请问STM32 MCU和STPM01 AFE如何建立它们之间的SPI通信？

你的设计是这样的......？
http://www.st.com/en/evaluation-tools/steval-rfplug01.html
我建议使用STPM32 / STPM33 / STPM34
寻找评估工具软件
http://www.st.com/en/data-converters/stpm33.html



以下为原文




You design is something like this... ?

http://www.st.com/en/evaluation-tools/steval-rfplug01.html
I suggest to use STPM32/ STPM33 / STPM34
Look for Evaluation Tool Software at
http://www.st.com/en/data-converters/stpm33.html

不，实际上我愿意使用ST（STM32f030K6T）和AFE模块（STPM ......）的MCU设计自己的主板。
我想象这个设计：
在那里，我需要建立MCU和AFE之间的低级通信层，但我在你的数据表中找不到一些软件库来促进通信; （仅SPI的硬件描述：
我是否被迫为AFE创建自己的硬件抽象层（HAL）？
还有其他公司提供常规SPI通信接口（已与任何MCU兼容）。
所以我的问题是：
有没有
 库通过SPI读写？如果不是我怎么能这样做（考虑到我会，但STPM ...和MCU可分离并设计我的板）？
谢谢



以下为原文




No, in fact i am willing to design my own board, using a MCU from ST (STM32f030K6T) and an AFE module (STPM...).
I imagined this design:
There for, i need to establish the low level communication layer between MCU and AFE, but i couldn't find in your datasheet, some software libraries to facilitate the communication; (only hardware description of SPI :
Am i forced to create my own Hardware Abstraction Layer (HAL) for the AFE ??
There is other companies providing a regular SPI communication Interface (already compatible with any MCU).
So my question is:
Is there any
libraries to read and write through SPI ? if not how can i do it then (considering that i will but the STPM.. and MCU separably and design my board)?

Thank you

对于新设计STPM32 / 33/34推荐
寻找评估工具软件
 
/external-link.jspa?url=http%3A%2F%2Fwww.st.com%2Fen%2Fdata-converters%2Fstpm33.html
 
 
 注意：原始帖子包含大量线程对话，只能迁移到第9级



以下为原文




For new designs STPM32/33/34 recommended

Look for Evaluation Tool Software at

/external-link.jspa?url=http%3A%2F%2Fwww.st.com%2Fen%2Fdata-converters%2Fstpm33.html


Note: the original post contained a large number of threaded conversations and was only able to be migrated to the 9th level