立创k230linux镜像启动后进入parted,无法退出怎么解决？

使用 K230BurningTool.exe 烧录CanMV-K230_LCKFB_linux_v0.6.4_nncase_v2.9.0.img

U-Boot 2022.10 (Apr 02 2025 - 09:44:30 +0800)CPU:   rv64imafdcvsuModel: kendryte k230 canmv lckfbDRAM:  1 GiBCore:  26 devices, 13 uclasses, devicetree: embedMMC:   mmc0@91580000: 0, mmc1@91581000: 1Loading Environment from MMC... OKIn:    serial@91400000Out:   serial@91400000Err:   serial@91400000Net:   No ethernet found.Hit any key to stop autoboot:  0139720 bytes read in 10 ms (13.3 MiB/s)18485760 bytes read in 1043 ms (16.9 MiB/s)55140 bytes read in 4 ms (13.1 MiB/s)## Booting kernel from Legacy Image at 03000000 ...   Image Name:   linux   Created:      2025-04-02   1:44:44 UTC   Image Type:   RISC-V Linux Kernel Image (uncompressed)   Data Size:    139656 Bytes = 136.4 KiB   Load Address: 00000000   Entry Point:  00000000   Verifying Checksum ... OK## Flattened Device Tree blob at 02200000   Booting using the fdt blob at 0x2200000   Loading Kernel Image   Loading Device Tree to 000000000a0ef000, end 000000000a0ff763 ... OKStarting kernel ...OpenSBI v1.4   ____                    _____ ____ _____  / __                   / ____|  _ _   _| | |  | |_ __   ___ _ __ | (___ | |_) || | | |  | | '_  / _  '_  ___ |  _ < | | | |__| | |_) |  __/ | | |____) | |_) || |_  ____/| .__/ ___|_| |_|_____/|____/_____|        | |        |_|Platform Name             : Canaan CanMV-K230Platform Features         : medelegPlatform HART Count       : 1Platform IPI Device       : aclint-mswiPlatform Timer Device     : aclint-mtimer @ 27000000HzPlatform Console Device   : uart8250Platform HSM Device       : ---Platform PMU Device       : thead,c900-pmuPlatform Reboot Device    : ---Platform Shutdown Device  : ---Platform Suspend Device   : system-suspend-testPlatform CPPC Device      : ---Firmware Base             : 0x0Firmware Size             : 195 KBFirmware RW Offset        : 0x20000Firmware RW Size          : 67 KBFirmware Heap Offset      : 0x28000Firmware Heap Size        : 35 KB (total), 2 KB (reserved), 9 KB (used), 23 KB (free)Firmware Scratch Size     : 4096 B (total), 328 B (used), 3768 B (free)Runtime SBI Version       : 2.0Domain0 Name              : rootDomain0 Boot HART         : 0Domain0 HARTs             : 0*Domain0 Region00          : 0x0000000091400000-0x0000000091400fff M: (I,R,W) S/U: (R,W)Domain0 Region01          : 0x0000000f04008000-0x0000000f0400bfff M: (I,R,W) S/U: ()Domain0 Region02          : 0x0000000f04000000-0x0000000f04007fff M: (I,R,W) S/U: ()Domain0 Region03          : 0x0000000000000000-0x000000000001ffff M: (R,X) S/U: ()Domain0 Region04          : 0x0000000000020000-0x000000000003ffff M: (R,W) S/U: ()Domain0 Region05          : 0x0000000f00000000-0x0000000f03ffffff M: (I,R,W) S/U: (R,W)Domain0 Region06          : 0x0000000000000000-0xffffffffffffffff M: () S/U: (R,W,X)Domain0 Next Address      : 0x0000000000200000Domain0 Next Arg1         : 0x0000000002200000Domain0 Next Mode         : S-modeDomain0 SysReset          : yesDomain0 SysSuspend        : yesBoot HART ID              : 0Boot HART Domain          : rootBoot HART Priv Version    : v1.12Boot HART Base ISA        : rv64imafdcbvxBoot HART ISA Extensions  : sstc,zicntr,zihpm,zicboz,zicbom,svpbmtBoot HART PMP Reserved    : 2Boot HART PMP Count       : 64Boot HART PMP Granularity : 12 bitsBoot HART PMP Address Bits: 38Boot HART MHPM Info       : 16 (0x0007fff8)Boot HART MIDELEG         : 0x0000000000020222Boot HART MEDELEG         : 0x000000000000b109[    0.000000] Linux version 6.6.36 (gitlab@runner) (riscv64-unknown-linux-gnu-gcc (Xuantie-900 linux-6.6.0 glibc gcc Toolchain V2.10.1 B-20240712) 10.4.0, GNU ld (GNU Binutils) 2.35) #2 SMP Wed Apr  2 09:08:07 CST 2025[    0.000000] Machine model: Canaan CanMV-K230[    0.000000] SBI specification v2.0 detected[    0.000000] SBI implementation ID=0x1 Version=0x10004[    0.000000] SBI TIME extension detected[    0.000000] SBI IPI extension detected[    0.000000] SBI RFENCE extension detected[    0.000000] efi: UEFI not found.