完善资料让更多小伙伴认识你,还能领取20积分哦, 立即完善>
>我从未预料到三元组会相差二分之二秒。人!
即使是在每个指令保守的12次点击的这个笨拙的人身上,也就是“8000个指令”。 人! 我有完整的程序没有编译到8000条指令。-SHAWN ----您目前订阅了vrf:r***@soco.agilent.com要订阅,请发送一封空白电子邮件至“join-vrf@it.lists .it.agilent.com“。要取消订阅,请发送空白电子邮件至”leave-vrf@it.lists.it.agilent.com“。要发送邮件到此邮件列表,请发送电子邮件至”vrf@it.lists.it.agilent .COM”。 如果您需要有关邮件列表的帮助,请发送邮件至“owner-vrf@it.lists.it.agilent.com”。 以上来自于谷歌翻译 以下为原文 > I never expected the triadics would > differ by two tenths of a second. Man! Even on this clunker at a conservative 12 clicks per instruction that's over 8 thousand instructions. Man! I've got entire programs that don't compile out to 8000 instructions. -SHAWN- --- You are currently subscribed to vrf as: r***@soco.agilent.com To subscribe send a blank email to "join-vrf@it.lists.it.agilent.com". To unsubscribe send a blank email to "leave-vrf@it.lists.it.agilent.com". To send messages to this mailing list, email "vrf@it.lists.it.agilent.com". If you need help with the mailing list send a message to "owner-vrf@it.lists.it.agilent.com". |
|
相关推荐
6个回答
|
|
你好,这个函数似乎很简单,但是在复杂的程序中,你可能会遇到连接问题。这是正确的,要么所有输入都必须来自'datas'类型,否则来自'flow'类型,但不是混合。
当我注意到这个法律时,我会遇到一些问题。最好的问候托马斯沃尔特:vrf@agilent.comCc:vrf@it.lists.it.agilent.com---您目前订阅了vrf:r***@soco.agilent .com订阅时发送空白电子邮件至“join-vrf@it.lists.it.agilent.com”。要取消订阅,请发送空白电子邮件至“leave-vrf@it.lists.it.agilent.com”。发送消息 在此邮件列表中,请发送电子邮件至“vrf@it.lists.it.agilent.com”。 如果您需要有关邮件列表的帮助,请发送邮件至“owner-vrf@it.lists.it.agilent.com”。 以上来自于谷歌翻译 以下为原文 Hello, the function seems to simple, but in complex programs it can be, that youget problems with junctions.Is that right, that either all inputs have to be from type 'datas', elsefrom type 'flow', but not a mixture.When I notice this law, I have somethime problems with thatbehaviour. Best regardsThomas Walter To: vrf@agilent.comCc: vrf@it.lists.it.agilent.com---You are currently subscribed to vrf as: [email=r***@soco.agilent.com]r***@soco.agilent.com[/email]To subscribe send a blank email to "join-vrf@it.lists.it.agilent.com".To unsubscribe send a blank email to "leave-vrf@it.lists.it.agilent.com".To send messages to this mailing list, email "vrf@it.lists.it.agilent.com". If you need help with the mailing list send a message to "owner-vrf@it.lists.it.agilent.com". |
|
|
|
现在我明白了!>你遇到了连接问题。是的。
我们在您加入之前就看到了另一个例子。 一个令人惊讶的修复(至少我知道我感到震惊和敬畏)。>是的,所有>输入都必须来自'datas'类型,>来自类型'flow',但不是混合物。我不是 我知道官方的建议是什么,但是当我试图通过使用交叉点来控制流量时,我什么也没发现问题。 当我第一次开始使用VEE时,我试图用流结点进行循环,这是一场灾难。 我想在这方面有时VEE太*容易了! 它可以让你认为你可以做一些你真的不能做的事。如果你想把这个功能作为附件发布,我们都会建议不同的方法来解决你的问题。-SHAWN ----你现在订阅了 vrf as:r***@soco.agilent.com要订阅,请发送一封空白电子邮件至“join-vrf@it.lists.it.agilent.com”。要取消订阅,请发送一封空白电子邮件至“leave-vrf@it.lists.it”。 agilent.com“。要发送邮件到这个邮件列表,请发送电子邮件至”vrf@it.lists.it.agilent.com“。 如果您需要有关邮件列表的帮助,请发送邮件至“owner-vrf@it.lists.it.agilent.com”。 以上来自于谷歌翻译 以下为原文 Now I understand! > that you get problems with junctions. Yes. We saw another example of this just before you joined. And a surprising fix (at least I know I was shocked and awed). > Is that right, that either all > inputs have to be from type 'datas', > else from type 'flow', but not a mixture. I don't know what the official recommendation is, but I've found nothing but problems when trying to control flow by using junctions. When I first started using VEE, I tried to do a loop with a flow junction and it was a total disaster. I guess in that respect sometimes VEE is *too* easy! It can trick you into thinking you can do something you really can't. If you'd like to post the function as an attachment we'll all suggest a different method of solving your problem. -SHAWN- --- You are currently subscribed to vrf as: [email=r***@soco.agilent.com]r***@soco.agilent.com[/email] To subscribe send a blank email to "join-vrf@it.lists.it.agilent.com". To unsubscribe send a blank email to "leave-vrf@it.lists.it.agilent.com". To send messages to this mailing list, email "vrf@it.lists.it.agilent.com". If you need help with the mailing list send a message to "owner-vrf@it.lists.it.agilent.com". |
