完善资料让更多小伙伴认识你，还能领取20积分哦， 立即完善>
3天内不再提示
|
Vhdl -- 写Testbench 1 六进制计数器的代码 Library ieee; use ieee.std_logic_1164.all; use ieee.std_logic_arith.all; use ieee.std_logic_unsigned.all; entity cnt6 is port (clr,en,clk :in std_logic; q :out std_logic_vector(2 downto 0) ); end entity; architecture rtl of cnt6 is signal tmp :std_logic_vector(2 downto 0); begin process(clk) -- variable q6:integer; begin if(clk'event and clk='1') then if(clr='0')then tmp<="000"; elsif(en='1') then if(tmp="101")then tmp<="000"; else tmp<=unsigned(tmp)+'1'; end if; end if; end if; q<=tmp; -- qa<=q(0); -- qb<=q(1); -- qc<=q(2); end process; end rtl; 2 六进制计数器testbench的代码library ieee; use ieee.std_logic_1164.all; entity cnt6_tb is end cnt6_tb; architecture rtl of cnt6_tb is component cnt6 port( clr,en,clk :in std_logic; q :out std_logic_vector(2 downto 0) ); end component; signal clr :std_logic:='0'; signal en :std_logic:='0'; signal clk :std_logic:='0'; signal q :std_logic_vector(2 downto 0); constant clk_period :time :=20 ns; begin instant:cnt6 port map ( clk=>clk,en=>en,clr=>clr,q=>q ); clk_gen:process begin wait for clk_period/2; clk<='1'; wait for clk_period/2; clk<='0'; end process; clr_gen:process begin clr<='0'; wait for 30 ns; clr<='1'; wait; end process; en_gen:process begin en<='0'; wait for 50ns; en<='1'; wait; end process; end rtl; 3 Testbench固定的一套格式其实testbench也有自己固定的一套格式，总结如下： --测试平台文件(testbench)的基本结构 library ieee; use ieee.std_logic_1164.all; entity test_bench is --测试平台文件的空实体（不需要端口定义) end test_bench; architecture tb_behavior of test_bench is component entity_under_test --被测试元件的声明 port( list-of-ports-theri-types-and-modes ); end component; begin instantiation:entity_under_test port map ( port-associations ); process() --产生时钟信号 …… end process; process() --产生激励源 …… end process; end tb_behavior; 3.1 简单计数程序源码 library ieee; use ieee.std_logic_1164.all; use ieee.std_logic_unsigned.all; use ieee.std_logic_unsigned.all; entity sim_counter is port( clk :in std_logic; reset :in std_logic; count :out std_logic_vector(3 downto 0) ); end entity; architecture behavioral of sim_counter is signal temp :std_logic_vector(3 downto 0); begin process(clk,reset) begin if reset='1' then temp<="0000"; elsif clk'event and clk='1' then temp<=temp+1; end if; end process; count<=temp; end behavioral; 3.2 简单计数程序，测试文件代码(testbench) library ieee; use ieee.std_logic_1164.all; use ieee.std_logic_unsigned.all; use ieee.numeric_std.all; entity counter_tb_vhd is --测试平台实体 end counter_tb_vhd; architecture behavior of counter_tb_vhd is --被测试元件（DUT）的声明 component sim_counter port( clk :in std_logic; reset :in std_logic; count :out std_logic_vector(3 downto 0) ); end component; --输入信号 signal clk:std_logic:='0'; signal reset :std_logic:='0'; --输出信号 signal count :std_logic_vector(3 downto 0); constant clk_period :time :=20 ns; --时钟周期的定义 begin dut:sim_counter port map( clk=>clk,reset=>reset,counter=>counter ); clk_gen:process begin clk='1'; wait for clk_period/2; clk='0'; wait for clk_period/2; end process; tb:process --激励信号 begin wait for 20 ns; reset<='1'; wait for 20 ns; reset<='0'; wait for 200 ns; wait; --will wait forever; end process; end; 4 激励信号的产生方式 4.1 自书写1， 以一定的离散时间间隔产生激励信号的波形。 2， 基于实体的状态产生激励信号，也就是说基于实体的输出响应产生激励信号 两种常用的复位信号 1.周期性的激励信号，如时钟 2.时序变化的激励型号，如复位 --eg.产生不对称时钟信号 w_clk<='0' after period/4 when w_clk='1' else '1' after 3*period/4 when w_clk='0' else '0'; --eg.产生堆成时钟信号，process语句 clk_gen1:process constan clk_period := 40 ns; begin clk='1'; wait for clk_period/2; clk='0'; wait for clk_period/2; end process; 4.2 Quartus II 自动生成如果自己不想写这些testbench的这些固定格式，可以在quartus里自动生成testbench文件的模板，然后往里面写信号就行了 步骤：processing->start->starttest bench template write 这里需要注意的是要在仿真选项里选择一个仿真工具，然后才会生成testbench 自动生成的testbench模板格式如下： [c-sharp] -- Copyright (C) 1991-2008 Altera Corporation -- Your use of Altera Corporation's design tools, logic functions -- and other software and tools, and its AMPP partner logic -- functions, and any output files from any of the foregoing -- (including device programming or simulation files), and any -- associated documentation or information are expressly subject -- to the terms and conditions of the Altera Program License -- Subscription Agreement, Altera MegaCore Function License -- Agreement, or other applicable license agreement, including, -- without limitation, that your use is for the sole purpose of -- programming logic devices manufactured by Altera and sold by -- Altera or its authorized distributors. Please refer to the -- applicable agreement for further details. -- *************************************************************************** -- This file contains a Vhdl test bench template that is freely editable to -- suit user's needs .Comments are provided in each section to help the user -- fill out necessary details. -- *************************************************************************** -- Generated on "03/13/2011 20:05:04" -- Vhdl Test Bench template for design : cnt6 -- -- Simulation tool : ModelSim (VHDL) -- LIBRARY ieee; USE ieee.std_logic_1164.all; ENTITY cnt6_vhd_tst IS END cnt6_vhd_tst; ARCHITECTURE cnt6_arch OF cnt6_vhd_tst IS -- constants -- signals SIGNAL clk : STD_LOGIC; SIGNAL clr : STD_LOGIC; SIGNAL en : STD_LOGIC; SIGNAL q : STD_LOGIC_VECTOR(2 DOWNTO 0); COMPONENT cnt6 PORT ( clk : IN STD_LOGIC; clr : IN STD_LOGIC; en : IN STD_LOGIC; q : OUT STD_LOGIC_VECTOR(2 DOWNTO 0) ); END COMPONENT; BEGIN i1 : cnt6 PORT MAP ( -- list connections between master ports and signals clk => clk, clr => clr, en => en, q => q ); init : PROCESS -- variable declarations BEGIN -- code that executes only once WAIT; END PROCESS init; always : PROCESS -- optional sensitivity list -- ( ) -- variable declarations BEGIN -- code executes for every event on sensitivity list WAIT; END PROCESS always; END cnt6_arch; 
8
|
|
相关推荐
15 个讨论
|
|
|
感谢分享，楼主好人
|
|
|
|
|
|
|
|
/6 
关注我们的微信
下载发烧友APP
电子发烧友观察
版权所有 © 湖南华秋数字科技有限公司
电子发烧友 （电路图） 湘公网安备 43011202000918 号 电信与信息服务业务经营许可证：合字B2-20210191
工商网监
湘ICP备2023018690号
25301
评论
淘帖
19
55821
