N9030A PXA信号分析仪是否具有进一步将信号下变频为DC的能力？

美好的一天，我目前正在使用是德科技的N9030A PXA信号分析仪，并提出了一些问题。
目前，我们的研究涉及尝试分析Ku波段中的脉冲信号并通过FPGA应用信号处理。
我们有一个RF前端，能够将信号下变频到MHz范围，但会出现一些问题：1）PXA信号分析仪是否具有进一步将信号下变频为DC（0 Hz）的能力？
如果有，是否有可用的教程可以解释如何配置分析仪来执行此操作？
2）我们希望将PXA上捕获的脉冲输出到FPGA，以便通过数字方式进行处理。
是否有可能做到这一点？
也许通过USB？
以太网？
我们如何设置分析仪？
恭敬地，谢谢Jessie。



     以下为原文

  Good day,

I am currently working with Keysight's N9030A PXA Signal Analyzer and have a few questions. Currently, our research involves attempting to analyze pulsed signals in the Ku Band and applying signal processing via an FPGA. We have an RF-front end that is capable of down-converting the signal to the MHz range but a few questions arise:

1) Does the PXA Signal Analyzer have capabilities to further down convert the signal to DC (0 Hz)? If so, is there a tutorial available that can explain exactly how to configure the analyzer to do this?  

2) We would like to output the captured pulse on the PXA to an FPGA for processing via digital means. Is it possible to do this? Maybe through USB? Ethernet? How would we set up the analyzer?  

Thank you, respectfully,  

Jessie.