PS_B6 BLE中未生成CY_BLE_EVT_GAP_DEVICE_CONNECTED事件

你好，RAutStIN 2245351，
请注意，只有当“链接层隐私”被禁用时，才生成“CythBuryEvtGAPpDeice连接”事件。这可以通过取消组件“链接层设置”选项卡中的“启用链接层隐私”选项来完成。
话虽如此，当启用了LL隐私时，生成了“CythBuryEvtgGAPHyHangShan-CurnOffult”事件而不是此事件。原因是两个参数都稍微不同，传递给处理程序。您可以使用下面的代码自动地使用事件的任何一个，这取决于应用程序中是否启用了LL隐私。
如果（CythBulyLLL PrimaYyLyStudio启用）
病例：
{
CysStCyBuffggpHythangsN-CalnExcel
=（CysStCyBulgGAPHyHangShan-CalnExcel）PARAMAMT**事件PARAMAM；
否则
Cyb BuryEvtggpAPI Digice连接：
{
CysStCYBLIGGAPLICONDATION PARAMT**连接参数
=（CysStCyBulgGAPLCONTIDEND PARAMOT**）EVER PARAM；
第二节
让我知道这是否有帮助。
当做，
Meenakshi Sundaram R



     以下为原文
  Hello rautinst_2245351,
 
Please note that "CY_BLE_EVT_GAP_DEVICE_CONNECTED" event is generated only when "Link Layer privacy" is disabled. This can be done by unchecking the "Enable Link layer privacy" option in component's "Link layer Settings" tab.
 
Having said that, when LL privacy is enabled, instead of this event "CY_BLE_EVT_GAP_ENHANCE_CONN_COMPLETE" event is generated. The reason is both have a slightly different parameters that is passed to the handler. You can use the below code to automatically use either of the event depending on if LL privacy is enabled or not in your application.
 
#if(CY_BLE_LL_PRIVACY_FEATURE_ENABLED)
        case CY_BLE_EVT_GAP_ENHANCE_CONN_COMPLETE:
        {
            cy_stc_ble_gap_enhance_conn_complete_param_t *connParameters
                                                = (cy_stc_ble_gap_enhance_conn_complete_param_t *)eventParam;
    #else
        case CY_BLE_EVT_GAP_DEVICE_CONNECTED:
        {           
            cy_stc_ble_gap_connected_param_t *connParameters
                                                = (cy_stc_ble_gap_connected_param_t *)eventParam;
    #endif
 
 
Let me know if this helps.
 
Regards,
Meenakshi Sundaram R