 我想知道未来的安装情况。 谢谢。 以上来自于谷歌翻译 以下为原文 I have recently installed the 14.7 version of Xiling Design Tools after multiple temptatives of reinstalling lower versions. Now that it seems all has gone right, I have the following error during the translate processing. [XdmHelpers 0] Failed to open library C:/Xilinx/14.7/ISE_DS/ISE/data/xilinxun.xda: Xdm_Exception::InvalidFileFormat format=binary file='C:/Xilinx/14.7/ISE_DS/ISE/data/xilinxun.xda' Checking the file xilinxun.xda, I found that it is empty (0 bytes), together with other 7 files, respectively MapLibBB.ltl, MapLibRules.drml, ngdout.pfd, ngdout.prp, ui.ifd, vhdllang.ssd, xilinxun.ttl so I guess something has gone wrong during the installation (for the third time, with different versions of Xilinx) since I don't see the point in including empty files in a folder (if it is empty and therefore useless, why should it be there?). Now I'd like to know 1a) can I just copy these files from an other machine into my folder, confident that Planahead will run correctly? (Actually I have already tried and it concludes the implementation successfully, but the successfull implementation does not mean that it produce a correct output.) 1b) is there an alternative way to fix this rather than doing 1a)? 2) What has gone wrong during the installation? I'd like to know in view of future installation. Thanks. |
|
相关推荐
2个回答
|
|
嗨,这个问题通常是由于安装损坏引起的。
请卸载并重新安装这些工具。 建议从“下载”网页重新下载文件,以确保下载没有损坏。 您可以尝试以下方法来检查安装状态。要检查文件是否已正确下载,下载文件的MD5校验和值应与下载文件的MD5总和值匹配(Xilinx网站 - >支持 - >下载)。 MD5sum可以从http://www.fastsum.com/下载。在将.tar文件提供给FastSum工具后,它将显示文件的Checksum state值。将校验和 state列值与下载页面上提供的值进行比较 赛灵思。 如果不匹配,则表示下载的文件未完成或已损坏。您必须再次从Xilinx网站下载Vivado。 http://www.xilinx.com/support/download/index.htm如果MD5校验和值与下载的文件匹配,则使用7zip软件解压缩,因为7-zip用于压缩软件。可以从http://下载 www.7-zip.org/(解压缩时请保持层次结构完整)建议在解压缩或解压缩下载文件时关闭防病毒软件。 谢谢,维杰----------------------------------------------- ---------------------------------------------请将帖子标记为 一个答案“接受为解决方案”,以防它有助于解决您的查询。如果一个帖子引导到解决方案,请给予赞誉。 以上来自于谷歌翻译 以下为原文 Hi, This issue is usually caused by a corrupt installation. Please un-install and re-install the tools. Recommend re-downloading the files from the Downloads webpage to ensure that the download was not corrupt. You may try the following to check the installation status. To check if the file was downloaded correctly, MD5 checksum value of downloaded file should match with MD5 sum value from where file was downloaded (Xilinx website-->support-->download). MD5sum can be downloaded from http://www.fastsum.com/ After feeding your .tar file to FastSum tool, it will display Checksumstate value of file. Compare the checksumstate column value with the value provided at download page on Xilinx. If there is mismatch, it means that the downloaded files are not complete or corrupted. You must again download Vivado from Xilinx website. http://www.xilinx.com/support/download/index.htm If MD5 checksum value matches with downloaded file then Use 7zip software to unzip since 7-zip was used for zipping the software. It can be downloaded from http://www.7-zip.org/ (Please keep the hierarchy intact when unzipping) It is recommended to turn off anti-virus when unzipping or extracting downloaded file. Thanks,Vijay -------------------------------------------------------------------------------------------- Please mark the post as an answer "Accept as solution" in case it helped resolve your query. Give kudos in case a post in case it guided to the solution. |
|
|
|
嗨,上述信息是否有助于解决您的问题。
如果是,请通过标记为解决方案来关闭线程。 谢谢,维杰----------------------------------------------- ---------------------------------------------请将帖子标记为 一个答案“接受为解决方案”,以防它有助于解决您的查询。如果一个帖子引导到解决方案,请给予赞誉。 以上来自于谷歌翻译 以下为原文 Hi, Did the above information helped solving your issue. If yes please close the thread by marking as solution.Thanks,Vijay -------------------------------------------------------------------------------------------- Please mark the post as an answer "Accept as solution" in case it helped resolve your query. Give kudos in case a post in case it guided to the solution. |
|
|
|
只有小组成员才能发言,加入小组>>
2370 浏览 7 评论
2786 浏览 4 评论
Spartan 3-AN时钟和VHDL让ISE合成时出现错误该怎么办?
2255 浏览 9 评论
3330 浏览 0 评论
如何在RTL或xilinx spartan fpga的约束文件中插入1.56ns延迟缓冲区?
2420 浏览 15 评论
有输入,但是LVDS_25的FPGA内部接收不到数据,为什么?
743浏览 1评论
请问vc707的电源线是如何连接的,我这边可能出现了缺失元件的情况导致无法供电
531浏览 1评论
求一块XILINX开发板KC705,VC707,KC105和KCU1500
344浏览 1评论
748浏览 0评论
1949浏览 0评论
小黑屋| 手机版| Archiver| 电子发烧友 ( 湘ICP备2023018690号 )
GMT+8, 2024-11-15 02:21 , Processed in 1.310543 second(s), Total 81, Slave 64 queries .
Powered by 电子发烧友网
© 2015 bbs.elecfans.com
关注我们的微信
下载发烧友APP
电子发烧友观察
版权所有 © 湖南华秋数字科技有限公司
电子发烧友 (电路图) 湘公网安备 43011202000918 号 电信与信息服务业务经营许可证:合字B2-20210191 工商网监 湘ICP备2023018690号