[    0.000000] OF: reserved mem: 0x0000000000000000..0x000000000001ffff (128 KiB) nomap non-reusable mmode_resv0@0[    0.000000] OF: reserved mem: 0x0000000000020000..0x000000000003ffff (128 KiB) nomap non-reusable mmode_resv1@20000[    0.000000] cma: Reserved 512 MiB at 0x0000000020000000 on node -1[    0.000000] Zone ranges:[    0.000000]   DMA32    [mem 0x0000000000000000-0x000000003fffffff][    0.000000]   Normal   empty[    0.000000] Movable zone start for each node[    0.000000] Early memory node ranges[    0.000000]   node   0: [mem 0x0000000000000000-0x000000000003ffff][    0.000000]   node   0: [mem 0x0000000000040000-0x000000003fffffff][    0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x000000003fffffff][    0.000000] SBI HSM extension detected[    0.000000] riscv: base ISA extensions acdfimv[    0.000000] riscv: ELF capabilities acdfimv[    0.000000] percpu: Embedded 20 pages/cpu s41464 r8192 d32264 u81920[    0.000000] pcpu-alloc: s41464 r8192 d32264 u81920 alloc=20*4096[    0.000000] pcpu-alloc: [0] 0[    0.000000] Kernel command line: root=/dev/mmcblk1p2 loglevel=8 rw rootdelay=4 rootfstype=ext4 console=ttyS0,115200  earlycon=sbi[    0.000000] Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes, linear)[    0.000000] Inode-cache hash table entries: 65536 (order: 7, 524288 bytes, linear)[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 258048[    0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off[    0.000000] Virtual kernel memory layout:[    0.000000]       fixmap : 0xffffffc6fea00000 - 0xffffffc6ff000000   (6144 kB)[    0.000000]       pci io : 0xffffffc6ff000000 - 0xffffffc700000000   (  16 MB)[    0.000000]      vmemmap : 0xffffffc700000000 - 0xffffffc800000000   (4096 MB)[    0.000000]      vmalloc : 0xffffffc800000000 - 0xffffffd800000000   (  64 GB)[    0.000000]      modules : 0xffffffff01220000 - 0xffffffff80000000   (2029 MB)[    0.000000]       lowmem : 0xffffffd800000000 - 0xffffffd840000000   (1024 MB)[    0.000000]       kernel : 0xffffffff80000000 - 0xffffffffffffffff   (2047 MB)[    0.000000] Memory: 470664K/1048576K available (11115K kernel code, 1131K rwdata, 5350K rodata, 447K init, 503K bss, 53624K reserved, 524288K cma-reserved)[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1[    0.000000] rcu: Hierarchical RCU implementation.[    0.000000] rcu:     RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=1.[    0.000000] rcu:     RCU debug extended QS entry/exit.[    0.000000]  Tracing variant of Tasks RCU enabled.[    0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.[    0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=1[    0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0[    0.000000] riscv-intc: 64 local interrupts mapped[    0.000000] plic: interrupt-controller@f00000000: mapped 208 interrupts with 1 handlers for 2 contexts.[    0.000000] riscv: providing IPIs using SBI IPI extension[    0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention.[    0.000000] clocksource: riscv_clocksource: mask: 0xffffffffffffffff max_cycles: 0x63a1e71a3, max_idle_ns: 440795203123 ns[    0.000000] sched_clock: 64 bits at 27MHz, resolution 37ns, wraps every 4398046511093ns[    0.000389] Console: colour dummy device 80x25[    0.000433] Calibrating delay loop (skipped), value calculated using timer frequency.. 