[问答]

大神进来！看看这个程序哪里有问题

3998

问答对人有帮助，内容完整，我也想知道答案 0 #include #include #define uint unsigned int #define uchar unsigned char uchar table[6]="00.00V"; uchar num, temp; uint voltage; *it ad_clk=P3^3; it ad_out=P3^4; it ad_cs=P3^5; it lcden=P2^4; *it lcdrs=P2^5; void delayms(uint xms); void write_com(uchar com); void write_data(uchar date); void led_init(); void tlc549_ad(); void main () { led_init (); tlc549_ad (); } void led_init () { lcden=0; write_com(0x38); write_com(0x0c); write_com(0x06); write_com(0x01); } void tlc549_ad () { ad_cs=1; ad_clk=0; ad_cs=0; _nop_ (); _nop_(); for(num=0;num<8;num++) { temp<<=1; temp\|=ad_out; ad_clk=1; _nop_ (); ad_clk=0; } ad_cs=1; for(num=17;num>0;num--) _nop_ (); voltage=(uint)(5.0/256temp400); temp=0; table[0]=voltage/1000+48; table [1] =voltage%1000/100+48; table[3]=voltage%1000%100/10+48; table [4] =voltage%1000%100%10+48; write_com(0x80); for(num=0;num<6;num++) { write_data (table [num]); delayms (5); } delayms(2000); } void delayms (uint xms) { uint i, j; for (i=xms; i>0; i--) for (j=110; j>0; j--); } void write_com (uchar com) { lcdrs=0; P0=com; delayms (5); lcden=1; delayms (5); lcden=0; } void write_data (uchar date) { lcdrs=1; P0=date; delayms (5); lcden=1; delayms (5); lcden=0; } #include #define uint unsigned int #define uchar unsigned char #define ulong unsigned long #define PI 3.1415926 uchar code table1 [8] ="Welcome!"; uchar table2 [16] ="f (Hz) ="; uchar table3 [16] ="R (Ohm) ="; uchar table4 [16] ="C (pF) ="; uchar table5 [16] ="L (uH) ="; uchar num, a=0, th0, tl0; uint C, L; ulong f, R; it Lcden=P2^4; it Lcdrs=P2^5; it key_R=P1^5; it key_C=P1^6; it key_L=P1^7; it R_out=P1^2; it C_out=P1^3; it L_out=P1^4; void delayms1(uint xms); void write_com1(uchar com); void write_data1(uchar date); void led_init1(); void t_init1(); void keyscan1(); void display_f1(ulong f); void display_R1(ulong R); void display_C1(uint C); void display_L1(uint L); void main () { led_init1 (); t_init1 (); keyscan1 (); write_com (0x01); while (1) { display_f1 (f); switch (a) { case 1: R= (ulong) (5000000.0/0.6931472/f-150+0.5); display_R1(R); break; case 2: C= (int) (100000000.0/153/0.6931472/f+0.5); display_C1(C); break; case 3: L= (int) (1000000000000.0/0.1/PI/PI/f/f+0.5); display_L1 (L); break; } } } void T0_count () interrupt 1 { switch (a) { case 1: while (R_out); while (! R_out); TH0=0; TL0=0; while (R_out); while (! R_out); th0=TH0; tl0=TL0; TR0=0; break; case 2: while (C_out); while (! C_out); TH0=0; TL0=0; while (C_out); while (! C_out); th0=TH0; tl0=TL0; TR0=0; break; case 3: while (L_out); while (! L_out); TH0=0; TL0=0; while (L_out); while (! L_out); th0=TH0; tl0=TL0; TR0=0; break; } f=1000000.0/1.085069/(th0256+tl0)+0.5; } void delayms1 (uint