摇摇棒真心求助

``最近做了摇摇棒，程序烧写上英语字母显示不了，只显示汉字，怎么回事？令外谁有简单的程序``

lstcspring · 2012-12-16 15:53:01

你什么都没有提供，怎么知道怎么回事，坛有很多人做过，自己找一下

管冬明 · 2012-12-16 17:41:28

晕什么都么有怎么看啊怎么帮？

李松泽 · 2012-12-18 08:54:39

这是电路图

李松泽 · 2012-12-18 08:56:43

实物图

李松泽 · 2012-12-18 09:00:16

# include
# include
/**********************************************************
程序名称：LED摇摇棒显示64*16像素
简要说明：外部中断方式INT0显示；取模方式：纵向取模、字节倒序
编写：lisongze
最后更新：12/12/12
**********************************************************/

#define uchar unsigned char
#define uint unsigned int //宏定义
#define KEY P3_0 //定义画面切换按键
uchar KY; //KY作用在后面说明
uchar disp; //显示汉字指针
uchar pic=0,num=0; //pic为按键次数；num为中断次数
uchar code love[] = {
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0xFE,0x3F,0x00,0x20,0x00,0x20,0x00,0x20,
0x00,0x20,0x00,0x20,0x00,0x20,0x00,0x20,0x00,0x00,0x00,0x00,0x00,0x00,0xF8,0x0F,
0x04,0x10,0x02,0x20,0x02,0x20,0x02,0x20,0x02,0x20,0x04,0x10,0xF8,0x0F,0x00,0x00,
0x00,0x00,0x00,0x00,0xFE,0x07,0x00,0x08,0x00,0x10,0x00,0x20,0x00,0x20,0x00,0x10,
0x00,0x08,0xFE,0x07,0x00,0x00,0x00,0x00,0x00,0x00,0xFE,0x3F,0x82,0x20,0x82,0x20,
0x82,0x20,0x82,0x20,0x82,0x20,0x82,0x20,0x82,0x20,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,/*LOVE*/
};

uchar code loveyou[] = {
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x78,0x00,0xFC,0x00,0xFE,0x01,0xFE,0x03,0xFE,0x07,0xFE,0x0F,0xFE,0x1F,0xFC,0x3F,
0xF8,0x7F,0xFC,0x3F,0xFE,0x1F,0xFE,0x0F,0xFE,0x07,0xFE,0x03,0xFE,0x01,0xFC,0x00,
0x78,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,/*心形图案*/
};

uchar code hehe[] = {
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0xC0,0x01,0x40,0x01,0xC0,0x01,0x00,0x00,0x00,0x00,
0xF0,0x0F,0x08,0x10,0x04,0x20,0x00,0x00,0x00,0x00,0xF0,0x3F,0x08,0x00,0x04,0x00,
0x04,0x00,0x04,0x00,0x08,0x00,0xF0,0x3F,0x00,0x00,0x00,0x00,0x00,0x20,0x00,0x20,
0x00,0x20,0x00,0x20,0x00,0x20,0x00,0x00,0x00,0x00,0xF0,0x3F,0x08,0x00,0x04,0x00,
0x04,0x00,0x04,0x00,0x08,0x00,0xF0,0x3F,0x00,0x00,0x00,0x00,0x04,0x20,0x08,0x10,
0xF0,0x0F,0x00,0x00,0x00,0x00,0xC0,0x01,0x40,0x01,0xC0,0x01,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,/*呵呵o(∩_∩)o图案*/
};

unsigned char code hanzi[] = {
/*欣*/
0x00,0x40,0x00,0x30,0xFC,0x0F,0x44,0x00,
0x44,0x00,0xC2,0x7F,0x43,0x80,0x42,0x40,
0x20,0x30,0x1F,0x0C,0xD0,0x03,0x10,0x0C,
0x10,0x30,0x50,0xC0,0x30,0x40,0x00,0x00,
/*欣*/
0x00,0x40,0x00,0x30,0xFC,0x0F,0x44,0x00,
0x44,0x00,0xC2,0x7F,0x43,0x80,0x42,0x40,
0x20,0x30,0x1F,0x0C,0xD0,0x03,0x10,0x0C,
0x10,0x30,0x50,0xC0,0x30,0x40,0x00,0x00,
/*我*/
0x20,0x00,0x24,0x08,0x24,0x48,0x24,0x84,
0xFE,0x7F,0x23,0x02,0x22,0x21,0x20,0x10,
0xFF,0x09,0x20,0x06,0x22,0x1A,0xAC,0x61,
0x20,0x80,0x30,0xE0,0x20,0x00,0x00,0x00,