54.00 BogoMIPS (lpj=108000)[    0.000444] pid_max: default: 32768 minimum: 301[    0.000507] LSM: initializing lsm=capability,integrity[    0.000594] Mount-cache hash table entries: 2048 (order: 2, 16384 bytes, linear)[    0.000604] Mountpoint-cache hash table entries: 2048 (order: 2, 16384 bytes, linear)[    0.002303] RCU Tasks Trace: Setting shift to 0 and lim to 1 rcu_task_cb_adjust=1.[    0.002409] riscv: ELF compat mode supported[    0.002437] ASID allocator using 16 bits (65536 entries)[    0.002560] rcu: Hierarchical SRCU implementation.[    0.002565] rcu:     Max phase no-delay instances is 1000.[    0.002772] EFI services will not be available.[    0.002905] smp: Bringing up secondary CPUs ...[    0.002921] smp: Brought up 1 node, 1 CPU[    0.003578] devtmpfs: initialized[    0.012316] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns[    0.012335] futex hash table entries: 256 (order: 2, 16384 bytes, linear)[    0.022314] pinctrl core: initialized pinctrl subsystem[    0.023317] NET: Registered PF_NETLINK/PF_ROUTE protocol family[    0.024427] DMA: preallocated 128 KiB GFP_KERNEL pool for atomic allocations[    0.024546] DMA: preallocated 128 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations[    0.024602] audit: initializing netlink subsys (disabled)[    0.025151] thermal_sys: Registered thermal governor 'step_wise'[    0.025209] audit: type=2000 audit(0.024:1): state=initialized audit_enabled=0 res=1[    0.025222] cpuidle: using governor menu[    0.048204] cpu0: Ratio of byte access time to unaligned word access is 6.32, unaligned accesses are fast[    0.048233] suspend: SBI SUSP extension detected[    0.053311] platform soc: Fixed dependency cycle(s) with /soc/interrupt-controller@f00000000[    0.108105] platform 90840000.vo: Fixed dependency cycle(s) with /soc/dsi@90850000[    0.108228] platform 90840000.vo: Fixed dependency cycle(s) with /soc/dsi@90850000[    0.108288] platform 90850000.dsi: Fixed dependency cycle(s) with /soc/dsi@90850000/panel@0[    0.108300] platform 90850000.dsi: Fixed dependency cycle(s) with /soc/vo@90840000[    0.110103] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages[    0.110111] HugeTLB: 16380 KiB vmemmap can be freed for a 1.00 GiB page[    0.110116] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages[    0.110119] HugeTLB: 28 KiB vmemmap can be freed for a 2.00 MiB page[    0.110677] ACPI: Interpreter disabled.[    0.111079] k230-powerdomain 91103000.sysctl_power: powerdomain init ok[    0.111611] iommu: Default domain type: Translated[    0.111619] iommu: DMA domain TLB invalidation policy: strict mode[    0.112027] SCSI subsystem initialized[    0.112242] libata version 3.00 loaded.[    0.112400] usbcore: registered new interface driver usbfs[    0.112429] usbcore: registered new interface driver hub[    0.112457] usbcore: registered new device driver usb[    0.113871] mc: Linux media interface: v0.10[    0.113930] videodev: Linux video capture interface: v2.00[    0.114179] Advanced Linux Sound Architecture Driver Initialized.