|
|
|
亲爱的,我正在开发一种便宜的GPIB接口板,用于提供数字I / O和专用附加功能的专用测量设置,例如。
如步进驱动器。 ...我实现了可以使用命令* IDN?检索的识别码。 我遵循安捷伦网站上的指南,即用逗号分隔四个字段。虽然我可以使用* IDN读取识别字符串? VEE中的后续读取命令,VEE仪器管理器在扫描总线时无法读取正确的设备名称。出了什么问题?Hans-Joachim Fischer ------------------ ------------------------ ESF GmbHBrennerweg 7D-89143 Blaubeuren + 49-7344-919693 + 49-7344-919691(传真)+ 49-175- 40 74 5 74(GSM)http://www.esf-gmbh.de-------------------------------- -------------您目前订阅了vrf:r***@soco.agilent.com要订阅,请发送一封空白电子邮件至“join-vrf@it.lists.it.agilent.com”。 要取消订阅,请发送一封空白电子邮件至“leave-vrf@it.lists.it.agilent.com”。要向此邮件列表发送邮件,请发送电子邮件至“vrf@it.lists.it.agilent.com”。 如果您需要有关邮件列表的帮助,请发送邮件至“owner-vrf@it.lists.it.agilent.com”。 以上来自于谷歌翻译 以下为原文 Dear all, I am developing a cheap GPIB interface board to be used in dedicated measurement setups providing digital I/O and dedicated additional functions, e.g. such as stepper drive. ... I implemented the identification code that can be retrieved using the command *IDN?. I followed the guidelines found on the Agilent web site, i.e. to have four fields separated by commas. Although I can read the identification string using *IDN? and a subsequent read command in VEE, the VEE instrument manager is not able to read the proper device name when scanning the bus. What is wrong? Hans-Joachim Fischer ------------------------------------------ ESF GmbH Brennerweg 7 D-89143 Blaubeuren +49-7344-919693 +49-7344-919691 (fax) +49-175-40 74 5 74 (GSM) http://www.esf-gmbh.de ------------------------------------------ --- You are currently subscribed to vrf as: [email=r***@soco.agilent.com]r***@soco.agilent.com[/email] To subscribe send a blank email to "join-vrf@it.lists.it.agilent.com". To unsubscribe send a blank email to "leave-vrf@it.lists.it.agilent.com". To send messages to this mailing list, email "vrf@it.lists.it.agilent.com". If you need help with the mailing list send a message to "owner-vrf@it.lists.it.agilent.com". |
|
|
|
>我认为“最好的”替代品是>多个三重声明,因为它* SINGLE *,SingleTriadic dang it。“护士,更多咖啡请...” - SHAWN ----您目前订阅了vrf as:r*** @
soco.agilent.com要订阅,请发送一封空白电子邮件至“join-vrf@it.lists.it.agilent.com”。要取消订阅,请发送空白电子邮件至“leave-vrf@it.lists.it.agilent.com”。 要将邮件发送到此邮件列表,请发送电子邮件至“vrf@it.lists.it.agilent.com”。 如果您需要有关邮件列表的帮助,请发送邮件至“owner-vrf@it.lists.it.agilent.com”。 以上来自于谷歌翻译 以下为原文 > I think the "best" replacement is the > multiple triadic statement because it *SINGLE*, SingleTriadic dang it. "Nurse, more coffee please..." -SHAWN- --- You are currently subscribed to vrf as: [email=r***@soco.agilent.com]r***@soco.agilent.com[/email] To subscribe send a blank email to "join-vrf@it.lists.it.agilent.com". To unsubscribe send a blank email to "leave-vrf@it.lists.it.agilent.com". To send messages to this mailing list, email "vrf@it.lists.it.agilent.com". If you need help with the mailing list send a message to "owner-vrf@it.lists.it.agilent.com". |
|
|
|
各位大家好,以前是否有人使用Agilent VEE构建光谱图?VEE是否具有光谱图的内置功能?请帮助,谢谢。最好的问候,Chris _________________________________________________________________使用MSN 8将照片添加到您的电子邮箱中。获得2个月免费* .http
