完善资料让更多小伙伴认识你,还能领取20积分哦, 立即完善>
嗨,
我们正在研究温度记录仪应用程序,我们在我们的应用程序中使用LSM303D作为加速度计来唤醒运动系统。 我们通过I2C线路连接它,I2C线路上的其他传感器以及LSM303D与ATMega1284P MCU很少。 组装LSM303D并通过I2C线路寻址LSM303D后,MCU被破坏,之后无法正常工作。 它在I2C调用LSM303D后发生了两次,如果你在过去的kinldy中遇到过这个问题,请告诉我们原因/解决方案。 谢谢。 #lsm303d #accelerometer 以上来自于谷歌翻译 以下为原文 Hi, We are working on a temperature logger application, We are using LSM303D as accelerometer in our application to wake up system on movement. We have interfaced it over I2C lines, there are few other sensors on I2C lines along with LSM303D, with ATMega1284P MCU. After assembling LSM303D and addressing LSM303D over I2C lines destroyed MCU, after that it was not able to function properly. It happened twice after I2C calls to LSM303D, If you have undergone this problem in past kinldy let us know the reasons/ solutions. Thanks. #lsm303d #accelerometer |
|
相关推荐
1个回答
|
|
|
|
|
|
只有小组成员才能发言,加入小组>>
请教:在使用UDE STK时,单片机使用SPC560D30L1,在配置文件怎么设置或选择?里面只有SPC560D40的选项
2083 浏览 1 评论
2801 浏览 1 评论
请问是否有通过UART连接的两个微处理器之间实现双向值交换的方法?
1562 浏览 1 评论
3214 浏览 6 评论
5614 浏览 21 评论
599浏览 4评论
992浏览 4评论
在Linux上安装Atollic TRUEStudio的步骤有哪些呢?
356浏览 3评论
使用DMA激活某些外设会以导致外设无法工作的方式生成代码是怎么回事
970浏览 3评论
955浏览 3评论
小黑屋| 手机版| Archiver| 电子发烧友 ( 湘ICP备2023018690号 )
GMT+8, 2024-7-5 16:24 , Processed in 0.957931 second(s), Total 78, Slave 62 queries .
Powered by 电子发烧友网
© 2015 bbs.elecfans.com
关注我们的微信
下载发烧友APP
电子发烧友观察
版权所有 © 湖南华秋数字科技有限公司
电子发烧友 (电路图) 湘公网安备 43011202000918 号 电信与信息服务业务经营许可证:合字B2-20210191