[问答]

AC244066 PIC16F1619 EEP不工作

问答对人有帮助，内容完整，我也想知道答案 0 FoksA快速笔记，以节省你一天中最好的一部分，我刚才失去了，和不必要的成本更换单位，原来支持PIC16F1619 EEP仿真头AC244066回归MPLAB X 4.10，4.15和4.20，它似乎工作在4.05和更低（我测试下降到3.4）5）。在4.10和4.15中，我在调试器控制台选项卡中得到这个错误：或者取决于我是使用Realice还是ICD3。看起来它们已经改变了调试代码头和EEP从对象代码树中处理4.10的方式。当您尝试启动调试会话时，它永远不会达到与调试器对话的程度。在更亮的注释中，我所拥有的其他两个EEP（AC244063和AC244064）（PIC16F1829和PIC16F1788）似乎可以正常工作。因此，我会记住这一点，如果您使用调试头或EEP，一些其他可能会受到影响。回归到4.05似乎完全解决了问题。FWIW，我记录了一张票。编辑：添加4.20也不起作用。以上来自于百度翻译以下为原文 Folks A quick note to save you the best part of a day that I've just lost today, and the unnecessary cost of replacement unit, it turns out that support for the PIC16F1619 EEP Emulation Header AC244066 regressed at MPLAB X 4.10, 4.15 and 4.20, it seems to work in 4.05 and lower (I tested down to 3.45). In 4.10 and 4.15, I get this error in the Debugger Console tab: Launching Could not connect to tool hardware: RealICEPlatformTool, com.microchip.mplab.mdbcore.RealICETool.RIDbgToolManager The debugger could not be started. Terminating debug session. User program finished or Launching Could not connect to tool hardware: ICD3PlatformTool, com.microchip.mplab.mdbcore.ICD3Tool.ICD3DbgToolManager The debugger could not be started. Terminating debug session. User program finished depending on whether I'm using RealICE or ICD3. It looks like they've changed the way debug headers and EEPs are dealt with in 4.10 from the object code tree. It never gets as far as talking to the debugger when you attempt to start a debug session. On a brighter note, the other two EEPs I have, AC244063 and AC244064 (PIC16F1829 & PIC16F1789) seem to work OK. So I would bear this in mind if you use debug headers or EEPs, some others may be affected. Regressing to 4.05 appears to work around the problem perfectly well. FWIW, I logged a ticket. Edited: added that 4.20 doesn't work either. 0
2018-9-27 14:53:44　　评论淘帖0 邀请回答您可以邀请以下用户，快速回答问题 × qun333 该类别下有 57 个回答。邀请回答技术发广告该类别下有 56 个回答。邀请回答 caoguiqun 该类别下有 56 个回答。邀请回答 psw30 该类别下有 44 个回答。邀请回答伊丹姿子该类别下有 41 个回答。邀请回答 uwufwjrw 该类别下有 39 个回答。邀请回答 hetao1111 该类别下有 38 个回答。邀请回答 lc123617 该类别下有 35 个回答。邀请回答欧阳大大该类别下有 32 个回答。邀请回答作死不止该类别下有 31 个回答。邀请回答 asd010 该类别下有 31 个回答。邀请回答 60user92 该类别下有 29 个回答。邀请回答 wy8719 该类别下有 29 个回答。邀请回答 haikitty 该类别下有 28 个回答。邀请回答 ju978779 该类别下有 28 个回答。邀请回答嘻嘻爱哈哈该类别下有 28 个回答。邀请回答 xiuzhen122 该类别下有 27 个回答。邀请回答 pol666 该类别下有 27 个回答。邀请回答 ueywyrsdfs 该类别下有 26 个回答。邀请回答 lhly23 该类别下有 25 个回答。邀请回答举报黎桂珍相关推荐 • 帮助查找PIC16F1619的外设库 1982 • 如何获得GPIO选项在好奇的PIC16F1619设备资源？ 1232 • 如何用带有pic16F1619的8位好奇板通过开关来接通/断开？ 1080 • 怎么用PIC18F4680打开一个LED？ 1230 • IPE 5.0初始化失败 2737 • PIC16F1619中的PID重置累加器的高字节 1507 • 无法获取硬件工具通信资源 1779 • 好奇心PIC16F1619 UART带有rfid模块：chilli-uart-b1 2293 • 当电源重置时，使用PPS的RX引脚EUSART不工作怎么办 1613 • 使用16F1619还是使用16F1507编程时都会出现错误怎么回事 1133 2个回答

答案对人有帮助，有参考价值 0 这似乎已经在MPLAB X 5中解决了PACKIT3、ICD3和Realice，虽然在发布版本中我不能立即找到任何引用它。PICTIT4和ICD4仍然不支持任何EEP或PEP调试头。以上来自于百度翻译以下为原文 This appears to have been resolved in MPLAB X 5.00 for PICKIT3, ICD3 and RealICE, although I couldn't immediately locate any reference to it in the release notes. PICKIT4 and ICD4 still don't appear to support any EEP or PEP debug headers at all.

2018-9-27 15:00:53 评论举报王凤英

答案对人有帮助，有参考价值 0 由于PIC16F1619的这一部分仍然被标记为黄色，对于皮卡4和ICD 4，我不觉得这是一个惊喜。我记得另一个帖子，可能是HTTPS://www. McCHIP.COM/FUMMS/FUNDSPE/106942。以上来自于百度翻译以下为原文 As this part PIC16F1619 is still marked as Yellow for PicKit 4 and ICD 4 I do not find this a surprise. I recall another post that may be related https://www.microchip.com/forums/FindPost/1063942

2018-9-27 15:13:59 评论举报陈杰