[    0.115020] vgaarb: loaded[    0.115394] clocksource: Switched to clocksource riscv_clocksource[    0.115752] pnp: PnP ACPI: disabled[    0.123490] NET: Registered PF_INET protocol family[    0.123662] IP idents hash table entries: 16384 (order: 5, 131072 bytes, linear)[    0.124796] tcp_listen_portaddr_hash hash table entries: 512 (order: 2, 16384 bytes, linear)[    0.124834] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)[    0.124846] TCP established hash table entries: 8192 (order: 4, 65536 bytes, linear)[    0.124892] TCP bind hash table entries: 8192 (order: 7, 524288 bytes, linear)[    0.126362] TCP: Hash tables configured (established 8192 bind 8192)[    0.126474] UDP hash table entries: 512 (order: 3, 49152 bytes, linear)[    0.126563] UDP-Lite hash table entries: 512 (order: 3, 49152 bytes, linear)[    0.126791] NET: Registered PF_UNIX/PF_LOCAL protocol family[    0.127403] RPC: Registered named UNIX socket transport module.[    0.127413] RPC: Registered udp transport module.[    0.127416] RPC: Registered tcp transport module.[    0.127418] RPC: Registered tcp-with-tls transport module.[    0.127420] RPC: Registered tcp NFSv4.1 backchannel transport module.[    0.128380] PCI: CLS 0 bytes, default 64[    0.129187] Initialise system trusted keyrings[    0.129580] workingset: timestamp_bits=46 max_order=18 bucket_order=0[    0.130204] NFS: Registering the id_resolver key type[    0.130257] Key type id_resolver registered[    0.130261] Key type id_legacy registered[    0.130287] nfs4filelayout_init: NFSv4 File Layout Driver Registering...[    0.130291] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering...[    0.130495] fuse: init (API version 7.39)[    0.130661] 9p: Installing v9fs 9p2000 file system support[    0.130865] NET: Registered PF_ALG protocol family[    0.130876] Key type asymmetric registered[    0.130880] Asymmetric key parser 'x509' registered[    0.130929] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 243)[    0.130936] io scheduler mq-deadline registered[    0.130939] io scheduler kyber registered[    0.130964] io scheduler bfq registered[    0.146116] [K230_RESET]:sysctl reset phy addr 0x91101000[    0.146127] [K230_RESET]: ok![    0.191118] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled[    0.193575] printk: console [ttyS0] disabled[    0.213931] 91400000.serial: ttyS0 at MMIO 0x91400000 (irq = 79, base_baud = 3125000) is a 16550A[    0.213964] printk: console [ttyS0] enabled[    1.093275] 91403000.serial: ttyS3 at MMIO 0x91403000 (irq = 80, base_baud = 3125000) is a 16550A[    1.103594] SuperH (H)SCI(F) driver initialized[    1.109936] random: crng init done[    1.113393] k230-rng 91213000.trng: K230 TRNG driver register![    1.120314] i2c_add_driver start[    1.124057] canaan-vo 90840000.vo: probe[    1.128652] canaan-mipi-dsi 90850000.dsi: Fixed dependency cycle(s) with /soc/dsi@90850000/panel@0[    1.137726] mipi-dsi 90850000.dsi.0: Fixed dependency cycle(s) with /soc/dsi@90850000[    1.559440] canaan-mipi-dsi 90850000.dsi: Attached device universal[    1.567140] canaan-vo 90840000.vo: background color is ffffff[    1.573103] canaan-drm soc:display-subsystem: bound 90840000.vo (ops 0xffffffff80befc30)[    1.581254] canaan-drm soc:display-subsystem: bound 90850000.dsi (ops 0xffffffff80bf0150)[    1.590306] [drm] Initialized canaan-drm 1.0.0 20230501 for soc:display-subsystem on minor 0[    1.598861] canaan-drm soc:display-subsystem: [drm] bpp/depth value of 32/24 not supported[    1.607148] canaan-drm soc:display-subsystem: [drm] No compatible format found[    1.616120] canaan-drm soc:display-subsystem: [drm] *ERROR* fbdev: Failed to setup generic emulation (ret=-22)[    1.626166] canaan-drm soc:display-subsystem: [drm:canaan_drm_bind] Canaan K230 DRM driver register successfully[    1.637237] canaan-drm soc:display-subsystem: [drm] bpp/depth value of 32/24 not supported[    1.645554] canaan-drm soc:display-subsystem: [drm] No compatible format found[    1.657660] loop: module loaded[    1.662469] canaan-drm soc:display-subsystem: [drm] *ERROR* fbdev: Failed to setup generic emulation (ret=-22)[    1.690044] misc mmz: registered.