如何计算最佳连接间隔？

嗨，
上
https://github.com/ARMmbed/ble-x-nucleo-idb0xa1
 您可以找到BlueNRG-MS的包装器库。特别是，BlueNRGGap类处理与广告相关的参数的计算：
BlueNRGGap :: setAdvParameters（）
和连接：
 
BlueNRGGap :: setConnectionParameters
（）
 
希望有所帮助。



以下为原文




Hi,
On
https://github.com/ARMmbed/ble-x-nucleo-idb0xa1
you can find a wrapper library for BlueNRG-MS.In particular, the BlueNRGGap class handles the computation of parameters related to Advertising:
BlueNRGGap::setAdvParameters()
and Connection:

BlueNRGGap::setConnectionParameters
()


Hope that helps.

我也一直在尝试不同的连接/扫描间隔组合，并在BlueNRG编程手册中找到了一些有用的指导（
http://www.st.com/content/ccc/resource/technical/document/programming_manual/1c/7e/d3/a6/d0/52/4a/35/DM00141271.pdf/files/DM00141271.pdf/jcr：内容/翻译/ en.DM00141271.pdf
例如，这来自第4.3节：
4.每次开始做广告时：
 
a）如果是直接广告，请选择Advertising_Interval_Min = Advertising_Interval_Max
=最短分配连接间隔的整数倍
b）如果不是直接广告，请选择Advertising_Interval_Min =
Advertising_Interval_Max使得（Advertising_Interval_Min + 5ms）是整数
多个最短的分配连接间隔希望这有帮助



以下为原文




I have also been experimenting with different connection / scan interval combinations and found some useful guidelines in the BlueNRG programming manual (
http://www.st.com/content/ccc/resource/technical/document/programming_manual/1c/7e/d3/a6/d0/52/4a/35/DM00141271.pdf/files/DM00141271.pdf/jcr:content/translations/en.DM00141271.pdf
For Example, this is from section 4.3:
4. Every time you start Advertising:

a) If Direct Advertising, choose Advertising_Interval_Min = Advertising_Interval_Max
= integer multiple of the shortest allocated connection interval
b) If not Direct Advertising, choose Advertising_Interval_Min =
Advertising_Interval_Max such that (Advertising_Interval_Min + 5ms) is an integer
multiple of the shortest allocated connection intervalHope this helps