/*爱*/
0x40,0x00,0xB0,0x00,0x92,0x40,0x96,0x30,
0x9A,0x8C,0x92,0x83,0xF2,0x46,0x9E,0x2A,
0x92,0x12,0x91,0x2A,0x99,0x26,0x95,0x42,
0x91,0xC0,0x50,0x40,0x30,0x00,0x00,0x00,

/*你*/
0x40,0x00,0x20,0x00,0xF8,0xFF,0x07,0x00,
0x40,0x00,0x20,0x08,0x18,0x04,0x0F,0x43,
0x08,0x80,0xC8,0x7F,0x08,0x00,0x08,0x01,
0x28,0x06,0x18,0x0C,0x00,0x00,0x00,0x00
};

/*****函数声明*****/
void display1(void);
void display2(void);
void display3(void);
void display4(void);
/*****n（us）延时子程序*****/
void DelayUs(uint N)
{
uint x;
for(x=0; x<=N;x++);
}

/*****中断服务程序*****/
void intersvr0(void) interrupt 0 using 1
{
KY=~KY; //每个摇动来回水银开关会在摆幅两端分别产生下降沿中断，只提取其中一次（从左向右摇才显示）
if(KY==0)  //初始值为0，每一次翻转一次，两次只相应一次
{
   num++; //计算中断次数
   switch(pic) //选择画面初始值为0
   {
   case 0:{display1();}break;
   case 1:{display2();}break;
   case 2:{display3();}break;
   case 3:{display4();}break;
   default:{display1();}  //特殊情况显示画面一
   }
   }
}

void display1(void)
{
uchar i;
if(num>10){disp++;num=0;} //12个汉字分为3次显示完（每次显示4个），每中断10次切换
if(disp>1)disp=0;
   //DelayUs(5200); //此处延时时间依各硬件差别而各不相同，试着调整使得显示内容居中即可
   DelayUs(4500);
   switch(disp)
   {
     case 0:
for (i=0;i<32;i++){
P0=~hanzi[i*2];
   P2=~hanzi[i*2+1];
DelayUs(100); }
break;
case 1:
for (i=0;i<48;i++){
P0=~hanzi[64+i*2];
P2=~hanzi[64+i*2+1];
DelayUs(100); }
break;
   }

}
/*****显示子程序2（LOVE）*****/
void display2(void)
{
uchar i;
DelayUs(4000);
for(i=0;i<64;i++)
{
P0=~love[i*2];
P2=~love[i*2+1];
DelayUs(120);
}
}

/*****显示子程序3（心形图案）*****/
void display3(void)
{
uchar i;
DelayUs(4000);
for(i=0;i<64;i++)
{
P0=~loveyou[i*2];
P2=~loveyou[i*2+1];
DelayUs(120);
}
}

/*****显示子程序4（呵呵o(∩_∩)o图案）*****/
void display4(void)
{
uchar i;
DelayUs(4000);
for(i=0;i<64;i++)
{
P0=~hehe[i*2];
P2=~hehe[i*2+1];
DelayUs(120);
}
}

/*****主函数*****/
void main(void)
{
IT0=1;
EX0=1;
EA=1; //开中断，下降沿中断
KY=0;
while(1) //主程序中只检测按键
{
   if(KEY==0) //画面切换键按下
   {
   DelayUs(20000); //按键去抖
   if(KEY==0);
   pic++;
   }
   if(pic>3)pic=0;
}
}
/*****END*****/