[    1.697501] e1000e: Intel(R) PRO/1000 Network Driver[    1.702510] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.[    1.709919] usbcore: registered new device driver r8152-cfgselector[    1.716257] usbcore: registered new interface driver r8152[    1.721779] usbcore: registered new interface driver asix[    1.727207] usbcore: registered new interface driver ax88179_178a[    1.733325] usbcore: registered new interface driver cdc_ether[    1.739185] usbcore: registered new interface driver net1080[    1.744871] usbcore: registered new interface driver cdc_subset[    1.750820] usbcore: registered new interface driver zaurus[    1.756432] usbcore: registered new interface driver cdc_ncm[    1.762122] usbcore: registered new interface driver r8153_ecm[    1.769139] dwc2 91500000.usb: supply vusb_d not found, using dummy regulator[    1.776456] dwc2 91500000.usb: supply vusb_a not found, using dummy regulator[    1.903445] dwc2 91500000.usb: EPs: 7, dedicated fifos, 3016 entries in SPRAM[    1.910741] dwc2 91500000.usb: DWC OTG Controller[    1.915487] dwc2 91500000.usb: new USB bus registered, assigned bus number 1[    1.922565] dwc2 91500000.usb: irq 85, io mem 0x91500000[    1.928015] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.06[    1.936294] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1[    1.943523] usb usb1: Product: DWC OTG Controller[    1.948233] usb usb1: Manufacturer: Linux 6.6.36 dwc2_hsotg[    1.953810] usb usb1: SerialNumber: 91500000.usb[    1.958899] hub 1-0:1.0: USB hub found[    1.962734] hub 1-0:1.0: 1 port detected[    1.967433] dwc2 91540000.usb: supply vusb_d not found, using dummy regulator[    1.974720] dwc2 91540000.usb: supply vusb_a not found, using dummy regulator[    2.099466] dwc2 91540000.usb: EPs: 7, dedicated fifos, 3016 entries in SPRAM[    2.116814] dwc2 91540000.usb: DWC OTG Controller[    2.121561] dwc2 91540000.usb: new USB bus registered, assigned bus number 2[    2.128640] dwc2 91540000.usb: irq 86, io mem 0x91540000[    2.134095] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.06[    2.142374] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1[    2.149611] usb usb2: Product: DWC OTG Controller[    2.154321] usb usb2: Manufacturer: Linux 6.6.36 dwc2_hsotg[    2.159897] usb usb2: SerialNumber: 91540000.usb[    2.165017] hub 2-0:1.0: USB hub found[    2.168845] hub 2-0:1.0: 1 port detected[    2.173639] usbcore: registered new interface driver usb-storage[    2.179989] mousedev: PS/2 mouse device common for all mice[    2.186659] i2c_dev: i2c /dev entries driver[    2.191273] edt_ft5x06 1-0038: supply vcc not found, using dummy regulator[    2.198310] edt_ft5x06 1-0038: supply iovcc not found, using dummy regulator[    2.207166] MVX dev: Linlon v5276 identified. cores=1, nlsid=4, id=0. (mvx_dev.c:416)[    2.215296] usbcore: registered new interface driver uvcvideo[    2.249727] sdhci: Secure Digital Host Controller Interface driver[    2.255961] sdhci: Copyright(c) Pierre Ossman[    2.260989] sdhci-pltfm: SDHCI platform and OF driver helper[    2.268204] Kendryte crypto driver probe![    2.272749] Kendryte sha256 driver probe![    2.277323] Kendryte RSA driver probe![    2.281346] usbcore: registered new interface driver usbhid[    2.286945] usbhid: USB HID core driver[    2.294111] riscv-pmu-sbi: SBI PMU extension is available[    2.299596] riscv-pmu-sbi: 16 firmware and 18 hardware counters[    2.330687] mmc0: SDHCI controller on 91580000.sdhci0 [91580000.sdhci0] using ADMA[    2.338370] mmc1: SDHCI controller on 91581000.sdhci1 [91581000.sdhci1] using ADMA[    2.350376] sdhci-dwcmshc-kendryte 91580000.sdhci0: card claims to support voltages below defined range[    2.360832] mmc1: Got command interrupt 0x00000001 even though no command operation was in progress.