://join.msn.com/?page = features / featuredemail ---您目前订阅了vrf:r***@soco.agilent.com要订阅,请发送一封空白电子邮件至“join-vrf@it.lists.it。 agilent.com“。要取消订阅,请发送空白电子邮件至”leave-vrf@it.lists.it.agilent.com“。要发送邮件到此邮件列表,请发送电子邮件至”vrf@it.lists.it.agilent.com“ 。 如果您需要有关邮件列表的帮助,请发送邮件至“owner-vrf@it.lists.it.agilent.com”。 以上来自于谷歌翻译 以下为原文 Hello everyone, Has anyone constructed spectrogram with Agilent VEE before ? Does VEE have a built-in function for spectrogram ? Please help, thank you. Best regards, Chris _________________________________________________________________ Add photos to your e-mail with MSN 8. Get 2 months FREE*. http://join.msn.com/?page=features/featuredemail --- You are currently subscribed to vrf as: [email=r***@soco.agilent.com]r***@soco.agilent.com[/email] To subscribe send a blank email to "join-vrf@it.lists.it.agilent.com". To unsubscribe send a blank email to "leave-vrf@it.lists.it.agilent.com". To send messages to this mailing list, email "vrf@it.lists.it.agilent.com". If you need help with the mailing list send a message to "owner-vrf@it.lists.it.agilent.com". |
|
|
|
迈克,肖恩和其他人......我相信你们都错过了显而易见的事情:一行有两行的公式对象怎么样:_____________________P1 |
| ArrP2 | 编曲= [P1,P2,P3,P4]; | ResultP3 | 编曲[E]; | P4 | | E | _____________________ |最好的问候,G。 尼德------------------------------------------------- ------------------------ Georg Nied - 软件开发 - Hansestr.7 - 51149科隆 - 德国电话:+49 2203 9770915 - 传真:+49 2203 9770924 - 电子邮件:info@gn-software.de --------------------------------------- - - - - - - - - - - - - - - - - - - - - - 原始信息 - - - - 主题:[vrf] RE:[VRF]交界处(08-Jul-2003 22:04)来自:mikegroves@pacbell.netTo:vrf@it.lists.it.agilent.com>好吧,我玩这个晚了 昨晚又提出了两种方法>可以做到。 (VEE不是很好吗?)一个使用单个公式,而另一个使用DeMultiplexer功能。 我还添加了函数调用> all all with timers。 执行>速度没有太大区别,单个三元组略有优势,所以(比如>大多数事情)它真正归结为个人偏好。>> Mike Groves ---您目前订阅了vrf: r***@soco.agilent.com要订阅,请发送空白电子邮件至“join-vrf@it.lists.it.agilent.com”。要取消订阅,请发送空白电子邮件至“leave-vrf@it.lists.it.agilent.com “。要发送邮件到这个邮件列表,请发送电子邮件至”vrf@it.lists.it.agilent.com“。 如果您需要有关邮件列表的帮助,请发送邮件至“owner-vrf@it.lists.it.agilent.com”。 以上来自于谷歌翻译 以下为原文 Mike, Shawn and others ... I believe you all miss the obvious: How about a single formula object with two rows: _____________________ P1 | | Arr P2 | Arr=[P1,P2,P3,P4]; | Result P3 | Arr[E]; | P4 | | E |_____________________| best regards, G. Nied ------------------------------------------------------------------------- Georg Nied - Software-Development - Hansestr.7 - 51149 Cologne - Germany Tel: +49 2203 9770915 - Fax: +49 2203 9770924 - eMail:info@gn-software.de ------------------------------------------------------------------------- -------- Original Message -------- Subject: [vrf] RE: [VRF] junction (08-Jul-2003 22:04) From: mikegroves@pacbell.net To: vrf@it.lists.it.agilent.com > Well, I played with this late last night and came up with 2 more ways > it can be done. (Isn't VEE great?) One uses a single formula and the > other uses the DeMultiplexer function. I also added function calls to > all of them with timers. There's not much difference in the execution > speeds, with a slight advantage going to the single triadic, so (like > most things) it really comes down to personal preference. > > Mike Groves --- You are currently subscribed to vrf as: [email=r***@soco.agilent.com]r***@soco.agilent.com[/email] To subscribe send a blank email to "join-vrf@it.lists.it.agilent.com". To unsubscribe send a blank email to "leave-vrf@it.lists.it.agilent.com". To send messages to this mailing list, email "vrf@it.lists.it.agilent.com". If you need help with the mailing list send a message to "owner-vrf@it.lists.it.agilent.com". |
|
|
|
只有小组成员才能发言,加入小组>>
1291 浏览 0 评论
2375 浏览 1 评论
2194 浏览 1 评论
2065 浏览 5 评论
2952 浏览 3 评论
1117浏览 1评论
关于Keysight x1149 Boundary Scan Analyzer
756浏览 0评论
N5230C用“CALC:MARK:BWID?”获取Bwid,Cent,Q,Loss失败,请问大佬们怎么解决呀
930浏览 0评论
1293浏览 0评论
小黑屋| 手机版| Archiver| 电子发烧友 ( 湘ICP备2023018690号 )
GMT+8, 2024-12-25 18:26 , Processed in 1.378712 second(s), Total 55, Slave 49 queries .
Powered by 电子发烧友网
© 2015 bbs.elecfans.com
关注我们的微信
下载发烧友APP
电子发烧友观察
版权所有 © 湖南华秋数字科技有限公司
电子发烧友 (电路图) 湘公网安备 43011202000918 号 电信与信息服务业务经营许可证:合字B2-20210191 工商网监 湘ICP备2023018690号