完善资料让更多小伙伴认识你,还能领取20积分哦, 立即完善>
电子发烧友论坛|
你好,
我的名字是Martin,我是捷克共和国Roznov的信息学,电子工程和工艺中学的老师。 与一群学生一起,我们正在尝试使用您的SPC560P60L3微控制器创建控制板。我们在电路板设计期间遵循了AN2871,但我们仍然遇到微控制器启动过程的问题。 电路板供电后,微控制器仍处于复位状态,我们不知道原因。 我们已经根据您的应用说明检查了电压调节器,这对于去耦电容器设计是正确的。 你能不能给我任何建议,我能查一下吗? 先谢谢你。 最好的祝福, 马丁 以上来自于谷歌翻译 以下为原文 Hello, My name is Martin and I am teacher at Secondary school of informatics, electrical engineering and crafts in Roznov, Czech Republic. With a group of student, we are trying to create control board with your SPC560P60L3 microcontroller. We have followed AN2871 during our board design, but we still have problem with microcontroller boot up process. After power supply the board, microcontroller is still in reset and we do not know why. We have already checked Voltage regulator which seems to be correct according your application note, also decoupling capacitors are designed correct. Could you please send me any suggestion, what I can check? Thank you in advance. Best Regards, Martin |
|
相关推荐
2个回答
|
|
|
你好马丁,
没有原理图很难支持硬件设计 您应该查看Pictus Discovery Board(下面的Cf链接) http://www.st.com/en/evaluation-tools/spc56p-discovery.html 最好的祝福 二万 以上来自于谷歌翻译 以下为原文 Hello Martin , Difficult to support the hardware design without schematics You should check the Pictus Discovery Board (Cf link below) http://www.st.com/en/evaluation-tools/spc56p-discovery.html Best Regards Erwan |
|
|
|
|
|
你好,Erwan,
非常感谢您的反馈。我会检查您发送给我的链接。 不幸的是,我不能分享原理图,因为我们不想透露我们对其他学校的了解,这也是竞争对手。 当我不自己发现问题时,有没有可能,如何通过私人方式分享原理图? 问候, 马丁 以上来自于谷歌翻译 以下为原文 Hello Erwan, thank you very much for your feedback.I will check the link you sent me. Unfortunately, I cannot share the schematic, because we do not want to reveal our know how to another schools, which compete too. Is there any possibility, how to share the schematic by private way when I will not discover the issue by myself? Regards, Martin |
|
|
|
|
只有小组成员才能发言,加入小组>>
stm32mp157的异核通信的rpmsg_sdb的m4固件和a7驱动该如何编写?
1472 浏览 0 评论
stm32f103用freertos对一个采样率为1kHz的传感器,进行采样,数据出差
1526 浏览 0 评论
请教:在使用UDE STK时,单片机使用SPC560D30L1,在配置文件怎么设置或选择?里面只有SPC560D40的选项
3674 浏览 1 评论
3864 浏览 1 评论
请问是否有通过UART连接的两个微处理器之间实现双向值交换的方法?
2483 浏览 1 评论
STM32H7打开DCache后,出现了串口接收信息为空的现象,是哪里出了问题?
752浏览 5评论
用NANO STM32F103RBT6的开发板烧录不了是哪里出了问题?
685浏览 5评论
730浏览 5评论
外部中断触发类型为双边沿触发,进入中断回调后有什么办法判断该边沿是上升沿还是下降沿?
977浏览 5评论
STM32L071CBT6低温环境下无法正常工作是什么原因引起的?
780浏览 5评论
/9
小黑屋| 手机版| Archiver| 电子发烧友 ( 湘ICP备2023018690号 )
GMT+8, 2025-12-15 10:03 , Processed in 1.083467 second(s), Total 74, Slave 57 queries .
Powered by 电子发烧友网
© 2015 bbs.elecfans.com
关注我们的微信
下载发烧友APP
电子发烧友观察
版权所有 © 湖南华秋数字科技有限公司
电子发烧友 (电路图) 湘公网安备 43011202000918 号 电信与信息服务业务经营许可证:合字B2-20210191

淘帖
536