完善资料让更多小伙伴认识你,还能领取20积分哦, 立即完善>
这是我第一次尝试MPLAB快递。我熟悉MPLAB,但从未使用过基于云的版本。我已经尝试了好几次让软件加载,但每次我在同一点尝试时都会挂起。甚至现在轮子在“装载设备信息”上旋转。它已经这样做了大约5分钟。这是我今天第三次尝试,等着看什么——如果发生什么事。我做错什么了吗?我登录,它做了两件事,然后挂在“加载设备信息”。我没有设备连接,我在任何地方都没有指定的设备,我没有在任何地方创建一个项目,所以我真的不知道它想要加载什么设备信息。有人对我应该尝试什么有什么建议吗?
以上来自于百度翻译 以下为原文 This is my first time trying MPLAB Express. I am familiar with MPLAB, but have never used the cloud based version. I have tried several timed to get the software to load, but it hangs every time I try at the same point. Even right now the wheel is spinning at "Loading device information". It has been doing this now for about 5 minutes. This is the 3rd time I have tried today and waited to see what - if anything - happens. Am I doing something wrong? I log in and it does a couple of things and then hangs on "Loading device information". I don't have a device connected, I have no specified a device anywhere, I have not created a project anywhere, so I don't really understand what device information its trying to load. Does anyone have any suggestions on what I should try? |
|
相关推荐
2个回答
|
|
|
|
|
|
|
|
|
|
只有小组成员才能发言,加入小组>>
5050 浏览 9 评论
1938 浏览 8 评论
1877 浏览 10 评论
请问是否能把一个ADC值转换成两个字节用来设置PWM占空比?
3094 浏览 3 评论
请问电源和晶体值之间有什么关系吗?PIC在正常条件下运行4MHz需要多少电压?
2160 浏览 5 评论
602浏览 1评论
469浏览 1评论
有偿咨询,关于MPLAB X IPE烧录PIC32MX所遇到的问题
321浏览 1评论
PIC Kit3出现目标设备ID(00000000)与预期的设备ID(02c20000)不匹配。是什么原因
497浏览 0评论
404浏览 0评论
小黑屋| 手机版| Archiver| 电子发烧友 ( 湘ICP备2023018690号 )
GMT+8, 2024-9-10 16:03 , Processed in 1.136145 second(s), Total 78, Slave 61 queries .
Powered by 电子发烧友网
© 2015 bbs.elecfans.com
关注我们的微信
下载发烧友APP
电子发烧友观察
版权所有 © 湖南华秋数字科技有限公司
电子发烧友 (电路图) 湘公网安备 43011202000918 号 电信与信息服务业务经营许可证:合字B2-20210191 工商网监 湘ICP备2023018690号