本帖最后由 盼盼2333 于 2016-5-21 16:42 编辑
由于操作基本上是在手机上进行操作,所以忘了截图……
首先我们让手机连上路由器~
然后打开微信关注开发快的公众号~
进入公众号->我的设备->配置绑定
然后小e上电,当OLED显示“开发从未如此简单”的时候,长按boot开关,屏幕会显示“网络配置中”,放开按键
点击开始配置,输入路由器密码~
然后会提示输入小e的APPKEY和UID,我们只需要扫一扫小e背面的二维码就可以了~
然后就可以在微信里欢快的进行操作了~
在路由器可以看到,这个未知应该是小e~
其实全程都可以开着串口助手查看串口消息,然后这里我好像发现一个BUG→_→
先看串口打印信息~
- ets Jan 8 2013,rst cause:1, boot mode:(3,7)
- load 0x40100000, len 1396, room 16
- tail 4
- chksum 0x89
- load 0x3ffe8000, len 776, room 4
- tail 4
- chksum 0xe8
- load 0x3ffe8308, len 540, room 4
- tail 8
- chksum 0xc0
- csum 0xc0
- 2nd boot version : 1.4(b1)
- SPI Speed : 40MHz
- SPI Mode : QIO
- SPI Flash Size & Map: 16Mbit(512KB+512KB)
- jump to run user1 @ 1000
- pp_task_hdl : 3fff4060, prio:13, stack:512
- pm_task_hdl : 3fff4940, prio:1, stack:176
- ApiMsgMutex created
- tcpip_task_hdl : 3fff4d58, prio:10,stack:512
- wdt_task : 3fff5618, prio:14, stack:176
- idle_task_hdl : 3fff6188
- tim_task_hdl : 3fff6580
- xPortStartScheduler
- frc2_timer_task_hdl:3fff6e90, prio:12, stack:512
- OS SDK ver: 1.2.0(b900bd2) compiled @ Aug 28 2015 17:18:41
- phy ver: 356, pp ver: 9.0
- now SDK version:1.2.0(b900bd2)
- run in normal mode
- get adc value=414 is success !!!
- get work mode=RGB is success !!!
- period:1000
- test pwm channel num: 3
- LIGHT PARAM: R: 0
- LIGHT PARAM: G: 0
- LIGHT PARAM: B: 0
- LIGHT PARAM: P: 1000
- ssid=HiWifi-2.4G
- mode : sta(18:fe:34:de:0d:10)
- add if0
- wifi led thread will be start
- scandone
- state: 0 -> 2 (b0)
- state: 2 -> 0 (2)
- airkiss start or start first don't restart 0
- reconnect
- scandone
- state: 0 -> 2 (b0)
- state: 2 -> 3 (0)
- state: 3 -> 5 (10)
- add 0
- aid 3
- cnt
- ERRRRRR:256,135,135!!!!ERRRRRR:256,113,113!!!!
- connected with HiWifi-2.4G, channel 10
- et connect to ssid HiWifi-2.4G, channel 10
- dhcp client start...
- ip:192.168.199.236,mask:255.255.255.0,gw:192.168.199.1
- got ip !!!
- ET U-SDK var2.1.0.2
- now addr is 192.168.199.236
- now write rc is 70
- now read delay is 300
- now server time is 18255897
- now server time is 19255899
- now server time is 20255888
- now read delay is 300
- now server time is 21255894
- now server time is 22255890
- now server time is 23255890
- now read delay is 300
- now server time is 24255894
- now server time is 25255888
- now server time is 26255897
- now read recv rc is -1
- now errno is 0
- read msg error
- ETClient_getAddr fail
- login_cloud fail
复制代码
第18行:SPI Flash Size & Map: 16Mbit(512KB+512KB)
作为一个理科生,16Mbit=2MB,而512KB+512KB=1MB→_→
|