xms) { uint i, j; for (i=xms;i>0;i--) for (j=110;j>0;j--); } void write_com1(uchar com) { Lcdrs=0; P0=com; delayms (5); Lcden=1; delayms (5); Lcden=0; } void write_data1(uchar date) { Lcdrs=1; P0=date; delayms (5); Lcden=1; delayms (5); Lcden=0; } void led_init1 () { Lcden=0; write_com(0x38); write_com(0x0c); write_com(0x06); write_com(0x01); write_com(0x80); for (num=0; num<8; num++) { write_data (table1 [num]); delayms (5); } } void t_init1 () { TMOD=0x01; TH0=0; TL0=0; EA=1; ET0=1; TR0=1; } void keyscan1 () { if (key_R==0) { delayms (10); if (key_R==0) a=1; } else if (key_C==0) { delayms (10); if (key_C==0) a=2; } else if (key_L==0) { delayms (10); if (key_L==0) a=3; } else while(key_R&&key_C&&key_L); } void display_f1 (ulong f) { uchar count=0; ulong f0; f0=f; while (f) { f=f/10; count++; } for (num=5+count; num>5; num--) { table2 [num] =f0%10+48; f0=f0/10; } write_com (0x80); for (num=0; num<6+count; num++) { write_data (table2 [num]); delayms (5); } } void display_R1 (ulong R) { uchar count=0; ulong R0; R0=R; while(R) { R=R/10; count++; } for (num=6+count; num>6; num--) { table3 [num] =R0%10+48; R0=R0/10; } write_com (0x80+0x40); for (num=0; num<7+count; num++) { write_data (table3 [num]); delayms (5); } } void display_C1 (uint C) { uchar count=0; uint C0; C0=C; while(C) { C=C/10; count++; } for (num=5+count; num>5; num--) { table4 [num] =C0%10+48; C0=C0/10; } write_com (0x80+0x40); for (num=0; num<6+count; num++) { write_data (table4 [num]); delayms (5); } } void display_L2 (uint L) { uchar count=0; uint L0; L0=L; while (L) { L=L/10; count++; } for (num=5+count; num>5; num--) { table5 [num] =L0%10+48; L0=L0/10; } write_com (0x80+0x40); for (num=0; num<6+count; num++) { write_data (table5 [num]); delayms (5); } } *** FATAL ERROR L256: MODULE CONTAINS DUPLICATE SEGMENT NAMES SEGMENT: ?PR?MAIN?TEXT1 MODULE: Text1.obj (TEXT1) Target not created 0 已退回3积分
2016-1-3 11:04:28　　评论淘帖0 邀请回答您可以邀请以下用户，快速回答问题 × zj1373534355 该类别下有 9 个回答。邀请回答 845414442 该类别下有 8 个回答。邀请回答陈星该类别下有 7 个回答。邀请回答刘政琨该类别下有 7 个回答。邀请回答 smartqing 该类别下有 7 个回答。邀请回答 516790 该类别下有 7 个回答。邀请回答 csz9981 该类别下有 7 个回答。邀请回答 LLDDE 该类别下有 7 个回答。邀请回答焚心劫该类别下有 7 个回答。邀请回答 rapemn 该类别下有 7 个回答。邀请回答寒艾锋该类别下有 7 个回答。邀请回答 zlkjgs 该类别下有 6 个回答。邀请回答 hwyy 该类别下有 6 个回答。邀请回答 zhouwenj 该类别下有 6 个回答。邀请回答 liuyang218 该类别下有 6 个回答。邀请回答鼓山该类别下有 6 个回答。邀请回答 1079940696 该类别下有 5 个回答。邀请回答我就要自己学该类别下有 5 个回答。邀请回答 Robot-boy 该类别下有 5 个回答。邀请回答落水瑶光该类别下有 5 个回答。邀请回答举报王龙相关推荐 • 哪位大神帮我看看这个程序哪里有问题 2991 • 各位大神谁帮我看看哪里有问题啊？程序加载进去仿真不显示内容 2646 • 大神们帮我看看这段程序问题在哪里？ 734 • 哪路大神帮给看看，哪里有问题，求指导~~~ 2765 • 大神看看这个电路有木有问题 4372 • 大家帮忙看看这个开发板是什么型号？哪里有卖的？ 2139 • 哪位大神，帮忙看看这个程序怎么编？重谢！ 2396 • 求大神帮忙看看这个程序为什么连接到仪器就收不到数据了求大神指点啊 6217 • 小小小白的AVR IIC写EEPROM程序。快要哭了，都好几天了。求大神帮忙看看到底是哪里错了。 4482 • 大神帮我看看这个程序，如何改进效果会更好 2105 5个回答