[    2.369968] mmc1: sdhci: ============ SDHCI REGISTER DUMP ===========[    2.376407] mmc1: sdhci: Sys addr:  0x00000000 | Version:  0x00000005[    2.382846] mmc1: sdhci: Blk size:  0x00000000 | Blk cnt:  0x00000000[    2.389284] mmc1: sdhci: Argument:  0x00000000 | Trn mode: 0x00000000[    2.395722] mmc1: sdhci: Present:   0x03ff0000 | Host ctl: 0x00000000[    2.402160] mmc1: sdhci: Power:     0x0000000f | Blk gap:  0x00000000[    2.408599] mmc1: sdhci: Wake-up:   0x00000000 | Clock:    0x00007d27[    2.415037] mmc1: sdhci: Timeout:   0x00000000 | Int stat: 0x00000000[    2.421475] mmc1: sdhci: Int enab:  0x00ff1083 | Sig enab: 0x00ff1083[    2.427913] mmc1: sdhci: ACmd stat: 0x00000000 | Slot int: 0x00000000[    2.434350] mmc1: sdhci: Caps:      0x276a6481 | Caps_1:   0x08008071[    2.440789] mmc1: sdhci: Cmd:       0x00000502 | Max curr: 0x00000000[    2.447226] mmc1: sdhci: Resp[0]:   0x000001aa | Resp[1]:  0x00000000[    2.453663] mmc1: sdhci: Resp[2]:   0x00000000 | Resp[3]:  0x00000000[    2.460101] mmc1: sdhci: Host ctl2: 0x00000000[    2.464541] mmc1: sdhci: ADMA Err:  0x00000000 | ADMA Ptr: 0x00000000[    2.470978] mmc1: sdhci: ============================================[    2.481903] mmc0: new high speed SDIO card at address 0001[    2.512917] mmc1: new high speed SDHC card at address 21b7[    2.518876] mmcblk1: mmc1:21b7 APPSD 29.1 GiB[    2.528688] Alternate GPT is invalid, using primary GPT.[    2.534043]  mmcblk1: p1 p2[    2.563467] edt_ft5x06 1-0038: touchscreen probe failed[    2.568876] edt_ft5x06: probe of 1-0038 failed with error -121[    2.739241] NET: Registered PF_INET6 protocol family[    2.745030] Segment Routing with IPv6[    2.748762] In-situ OAM (IOAM) with IPv6[    2.752749] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver[    2.759141] NET: Registered PF_PACKET protocol family[    2.764311] 9pnet: Installing 9P2000 support[    2.768661] Key type dns_resolver registered[    2.772989] start plist test[    2.778476] end plist test[    2.788871] Loading compiled-in X.509 certificates[    2.799167] debug_vm_pgtable: [debug_vm_pgtable         ]: Validating architecture page table helpers[    2.818246] cfg80211: Loading compiled-in X.509 certificates for regulatory database[    2.828255] Loaded X.509 cert 'wens: 61c038651aabdcf94bd0ac7ff06c7248db18c600'[    2.836255] Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'[    2.842015] clk: Disabling unused clocks[    2.846046] ALSA device list:[    2.849033]   #0: K230_I2S_INNO[    2.852487] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2[    2.861140] cfg80211: failed to load regulatory.db[    2.866110] Waiting 4 sec before mounting root device...^C[    7.965496] EXT4-fs (mmcblk1p2): warning: mounting fs with errors, running e2fsck is recommended[    8.310542] EXT4-fs (mmcblk1p2): recovery complete[    8.633134] EXT4-fs (mmcblk1p2): mounted filesystem d69b4bbd-94a6-48fe-9026-1ee5a8047ffc r/w with ordered data mode. Quota mode: disabled.[    8.645643] VFS: Mounted root (ext4 filesystem) on device 179:2.[    8.652132] devtmpfs: mounted[    8.655204] Freeing unused kernel image (initmem) memory: 444K[    8.661061] Kernel memory protection not selected by kernel config.