I2C的不解

本帖最后由 234013819 于 2012-11-23 15:08 编辑

在下面的函数中 NumOfPage , NumOfSingle , Addr, count ;这四个变量代表什么意思啊？请帮助解释一下！谢谢谢谢了！
这个函数是把缓冲区中的数据写到EEPROM中


void I2C_EE_BufferWrite(u8* pBuffer, u8 WriteAddr, u16 NumByteToWrite)
{
  u8 NumOfPage = 0, NumOfSingle = 0, Addr = 0, count = 0;
  Addr = WriteAddr % I2C_PageSize;   // ？（I2C_PageSize代表AT24C02每页有8个字节）
  count = I2C_PageSize - Addr;    //?
  NumOfPage =  NumByteToWrite / I2C_PageSize;//?
  NumOfSingle = NumByteToWrite % I2C_PageSize;//?

  /* If WriteAddr is I2C_PageSize aligned  */
  if(Addr == 0)
  {
    /* If NumByteToWrite < I2C_PageSize */
    if(NumOfPage == 0)
    {
      I2C_EE_PageWrite(pBuffer, WriteAddr, NumOfSingle);
      I2C_EE_WaitEepromStandbyState();
    }
    /* If NumByteToWrite > I2C_PageSize */
    else  
    {
      while(NumOfPage--)
      {
        I2C_EE_PageWrite(pBuffer, WriteAddr, I2C_PageSize);
     I2C_EE_WaitEepromStandbyState();
        WriteAddr +=  I2C_PageSize;
        pBuffer += I2C_PageSize;
      }
      if(NumOfSingle!=0)
      {
        I2C_EE_PageWrite(pBuffer, WriteAddr, NumOfSingle);
        I2C_EE_WaitEepromStandbyState();
      }
    }
  }
  /* If WriteAddr is not I2C_PageSize aligned  */
  else
  {
    /* If NumByteToWrite < I2C_PageSize */
    if(NumOfPage== 0)
    {
      I2C_EE_PageWrite(pBuffer, WriteAddr, NumOfSingle);
      I2C_EE_WaitEepromStandbyState();
    }
    /* If NumByteToWrite > I2C_PageSize */
    else
    {
      NumByteToWrite -= count;
      NumOfPage =  NumByteToWrite / I2C_PageSize;
      NumOfSingle = NumByteToWrite % I2C_PageSize;
      
      if(count != 0)
      {  
        I2C_EE_PageWrite(pBuffer, WriteAddr, count);
        I2C_EE_WaitEepromStandbyState();
        WriteAddr += count;
        pBuffer += count;
      }
      
      while(NumOfPage--)
      {
        I2C_EE_PageWrite(pBuffer, WriteAddr, I2C_PageSize);
        I2C_EE_WaitEepromStandbyState();
        WriteAddr +=  I2C_PageSize;
        pBuffer += I2C_PageSize;  
      }
      if(NumOfSingle != 0)
      {
        I2C_EE_PageWrite(pBuffer, WriteAddr, NumOfSingle);
        I2C_EE_WaitEepromStandbyState();
      }
    }
  }  
}