完善资料让更多小伙伴认识你,还能领取20积分哦, 立即完善>
大家好,这是我的第一篇帖子。
我唯一的经验是使用NationalInstruments NI488.2 PCICMA GPIB控制器卡,它与HP VEE配合使用,即插即用。 唯一的“问题”是安捷伦为自己的PCI接口保留GPIB总线地址“7”,因此您必须使用GPIB总线地址“14”作为NIcard.Dave PenneyMITRE CorporationHQ AMC / SCPPScott AFB,IL618-229- 6777dpenney@mitre.org--------------------------------------------- ------------------------这是由Majordomo管理的“vrf”maillist。 要向该maillist发送消息,只需发送电子邮件至“vrf@lvld.agilent.com”。 订阅和取消订阅是通过地址“vrf-request@lvld.agilent.com”完成的。如果您需要详细信息,只需将包含“help”文本的消息发送到“vrf-request@lvld.agilent.com”.--- -------------------------------------------------- ---------------- 以上来自于谷歌翻译 以下为原文 Hello to all, This is my first posting. My only experience is with the National Instruments NI488.2 PCICMA GPIB controller card and that works beautifully with HP VEE, strickly plug and play. The only sort of "gotcha" is that Agilent reserves GPIB Bus address "7" for their own PCI interfaces and you must, therefore, use GPIB bus address "14" for the NI card. Dave Penney MITRE Corporation HQ AMC/SCPP Scott AFB, IL 618-229-6777 dpenney@mitre.org --------------------------------------------------------------------- This is the "vrf" maillist, managed by Majordomo. To send messages to this maillist, just email to "vrf@lvld.agilent.com". Subscriptions and unsubscriptions are done through the address "vrf-request@lvld.agilent.com". If you need details, just send a message containing the text "help" to "vrf-request@lvld.agilent.com". --------------------------------------------------------------------- |
|
相关推荐
1个回答
|
|
有没有人有使用Compu-board(Measurement Computing)PCMCIA GPIB卡和VEE的经验?
有人曾提到成功使用过National Instruments卡。任何评论哪一个更好?Mark GetbeheadPhilips Broadband NetworksMark.Getbehead@philips.com---------------------- -----------------------------------------------这是 由Majordomo管理的“vrf”maillist。 要向该maillist发送消息,只需发送电子邮件至“vrf@lvld.agilent.com”。 订阅和取消订阅是通过地址“vrf-request@lvld.agilent.com”完成的。如果您需要详细信息,只需将包含“help”文本的消息发送到“vrf-request@lvld.agilent.com”.--- -------------------------------------------------- ---------------- 以上来自于谷歌翻译 以下为原文 Does anyone have any experience using the Compu-boards(Measurement Computing) PCMCIA GPIB card with VEE? Someone previously mentioned using a National Instruments card successfully. Any comments on which one is better? Mark Getbehead Philips Broadband Networks Mark.Getbehead@philips.com --------------------------------------------------------------------- This is the "vrf" maillist, managed by Majordomo. To send messages to this maillist, just email to "vrf@lvld.agilent.com". Subscriptions and unsubscriptions are done through the address "vrf-request@lvld.agilent.com". If you need details, just send a message containing the text "help" to "vrf-request@lvld.agilent.com". --------------------------------------------------------------------- |
|
|
|
只有小组成员才能发言,加入小组>>
1283 浏览 0 评论
2371 浏览 1 评论
2189 浏览 1 评论
2062 浏览 5 评论
2946 浏览 3 评论
1104浏览 1评论
关于Keysight x1149 Boundary Scan Analyzer
751浏览 0评论
N5230C用“CALC:MARK:BWID?”获取Bwid,Cent,Q,Loss失败,请问大佬们怎么解决呀
922浏览 0评论
1284浏览 0评论
小黑屋| 手机版| Archiver| 电子发烧友 ( 湘ICP备2023018690号 )
GMT+8, 2024-12-22 19:05 , Processed in 1.631709 second(s), Total 77, Slave 60 queries .
Powered by 电子发烧友网
© 2015 bbs.elecfans.com
关注我们的微信
下载发烧友APP
电子发烧友观察
版权所有 © 湖南华秋数字科技有限公司
电子发烧友 (电路图) 湘公网安备 43011202000918 号 电信与信息服务业务经营许可证:合字B2-20210191 工商网监 湘ICP备2023018690号