[    8.667341] Run /sbin/init as init process[    8.671442]   with arguments:[    8.674407]     /sbin/init[    8.677117]   with environment:[    8.680261]     HOME=/[    8.682618]     TERM=linux[    8.831446] EXT4-fs (mmcblk1p2): re-mounted d69b4bbd-94a6-48fe-9026-1ee5a8047ffc r/w. Quota mode: disabled.Seeding 256 bits and creditingSaving 256 bits of creditable seed for next bootStarting syslogd: OKStarting klogd: OKRunning sysctl: OK[   14.155841] EXT4-fs error (device mmcblk1p2): ext4_validate_block_bitmap:421: comm ext4lazyinit: bg 1009: bad block bitmap checksum[   14.188562] EXT4-fs error (device mmcblk1p2): ext4_validate_block_bitmap:421: comm ext4lazyinit: bg 1137: bad block bitmap checksum[   14.246373] EXT4-fs error (device mmcblk1p2): ext4_validate_block_bitmap:421: comm ext4lazyinit: bg 1265: bad block bitmap checksum[   14.304586] 8189fs: loading out-of-tree module taints kernel.[   14.892768] EXT4-fs error (device mmcblk1p2): ext4_validate_block_bitmap:421: comm ext4lazyinit: bg 1393: bad block bitmap checksum[   14.913424] EXT4-fs error (device mmcblk1p2): ext4_validate_block_bitmap:421: comm ext4lazyinit: bg 1521: bad block bitmap checksum[   14.933195] EXT4-fs error (device mmcblk1p2): ext4_validate_block_bitmap:421: comm ext4lazyinit: bg 1649: bad block bitmap checksum[   14.960036] EXT4-fs error (device mmcblk1p2): ext4_validate_block_bitmap:421: comm ext4lazyinit: bg 1777: bad block bitmap checksum[   14.991510] EXT4-fs error (device mmcblk1p2): ext4_validate_block_bitmap:421: comm ext4lazyinit: bg 1905: bad block bitmap checksum[   15.021934] EXT4-fs error (device mmcblk1p2): ext4_validate_block_bitmap:421: comm ext4lazyinit: bg 2033: bad block bitmap checksum[   15.053363] EXT4-fs error (device mmcblk1p2): ext4_validate_block_bitmap:421: comm ext4lazyinit: bg 2161: bad block bitmap checksum[   15.131002] aic_bluetooth_mod_init[   15.134539] RELEASE DATE:2024_0929_2e313139[   15.138980] usbcore: registered new interface driver aic_load_fw[   15.375482] usbcore: registered new interface driver aic8800_fdrv[   16.740220] Bluetooth: Core ver 2.22[   16.743884] NET: Registered PF_BLUETOOTH protocol family[   16.749211] Bluetooth: HCI device and connection manager initialized[   16.755581] Bluetooth: HCI socket layer initialized[   16.760468] Bluetooth: L2CAP socket layer initialized[   16.765535] Bluetooth: SCO socket layer initialized[   16.776934] aic_btusb: AICBT_RELEASE_NAME: 202012_ANDROID[   16.782393] aic_btusb: AicSemi Bluetooth USB driver module init, version 2.1.0[   16.789626] aic_btusb: RELEASE DATE: 2023_1211_1958 CONFIG_BLUEDROID =0[   16.789626][   16.797961] usbcore: registered new interface driver aic_btusbStarting system message bus: doneStarting bluetoothd: OKStarting network: Waiting for interface eth0 to appear............... timeout!run-parts: /etc/network/if-pre-up.d/wait_iface: exit status 1FAILStarting sntp: sntp 4.2.8p17@1.4004-o Wed Apr  2 01:25:49 UTC 2025 (1)pool.ntp.org lookup error Temporary failure in name resolutionFAILStarting ntpd: OKStarting sshd: OKStarting telnetd: OKfirst boot flagError: The backup GPT table is corrupt, but the primary appears OK, so that willbe used.parted: invalid token: aparted: invalid token: asdsaparted: invalid token: s/dev/mmcblk1lid token:parted: invalid token: sparted: invalid token:parted: invalid token: /dev/mmcblk1lidparted: invalid token: /dev/mmcblk1lidparted: invalid token: /dev/mmcblk1lidparted: invalid token: printparted: invalid token: print[  316.387379] EXT4-fs (mmcblk1p2): error count since last fsck: 88[  316.393416] EXT4-fs (mmcblk1p2): initial error at time 16: ext4_validate_block_bitmap:421[  316.401598] EXT4-fs (mmcblk1p2): last error at time 15: ext4_validate_block_bitmap:421        检查下下载的文件md5是否正确，或者换个tf卡重新试下。